User's Manual

Orange ID Programmer Manual

ID-Programming Procedure

1. Prepare OE sensor, ID Programmer

and Orange blank sensor

2. Press “Fun” key to turn on ID

Programmer

3. Find out OE sensor ID #

4. Input OE sensor ID #

5. Press “TX” key

6. ID-writing processing

7. Wait for “OK”

1. Prepare OE sensor, ID Programmer and Orange blank sensor

2. Press “Fun” key to turn on ID Programmer 3. Find out OE sensor ID # 4. Input OE sensor ID #

5. Press “TX” key 6. ID-Writing processing 7. Wait for “OK”

OE sensor Orange sensor

ID Programmer

PAGE 1
Orange ID Programmer Manual OE sensor Orange sensor ID Programmer 1. Prepare OE sensor, ID Programmer and Orange blank sensor 2. Press “Fun” key to turn on ID Programmer 3. Find out OE sensor ID # 4. Input OE sensor ID # ID-Programming Procedure 1. Prepare OE sensor, ID Programmer and Orange blank sensor 2. Press “Fun” key to turn on ID 3. 4. 5. 6. 7. Programmer Find out OE sensor ID # Input OE sensor ID # Press “TX” key ID-writing processing Wait for “OK” 5. Press “TX” key 6.
PAGE 2
1. Input Sensor ID 2. Switch DEC/HEX by pressing “FUN” 3. Switch DEC/HEX by same press Switch DEC/HEX Procedure: 1. ID Programmer shows decimal while inputting sensor ID (Figure 1). 2. Switch to Hexadecimal by pressing “FUN” (Figure 2). 3. Decimal comes back by pressing “FUN” (Figure 3).