Quick Start Guide
QUICK START GUIDE
B-HYVE XD BLUETOOTH®
HOSE FAUCET TIMER
FAUCET
CONNECTION
OUTLET
RAINDELAY
ICON
FILTER
DIAL
LOW
BATTERY
INDICATOR
BLUETOOTH®
ICON
Write down the MAC address: 12 digit alphanumeric
code located on the bottom of the timer.
Timer MAC Address: __ __ :__ __ :__ __ :__ __ :__ __ :__ __
Installing the Batteries
Insert two AA (1.5V) alkaline batteries (not included) and
replace the tray.
Replace batteries when low battery icon appears
on display.
Used up or dead batteries must be removed
from the timer and disposed of properly. Do not
dispose of batteries in fire. Batteries may explode
or leak. Remove batteries when storing timer.
Note: Firmly replace the battery tray to ensure water
resistance and increase battery life. You will know the
battery tray is fully inserted if it does not pull out easily.
Open the B-hyve® App
Log into your B-hyve account and tap “My B-hyve”. Go
to “devices” then “add device”. Select the B-hyve XD
timer with two outlets. The app will walk you through
the rest of the process.
For new users, search apps for “B-hyve” and
download the free Android or iOS app. Create an
account to begin setup.
The Bluetooth® icon on the display should be
flashing indicating the timer is in pairing mode.
If at any time you need to re-pair or do a factory
reset, turn the dial so the arrow is pointing to
OFF, press and hold the dial for 5 seconds.
Note: Your LCD will show Lock Icon to indicate that the
timer is using the B-hyve app to program your timer.
Note: When the display shows a full screen of symbols
release the dial. The display will show 12:00pm in the
AUTO/MANUAL mode verifying the reset has been
completed. Resetting the timer will erase all programs
and it will have to reprogrammed to your desired
watering schedule.
PROGRAMMING THE TIMER
AT THE FAUCET
PROGRAMMING THE TIMER
WITH BLUETOOTH®
Set Clock
1. Turn the dial so the arrow is pointing to SET CLOCK.
2. Press the dial to select, the hour will begin to flash.
3. Turn the dial until current hour is displayed including
the correct AM or PM, then press dial to confirm. The
minutes will begin to flash, indicating the next step.
4. Turn the dial until the current minutes are displayed,
then press dial to confirm.
Programming Zones 2-4
1. Turn the dial so the arrow is pointing to START TIME.
2. Press the ZONE button to select zone [2], [3], or [4],
this will set that Zone as the default station.
3. With that zone now selected, repeat the steps for
Start Time, How Long, and How Often.
Repeat these steps to program all zones.
Start Time
1. Turn the dial so the arrow is pointing to START TIME.
2. Zone [1] is automatically selected 9noted by the box
around it.)
3. Press the dial to select, the hour will begin to flash.
4. Turn the dial until the desired start time hour is
displayed including the correct AM or PM, then press
dial to confirm. The minutes will begin to flash, indicating
the next step.
5. Turn the dial until the desired minutes are
displayed, then press dial to confirm.
How Often
1. Turn the dial so the arrow is pointing to HOW OFTEN,
zone [1] is automatically selected.
2. Press the dial to select, the number will begin to flash.
3. Turn the dial until the desired number of hours or days
is displayed, then press to confirm. You may choose to
water every 1 hour, 3 hours, 6 hours, 12 hours, or
from 1 to 7 days.
Note: 1 is every day, 2 is every other day, etc.
How Long
1. Turn the dial so the arrow is pointing to HOW LONG,
zone [1] is automatically selected.
2. Press the dial to select, the minutes will begin to flash.
3. Turn the dial until the desired number of minutes are
displayed. Select between 1 to 360 minutes then press
dial to confirm
Congratulations!
Zone 1 is now programmed. Turn your dial to AUTO to
allow your timer to water according to programmed
time and frequency, or complete the steps to program
zone 2-4.
more information on back
Printers are responsible
for meeting print
production requirements.
Any changes must be
approved by Orbit
®
.
Printed piece must meet
designated specifications
on this form.
© 2020 Orbit Inc.
This work is the property
of Orbit
®
, and cannot
be used, reproduced or
distributed in any way
without their express
permission.
Dieline
PMS
0000
Fold
PMS
0000
Product
Coverage
PMS
0000
Dims./
Callout
PMS
0000
∙
∙
∙
∙
Orbit
®
1.801.299.5555
orbitonline.com
K
Glue
Folded Flat Additional Information
PRIN TERS ARE
REQUIRED TO MATCH
ALL SP ECIFIED
PMS COLORS.
DATE: 12/17/2020
DESIGNER: QW MARKETING: DC
SOFTWARE: Adobe Indesign CC
ARTWORK №: 24634-24 rA
L:
W:
H:
_._" W:
H:_._"
_._"
22.5"
5.5"
HT34BT