User's Manual

Scan for full User Manual
bhyve.orbitonline.com
WIFI SPRINKLER TIMER
SMART WIFI SPRINKLER TIMER
Quick
Start
Guide
Welcome to
Printers are responsible
for meeting print
production requirements.
Any changes must be
approved by Orbit
®
.
Printed piece must meet
designated specifications
on this form.
© 2014 Orbit Inc.
This work is the property
of Orbit
®
, and cannot
be used, reproduced or
distributed in any way
without their express
permission.
Dieline
PMS
7405
Fold
PMS
0000
Product
Coverage
PMS
0000
Dims./
Callout
PMS
Cool
Gray 10
∙
∙
∙
∙
Orbit
®
1.801.299.5555
orbitonline.com
K
Glue
Folded Flat Additional Information
PRINTERS ARE
REQUIRED TO MATCH
ALL SPECIFIED
PMS COLORS.
DATE: 10/09/2017
DESIGNER: KM MARKETING: MS
SOFTWARE: Adobe Indesign CC
ARTWORK №: 57946-50 rH
L:
W:
H:
000.000" W:
H:6.0"
6.0"
24.0"
6.0"
Contents in the Box
FCC and IC Statemen Déclaration de FCC et l’IC
WiFi Sprinkler Timer
Screwdriver
Mounting Srews and Anchors
Keys
Quick Start Guide
Install the B-hyve™ app on
your smart device
You will need a smart device to connect
the timer to Wi-Fi. After the timer is
paired, you can also use a computer to
adjust your timer.
Note: There is a wizard in the app to
guide you through initial set up of your
sprinkler timer. In addition, there are
help icons throughout the app with
more information and useful tips.
Timer Connected Symbol
Rain Delay
Calendar
Programs
Remote Control
or Home Button
Zone List
Settings
Next Zone
Stop Watering
Running Status/Messaging
Weather/Temp.
The B-hyve™ App
Rated input:
Australia—240V AC 50/60Hz 0.15A | Europe—230V
AC 50/60Hz 0.15A | USA—120V AC 60Hz 0.15A
Max load:
AUS & EU—24V AC 1 Amp 50/60 Cycle | USA—24V
AC 750 mA 60Hz
Temperature Operating Range:
Operating: 32-158° F (0-70° C) | Storage & transport:
32-176° F (0-80° C)
Humidity Operating Range:
Operating: 0–80% | Storage & transport: 0–90%
Altitude:
6,500' (2,000 meters) IPX5 Rating
Installation Class II | Over Voltage Category II
Battery Specifications
Timer requires a CR2032 Lithium battery
(included)
To remove, lift battery cover with a screwdriver
and remove battery with fingers.
Insert the new battery at an angle and press to
click the battery into place. The plus (+) sign on
the battery must face upwards.
WARNING: Risk of Fire, Explosion, and Electric
Shock. Replace battery with Hitachi Maxell Ltd,
Type CR2032 only. Use of a different battery
has the potential for a risk of fire, explosion, and
electric shock.
WARNING: Battery must be removed
from the timer before it is scrapped.
WARNING: The timer must be
disconnected from the supply mains
when removing the battery.
BATTERY WARNING: Chemical Burn Hazard.
Keep batteries away from children.
This product contains a lithium coin cell battery. If
a new or used button/coin cell battery is swallowed
or enters the body, it can cause severe internal
burns and can lead to death in as little as two hours.
Always completely secure the battery compartment.
If the battery compartment does not close securely,
stop using the product, remove the battery, and
keep it away from children. If you think the battery
might have been swallowed or placed inside any
part of the body, seek immediate medical attention.
The battery should be disposed of properly and
kept away from children. Even used batteries may
cause injury.
Specifications
57946-50 rH
Help
If the app and the website don’t have what you’re
looking for, please call our technical support line
before returning this sprinkler timer to the store.
1-800-488-6156 or 1-801-299-5555
www.orbitonline.com | bhyve.orbitonline.com
This device complies with Part 15 of the FCC Rules and Industry
Canada license exempt RSS standards. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
FCC Warning: Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device meets the FCC and IC requirements for RF exposure
in public or controlled environments. The end user is advised to
maintain a distance of 20 cm from the controller and any personnel
to ensure compliance with RF exposure regulations.
This Class B digital apparatus complies with Canadian ICES-003
Cet appareil est conforme à la section 15 de la Règlementation
de la FCC et la norme RSS d’Industry Canada.
Son fonctionnement est soumis aux deux conditions suivantes:
(1) cet appareil ne doit pas causer d’interférences nuisibles, et
(2) cet appareil doit tolérer toutes les interférences, dont les
interférences pouvant causer un fonctionnement non désiré.
Cet appareil numérique de classe B est conforme à la norme
canadienne ICES-003.
Remarque: cet appareil été testé et déclaré conforme aux
limites d’exposition pour les appareils numériques de classe
B, selon la section 15 de la Règlementation de la FCC. Ces
limites sont conçus pour fournir une protection raisonnable
contre les interférences nuisibles dans une installation
résidentielle. Cet appareil produit, utilise et peut émettre de
l’énergie radio fréquence et, si elle n’est pas installée et utilisée
conformément aux instructions, peut causer des interférences
nuisibles aux communications radio. Cependant, il n’est pas
garantie que des interférences ne se produisent pas dans une
installation particulière. Si cet appareil cause des interférences
gênantes à la réception d’un signal radio ou de télévision, ce
qui peut être déterminé en allumant et en éteignant l’appareil,
l’utilisateur peut corriger les interférences en suivants une des
mesures suivantes :
• Réorientez ou repositionnez l’antenne de réception.
• Augmentez la distance entre l’appareil et le récepteur.
• Branchez l’appareil dans une prise sur un circuit différent du
circuit sur lequel le récepteur est branché.
• Consulter le revendeur ou un technicien radio/TV
expérimenté pour obtenir de l’aide.
Cet appareil est conforme aux exigences de la FCC et de l’IC
concernant l’exposition aux ondes dans un environnement
public ou contrôlé. Il est conseillé à l’utilisateur final de
maintenir une distance de 20 cm du contrôleur pour assurer
la conformité aux réglementations d’exposition RF. Information
de conformité pour le Canada
Acts as a hub for other
B-hyve™ products
Compatible with other B-hyve products