User's Manual

ManualsBrandsOrange Electronic ManualsElectronicsTPMS

Manual for Tire Pressure Monitoring Systems, TPMS

1/21

To ensure correct operation and service please read these instructions before installing and

operating the TPMS

TPMS Manual

TABLE OF CONTENTS

TIRE PRESSURE MONITORING SYSTEMS, TPMS ................................................ 2

NOTICE ..................................................................................................................... 2

SPECIFICATIONS OF TPMS .................................................................................... 3

SYSTEM INSTALLATION ......................................................................................... 3

ACCESSORIES FOR TIRE PRESSURE MONITORING SYSTEM ........................... 3

OPTIONAL ACCESSORY PART ................................................................................

WIRELESS TRANSMITTER SENSOR INSTALLATION ........................................... 5

SYSTEM OPERATION .............................................................................................. 6

SYSTEM ALARM ...................................................................................................... 7

SETUP METHOD ...................................................................................................... 7

Front and Rear Standard Tire Pressure ................................................................................

Tire Over Temperature Warning ............................................................................................

Alarm Instruction ....................................................................................................................

RESET FOR TIRE CHANGES AND ROTATION ........................................................

Mode 1: Front to rear tires exchanged ............................................................................ 12

Mode 2: Tires diagonal exchanged ......................................................................................

Mode 3: Front tires diagonal exchanged, and Rear tires parallel changed to Front. .....

Mode 4: Random re-position tires ........................................................................................

Mode 5: Single sensor replaced ...........................................................................................

APPENDIX

..............................................................................................................................

ANNEXES

...............................................................................................................................

WARRANTY POLICY .................................................................................................

TROUBLESHOOTING GUIDE

..................................................................

Summary of content (21 pages)

PAGE 1
Manual for Tire Pressure Monitoring Systems, TPMS To ensure correct operation and service please read these instructions before installing and operating the TPMS TPMS Manual TABLE OF CONTENTS TIRE PRESSURE MONITORING SYSTEMS, TPMS ................................................ 2 NOTICE ..................................................................................................................... 2 SPECIFICATIONS OF TPMS ...............................................................................
PAGE 2
Manual for Tire Pressure Monitoring Systems, TPMS Tire Pressure Monitoring Systems, TPMS Tire Pressure Monitoring Systems (TPMS) improves safety while driving. Once installed in your vehicle, the system will automatically monitor your tires in real-time for pressure and temperature. When any tire’s pressure and/or temperature appear abnormal, the system will, in real-time, transmit signals to active an alarm and show a digital figure to warn the driver of a problem.
PAGE 3
Manual for Tire Pressure Monitoring Systems, TPMS Reacting to Alerts When an alert or warning is received, reduce vehicle’s speed and proceed to a safe location to stop where the tire can be inspected and /or serviced. The low-pressure alert indicates that the air pressure has dropped to a selected minimum and a high-temperature alert indicates that the temperature of the tire content has surpassed the threshold value set.
PAGE 4
Manual for Tire Pressure Monitoring Systems, TPMS F Screw for Tire Valves (Nylok screw) 4 G Magnetic windshield holder 1 H Manual 1 Caution: the power connection is NOT COMPATABLE with USB interface; please do not plug in any USB devices. Display Unit Installation 1. Plug in one side of C the power cable connection into A the display located on the side. 2. Connect the power cable C into the vehicle’s cigarette lighter socket for power connection.
PAGE 5
Manual for Tire Pressure Monitoring Systems, TPMS Wireless Transmitter Sensor Installation 步驟操作流程圖示 1 Use a jack to raise the vehicle and place jack stands underneath the vehicle for safety. Refer to vehicle owner’s manual for full service advice. Seek the assistance of a qualified motor mechanic if required. 2 Take off the tires and bleed the air. Then take off the air valve of the tire from the wheel. (NOTE: You must change the valve to TPMS valve).
PAGE 6
Manual for Tire Pressure Monitoring Systems, TPMS 5 Use the new TPMS special Nylok screw (F) to tighten the transmitter sensor into the valve on the wheel. 6 Adjust the transmitter sensor angle so that the transmitter fits tightly on the wheel and then tighten the screw for the transmitter’s sensor so that it is fixed on the wheel.。 7 Clean inside the tire to prevent the tire from damaging the transmitter sensor. Inflate the tires. 8 9 10 Balance the tire a.
PAGE 7
Manual for Tire Pressure Monitoring Systems, TPMS System Alarm The alarm system will start, if tire pressure is too low, and if tire temperature is too high, the alarm system will start too. If high tire temperature and low tire pressure situation happen at the same time, the system will show low tire pressure at first and then show tire temperature, both of tire pressure and temperature will show on the screen for six seconds by turns.
PAGE 8
Manual for Tire Pressure Monitoring Systems, TPMS 2 3 If the pressure unit is chosen. Press the function key for 3 seconds, it will switch to kPa, psi, bar in turn. Once the preferred unit is chosen release the function key. If the temperature unit is chosen. Press the function key for 3 seconds, it will switch to ℃ and ℉ in turn. Once the preferred unit is chosen release the function key.
PAGE 9
Manual for Tire Pressure Monitoring Systems, TPMS Tire Under Pressure Warning Step 1 2 3 4 5 6 Operation process Pressing the setup key for over 3 seconds can change to the low pressure set up mode.。 Photograph 【Set】】Key The wireless receiver and display unit will show the low tire pressure preset default (34 psi / 230 kPa / 2.3 bar). By pressing the function key once, the psi value will add 1 unit; and the unit value will return to 20 psi when it has reached 48 psi.
PAGE 10
Manual for Tire Pressure Monitoring Systems, TPMS 3 Press the function key to change the high temperature figure. o The high temperature figure set up range is from 60 C to o value will add 1 unit; and the unit value will 100 C ( the return to 140 when it has reached 212 ), the driver can continually push the function key to adjust the appropriate high temperature figure. When the tire temperature exceeds this setting, the system will generate the warning signals.
PAGE 11
Manual for Tire Pressure Monitoring Systems, TPMS 6 When it lasts 20 minutes above that wireless receiver couldn’t receive one of the signal from wireless transmitter sensor, the display will show E2; E1 indicates all wireless transmitter sensor not receivable. Note when display unite shows E1 or E2, place any wireless devices (cell phone, etc) further away from display unit or locate a qualified tire service center to correct the issue.
PAGE 12
Manual for Tire Pressure Monitoring Systems, TPMS Mode 1: Front to rear tires exchanged Step Operation process 1 Rotate the tires. Front to Rear, and Rear to Front. To prevent incorrect positioning, mark the tires. 2 Press both the setup key and function key simultaneously for 5 seconds. The display will flash red, and a “beep” sound will be heard. You can release the buttons, and the system will have entered into mode 1. 3-1 After entering mode 1, the display will show “ 1”.
PAGE 13
Manual for Tire Pressure Monitoring Systems, TPMS ： Mode 2 Tires diagonal exchanged 步驟操作流程圖示 1 Rotate the tires diagonally. To prevent from incorrect positioning, mark the tires. 2 Press both the setup key and function key simultaneously for 5 seconds. The display will flash red, and a “beep” sound will be heard. You can release the buttons, and the system has entered into mode 1. If press function key again, then the system has entered into mode 2.
PAGE 14
Manual for Tire Pressure Monitoring Systems, TPMS ：Front tires diagonal exchanged, and Rear tires parallel changed to Front Mode 3 Step Operation process 1 Rotate the front tires diagonally to the rear, and the rear tires parallel to the front. To prevent incorrect positioning, mark the tires. 2 Press both the setup key and function key simultaneously for 5 seconds. The display will flash red light, and a “beep” sound will be heard.
PAGE 15
Manual for Tire Pressure Monitoring Systems, TPMS ：Random re-position tires Mode 4 Step Operation process 1 The tire shop will check the tire for abrasion and rotate tires into the appropriate position. 2 Press both the setup key and function key simultaneously for 5 seconds. The display will flash red, and a “beep” sound will be heard. You can release the buttons the system will have entered into mode 1.
PAGE 16
Manual for Tire Pressure Monitoring Systems, TPMS 4 Repeat the 3-2 step above for tire No.2, No.3 and No.4 System will be back to monitoring condition automatically, and receiver start to receive signals of tire pressure & tire temperature, new signal will be arrived in 3 minutes.
PAGE 17
Manual for Tire Pressure Monitoring Systems, TPMS ： Single sensor replaced Mode 5 Step Operation process 1 Take off the broken sensor and replace it with a new sensor. ( if you are only checking for a signal problem from Mode 4 instructions, there is no need to take off the sensor) 2 Press both the setup key and function key simultaneously for 5 seconds. The display will flash red, and a “beep” sound will be heard. You can release the buttons, and the system will have entered into mode 1.
PAGE 18
Manual for Tire Pressure Monitoring Systems, TPMS Appendix Glossary kPa Pressure reading in Kilo Pascal psi Pressure reading in pound per square inch bar Pressure reading in bar ℃ ℉ Temperature reading in degrees Celsius Inflating Pressure environment Recommended inflation pressure of a tire at ambient temperature of 25℃ by vehicle manufacturers. Visual and audible warning, this is activated when the tire’s pressure goes below the preset level.
PAGE 19
Manual for Tire Pressure Monitoring Systems, TPMS Annex 2 ℃ -40 -30 -20 -10 0 10 ℃ To ℉and ℉ To ℃ Conversion Table ℃ ℉ ℉ ℃ -40 -22 -4 14 32 50 20 30 40 50 60 70 68 86 104 122 140 158 80 90 100 110 120 125 ℉ 176 194 212 230 248 257 Warranty Policy We warrant our products for one year (365 days) from the date of original purchase to be free from defects in materials and workmanship.
PAGE 20
Manual for Tire Pressure Monitoring Systems, TPMS Troubleshooting Guide 1. The receiver shows no display after its power is turned on. 1.The power cord connector is not in full contact with the receiver Solution: Remove the power cord and plug it into the outlet again until it is seated completely. 2.The power cord has failed Solution：Ask your distributor to have your power cord replaced and send the failed one back to its manufacturer for repair. 3. The battery is run out of power.
PAGE 21
Manual for Tire Pressure Monitoring Systems, TPMS 4. The receiver cannot receive signal from any of the four tires after its power is turned on the numeric values representing tire locations displayed on the screen all become “E1”. 1. There is interference from other electronic device in the vehicle. ： Solution Remove other electronic device in the vehicle to determine if there is other interference. 2. The inner circuits of the display panel has failed.