DLP® Projector User manual
TABLE OF CONTENTS SAFETY................................................................................................ 4 Important Safety Instruction....................................................................................................... 4 3D Safety Information................................................................................................................. 5 Copyright.............................................................................................................
Setup power settings menu....................................................................................................... 36 Setup security menu.................................................................................................................. 37 Setup HDMI link settings menu................................................................................................. 38 Setup test pattern menu..........................................................................................
SAFETY The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Please do not open or disassemble the projector as this may cause electric shock. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair. See projector enclosure for safety related markings. The unit should only be repaired by appropriate service personnel. Only use attachments/accessories specified by the manufacturer.
If you experience any of the following symptoms, stop viewing 3D pictures immediately and consult a medical specialist: (1) altered vision; (2) light-headedness; (3) dizziness; (4) involuntary movements such as eye or muscle twitching; (5) confusion; (6) nausea; (7) loss of awareness; (8) convulsions; (9) cramps; and/ or (10) disorientation. Children and teenagers may be more likely than adults to experience these symptoms.
FCC This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
INTRODUCTION Package Overview Carefully unpack and verify that you have the items listed below under standard accessories. Some of the items under optional accessories may not be available depending on the model, specification and your region of purchase. Please check with your place of purchase. Some accessories may vary from region to region. The warranty card is only supplied in some specific regions. Please consult your dealer for detailed information.
INTRODUCTION Product Overview 1 2 3 5 4 7 8 6 9 12 11 10 5 Note: Keep a minimum distance of 20 cm between the “inlet” and “outlet” labels. No Item No Item 1. Lens 7. Focus Lever 2. IR Receiver 8. Lamp Cover 3. Keypad 9. Ventilation (outlet) 4. Lens Cap 10. KensingtonTM Lock Port 5. Tilt-Adjustment Foot 11. Power Socket 6. Ventilation (inlet) 12.
INTRODUCTION Connections 1 HDMI v2.0 HDCP v2.2 4K 60HZ compatible COMPATIBLE 2 3 Note: 10 English 5 6 HDMI 2 MHL v1.4 HDCP v2.2 4K 30HZ compatible VGA IN AUDIO OUT VGA OUT 7 AUDIO IN USB POWER OUT (5V 1.5A) Full 3D RS232 10 No 4 9 Item 8 No Item 1. HDMI Connector * 6. AUDIO OUT Connector 2. HDMI 2 / MHL Connector ** 7. AUDIO IN Connector 3. USB Power Out (5V 1.5A) Connector / MOUSE / SERVICE Connector 8. RS232 Connector 4. VGA IN Connector 9.
INTRODUCTION Keypad 1 2 3 9 12 4 11 5 6 10 No Item 9 8 7 No Item 1. On/Standby LED 7. IR Receiver 2. Lamp LED 8. Enter 3. Temp LED 9. Keystone Correction 4. Information 10. Menu 5. Re-Sync 11. Source 6.
INTRODUCTION Remote control 1 1 ON OFF 2 3 4 5 6 User1 Brightness Keystone Contrast 15 User3 Mode 3D Sleep Timer Mute 18 19 20 Volume Source 16 17 Aspect ratio DB 7 8 User2 14 Re-sync 21 22 9 10 11 12 23 Menu Volume HDMI1 HDMI2 VGA1 VGA2 Video YPbPr 13 No Item 24 25 26 27 No Item 1. Power On 15. User 3 2. User 2 16. Contrast 3. User 1 17. Display Mode 4. Brightness 18. Aspect Ratio 5. Keystone 19. 3D Menu On / Off 6. Mute 20. Sleep Timer 7.
INTRODUCTION Remote control 2 1 Power Switch 16 2 Freeze 3 4 17 L R 18 5 19 Enter 6 7 8 9 10 Laser Page- Keystone - - + 1 Page+ Volume + 2 3 Menu 3D 11 4 5 6 HDMI VGA Video 12 7 8 9 User1 User2 User3 13 14 21 22 23 24 25 26 0 Source 20 Resync 27 15 No Item No Item 1. Power On / Off 15. Brightness Mode 2. Freeze 16. Mouse On / Off 3. Display Blank / Audio Mute 17. Mute 4. Mouse Left Click 18. Mouse Right Click 5. Enter 19.
SETUP AND INSTALLATION Installing the projector Your projector is designed to be installed in one of four possible positions. Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment.
SETUP AND INSTALLATION Projector installation notice Place the projector in a horizontal position. The tilt angle of the projector should not exceed 15 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically, and may lead to other unpredictable damages. 15° -15° Allow at least 30 cm clearance around the exhaust vent. Minimum 100mm (3.94 inches) Minimum 300mm (11.81 inches) Minimum 300mm (11.
SETUP AND INSTALLATION Connecting sources to the projector 2 4 3 5 1 HDMI HDMI 2 MHL v2.0 HDCP v2.2 4K 60HZ compatible COMPATIBLE v1.4 HDCP v2.2 4K 30HZ compatible VGA IN AUDIO OUT VGA OUT AUDIO IN USB POWER OUT (5 5V V 1 1.5 .5 5A) Full 3D 11 RS232 MOLEX 10 9 8 7 6 12 MOLEX No 16 English Item No Item 1. HDMI Cable 7. VGA Out Cable 2. HDMI / MHL Cable 8. RS232 Cable 3. VGA In Cable 9. USB Cable 4. RCA Component Cable 10. USB Power Cable 5. Audio In Cable 11.
SETUP AND INSTALLATION Adjusting the projector image Image height The projector is equipped with elevator feet for adjusting the image height. 1. 2. Locate the adjustable foot you wish to adjust on the underside of the projector. Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector. Tilt-Adjustment Feet Tilt-Adjustment Ring Focus To adjust the focus, turn the focus lever clockwise or counterclockwise until the image is sharp and legible.
SETUP AND INSTALLATION Installing / replacing the batteries Two AAA size batteries are supplied for the remote control. 1. 2. 3. Remove the battery cover on the back of the remote control. Insert AAA batteries in the battery compartment as illustrated. Replace back cover on remote control. Note: Replace only with the same or equivalent type batteries. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
SETUP AND INSTALLATION Effective range Infra-Red (IR) remote control sensor is located on top of the projector. Ensure to hold the remote control at an angle within 30 degrees perpendicular to the projector’s top IR remote control sensor to function correctly. The distance between the remote control and the sensor should not be longer than 6 meters (~ 20 feet).
USING THE PROJECTOR Powering on / off the projector or ON User1 Brightness Keystone OFF User2 Contrast Aspect ratio 3D DB Sleep Timer Mute ON OFF Volume User1 Brightness Source User3 Mode Keystone User2 Contrast User3 Mode Re-sync Aspect ratio 3D DB Sleep Timer Mute Volume Source Re-sync Menu Menu Volume HDMI1 HDMI2 Volume VGA1 VGA2 Video YPbPr HDMI1 HDMI2 Powering on VGA1 connected, VGA2 Video YPbPr 1. Securely connect the power lead and signal/source cable.
ON USING THE PROJECTOR User1 Brightness Selecting an input source Keystone OFF User2 Contrast User3 Mode Aspect ratio Turn on the connected source that you want to display on the screen, such as computer, notebook, video player, 3D etc. The projector will automatically detect the source. If multiple sources are DB connected, push the source button on Sleep Timer Mute the projector keypad or the remote control to select the desired input.
USING THE PROJECTOR Menu navigation and features The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. 1. To open the OSD menu, press 2. When OSD is displayed, use on a particular page, press 3. Use keys to select the desired item in the sub menu and then press settings. Adjust the settings by using keys. 4.
USING THE PROJECTOR OSD Menu tree Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Cinema Film HDR HDR SIM. Vivid Game Reference Display Mode Bright User 3D ISF Day ISF Night ISF 3D Off [Default] Blackboard Light Yellow Light Green Wall Color Light Blue Pink Gray Display Image Settings HDR Dynamic Range Off Auto [Default] Bright HDR Picture Mode Standard [Default] Film Detail Brightness -50~50 Contrast -50~50 Sharpness 1~15 Film Video Graphics Gamma Standard(2.2) 1.8 2.0 2.
USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values R [Default] G B Color C Y M W Color Matching Hue -50~50 [Default: 0] Saturation -50~50 [Default: 0] Gain -50~50 [Default: 0] Reset Cancel [Default] Yes Exit Color Settings RGB Gain/Bias Display Red Gain -50~50 Green Gain -50~50 Blue Gain -50~50 Red Bias -50~50 Green Bias -50~50 Blue Bias -50~50 Reset Image Settings Cancel [Default] Yes Exit Color Space [Not HDMI Input] Auto [Default] RGB YUV Aut
USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Bright Image Settings Eco. Brightness Mode Dynamic Eco+ Reset Off 3D Mode On [Default] DLP-Link [Default] 3D Tech.
USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Front [Default] Rear Projection Ceiling-top Rear-top Off Lamp Reminder On [Default] Lamp Settings Cancel [Default] Lamp Reset Yes Filter Usage Hours (Read only) Yes Optional Filter Installed No Off 300hr Filter Settings Filter Reminder 500hr [Default] 800hr 1000hr Cancel [Default] Filter Reset Yes Off [Default] Direct Power On Setup On Off [Default] Signal Power On On 0~180 (5 min increments) [Default:
USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 HDMI Link Inclusive of TV HDMI Link Settings Sub Menu 3 Sub Menu 4 Values Off On No Yes Mutual Power On Link PJ --> Device Device --> PJ Power Off Link Off On Green Grid Magenta Grid Test Pattern White Grid White Off IR Function On Off HDMI 2 Test Pattern Brightness Contrast Sleep Timer Setup Color Matching User1 Color Temp Gamma Projection Lamp Settings Remote Settings Zoom [depends on remote] MHL Freeze HDMI 2 Test Pattern Brightness C
USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values HDMI 2 Test Pattern Brightness Contrast Sleep Timer Remote Settings [depends on remote] Color Matching User3 Color Temp Gamma Projection Lamp Settings Zoom Freeze MHL Projector ID 00~99 English [Default] Deutsch Français Italiano Español Português Setup Polski Nederlands Svenska Norsk/Dansk Suomi ελληνικά 繁體中文 Options Language 简体中文 日本語 한국어 Русский Magyar Čeština ไทย Türkçe Tiếng Việt Bahasa Indonesia Română Slovenči
USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Top left Top right Menu Location Menu Settings Center [Default] Bottom left Bottom right Off Menu Timer 5sec 10sec [Default] Off [Default] Auto Source On HDMI1 Input Source HDMI2/MHL VGA HDMI1 Input Name HDMI2/MHL Options VGA Setup High Altitude Display Mode Lock Keypad Lock Information Hide Default [Default] Custom Default [Default] Custom Default [Default] Custom Off [Default] On Off [Default] On Off [Default]
USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values Regulatory Serial Number Source Resolution 00x00 Refresh Rate xxHz Display Mode Power Mode (Standby) Info Lamp Hours Bright 0 hr Eco 0 hr Dynamic 0 hr Eco+ 0 hr Total Brightness Mode FW Version 30 English System MCU
USING THE PROJECTOR Display menu Display image settings menu Display Mode There are many factory presets optimized for various types of images. Cinema: Provides the best colors for watching movies. Film: Select to display the purest color settings for home theatre. HDR: Decodes and displays High Dynamic Range (HDR) content for the deepest blacks, brightest whites, and vivid cinematic color using REC.2020 color gamut.
USING THE PROJECTOR HDR Picture Mode Bright: Choose this mode for brighter more saturated colors. Standard: Choose this mode for natural looking colors with a balance of warm and cool tones. Film: Choose this mode for improved detail and image sharpness. Detail: The signal comes from OETF conversion to achieve the best color matching. Brightness Adjust the brightness of the image. Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture.
USING THE PROJECTOR Signal Adjust the signal options. Automatic: Configure automatically the signal (the frequency and phase items are grayed out). If automatic is disabled, the frequency and phase items will appear for tuning and saving the settings. Frequency: Change the display data frequency to match the frequency of your computer’s graphic card. Use this function only if the image appears to flicker vertically. Phase: Synchronize the signal timing of the display with the graphic card.
USING THE PROJECTOR 3D → 2D Use this option to specify how the 3D content should appear on the screen. 3D: Display 3D signal. L (Left): Display the left frame of 3D content. R (Right): Display the right frame of 3D content. Note: When changing the input source from 3D to 2D, make sure the 3D Mode setting is set to Off. Otherwise, 2D input source will appear distorted (dual image). 3D Format Use this option to select the appropriate 3D format content.
USING THE PROJECTOR Display edge mask menu Edge Mask Use this function to remove the video encoding noise on the edge of video source. Display zoom menu Zoom Use to reduce or magnify an image on the projection screen. Display image shift menu Image Shift Adjust the projected image position horizontally (H) or vertically (V). Display keystone menu Keystone Adjust the image distortion caused by tilting the projector. Audio menu Audio mute menu Mute Use this option to temporarily turn off the sound.
USING THE PROJECTOR Setup menu Setup projection menu Projection Select the preferred projection between front, rear, ceiling-top, and rear-top. Setup lamp settings menu Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Lamp Reset Resets the lamp hour counter after replacing the lamp. Setup filter settings menu Filter Usage Hours Display the filter time.
USING THE PROJECTOR Sleep Timer (min.) Configure the sleep timer. Sleep Timer (min.): Sets the countdown timer interval. The countdown timer will start, with or without a signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Note: The Sleep Timer is reset every time when the projector is powered off. Always On: Check to set the sleep timer always on. Quick Resume Set the quick resume setting.
USING THE PROJECTOR Setup HDMI link settings menu Note: When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them on the same power on or power off status using the HDMI Link control feature in the projector’s OSD. This lets one device or multiple devices in a group power on or power off via HDMI Link Feature in a typical configuration, your DVD player may be connected to the projector through an amplifier or home theater system.
USING THE PROJECTOR Setup projector ID menu Projector ID ID definition can be set up by menu (range 0-99), and allow user control an individual projector by using RS232 command.
USING THE PROJECTOR Setup reset menu Reset OSD Return the factory default settings for OSD menu settings. Reset to Default Return the factory default settings for Setup menu settings.
MAINTENANCE Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, a warning message will appear on the screen. Warning Lamp Warning Lamp life exceeded. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp.
MAINTENANCE Replacing the lamp (continued) 2 4 3 5 6 1 Procedure: 1. Switch off the power to the projector by pressing the " " button on the remote control or the projector keypad. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the screw on the cover. 1 5. Remove the cover. 2 6. Unscrew the screw on the lamp module. 3 7. Lift up the lamp handle. 4 8. Remove the lamp cord. 5 9. Remove the lamp module carefully. 6 10.
MAINTENANCE Installing and cleaning the dust filter Installing the dust filter Note: Dust filters are only required/supplied in the selected regions with excessive dust. Cleaning the dust filter We recommend you to clean the dust filter every three months. Clean it more often if the projector is used in a dusty environment. Procedure: 1. Switch off the power to the projector by pressing the " " button on the remote control or the projector keypad. 2. Disconnect the power cord. 3.
ADDITIONAL INFORMATION Compatible resolutions HDMI1.
ADDITIONAL INFORMATION B0/Established Timing B0/Standard Timing B0/Detail Timing B1/Video Mode B1/Detail Timing 1440 x 480p @ 60Hz 2880 x 576i @ 50Hz 1440 x 576p @ 50Hz 1440 x 576i @ 50Hz 3840 x 2160p @ 24Hz 3840 x 2160p @ 25Hz 3840 x 2160p @ 30Hz 3840 x 2160p @ 50Hz 3840 x 2160p @ 60Hz 4096 x 2160p @ 24Hz 4096 x 2160p @ 25Hz 4096 x 2160p @ 30Hz 4096 x 2160p @ 50Hz 4096 x 2160p @ 60Hz True 3D video compatibility Input timing HDMI 1.
ADDITIONAL INFORMATION Image size and projection distance Diagonal Length Size of (16:9) Screen Screen Size (W x H) Width Projection Distance ( D ) Height Wide Offset (Hd) Tele (m) (inch) (m) (inch) (m) (inch) (m) (feet) (m) (feet) (m) (inch) 0.9398 37 0.82 32.25 0.46 18.1 0.41 1.35 0.41 1.35 0.07 2.76 1.016 40 0.89 34.86 0.5 19.6 0.44 1.44 0.44 1.44 0.08 3.15 1.27 50 1.11 43.58 0.62 24.5 0.55 1.80 0.55 1.80 0.10 3.94 1.524 60 1.33 52.29 0.75 29.
ADDITIONAL INFORMATION Projector dimensions and ceiling mount installation 1. 2. To prevent damage to your projector, please use the Optoma ceiling mount. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: Screw type: M4*3 Minimum screw length: 10mm Lens Unit: mm Note: Please note that damage resulting from incorrect installation will void the warranty.
ADDITIONAL INFORMATION IR remote control 1 codes ON OFF User2 User1 Brightness Keystone User3 Contrast Mode Aspect ratio 3D DB Sleep Timer Mute Volume Source Re-sync Menu Volume HDMI1 HDMI2 VGA1 VGA2 Video YPbPr Key Custom code Data code Printing-key definition Description Byte 1 Byte 2 Byte 3 Power on 32 CD 02 ON Press to turn on the projector. Power off 32 CD 2E OFF Press to turn off the projector.
ADDITIONAL INFORMATION Key Custom code Data code Printing-key definition Description Byte 1 Byte 2 Byte 3 32 CD 09 Volume + 32 CD 11 ▲ 32 CD 10 ◄ 32 CD 12 ► 32 CD 14 ▼ Source 32 CD 18 Source Enter key 32 CD 0F Re-sync 32 CD 04 Re-sync Automatically synchronizes the projector to the input source. Volume - 32 CD 0C Volume - Adjust to decrease volume. Menu 32 CD 0E Menu Display or exit the on-screen display menus for projector.
ADDITIONAL INFORMATION IR remote control 2 codes Power Switch Freeze L R Enter Laser Page- Keystone - - + 1 Page+ Volume + 2 3 Menu 3D 4 5 6 HDMI VGA Video 7 8 9 User1 User2 User3 0 Source Key code Printing-key definition Power 81 Power on/off Switch 3E Switch Display blank / audio mute 8A Freeze 8B Mute 92 Key Resync Description Press to turn on / off the projector. Press to switch the USB mouse on / off.
ADDITIONAL INFORMATION Key code Printing-key definition Laser N/A Laser Use as laser pointer. Page + C1 Page+ Press to page up. 85 Keystone+ 84 Keystone- 8C Volume + 8F Volume - Key Keystone - + Volume - + Aspect ratio / 1 Menu / 2 3D / 3 98 88 93 /1 Description Press to adjust image distortion caused by tilting the projector. Press to adjust to increase / decrease the volume. Press to change aspect ratio of a displayed image. Use as numeric keypad number "1".
ADDITIONAL INFORMATION Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems No image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the "Installation" section. Ensure the pins of connectors are not crooked or broken. Check if the projection lamp has been securely installed.
ADDITIONAL INFORMATION Blurry double image Press "3D" button and switch to "Auto" to avoid normal 2D image is blurry double image. Two images, side-by-side format Press "3D" button and switch to "Side by Side" for input signal is HDMI 1.3 2D 1080i side-by-side. Image does not display in 3D Check if the battery of 3D glasses is drained. Check if the 3D glasses is turned on. When the input signal is HDMI 1.
ADDITIONAL INFORMATION Warning indicators When the warning indicators (see below) light up or flash, the projector will automatically shutdown: "LAMP" LED indicator is lit red and if "On/Standby" indicator flashes red. "TEMP" LED indicator is lit red and if "On/Standby" indicator flashes red. This indicates the projector has overheated. Under normal conditions, the project can be switched back on. "TEMP" LED indicator flashes red and if "On/Standby" indicator flashes red.
ADDITIONAL INFORMATION Temperature warning: Warning TEMPERATURE TOO HIGH Please: 1. Make sure air in and outlets are not blocked. 2. Make sure the environment temperature is under 45 degree C. If the problem persists in spite of the above. Please contact a service center for repair. Fan failed: Warning FAN LOCKED The projector will switch off automatically Please contact a service center for repair.
ADDITIONAL INFORMATION Specifications Optical Description Native resolution 1080p Maximum resolution 3840 x 2160 (60Hz) Lens Manual focus Image size (diagonal) 36.2”~316.8” with optimized @ 89.1” Projection distance 1m ~ 10m with optimized @ 1.493m Electrical Description Inputs - HDMI v2.0 - HDMI/MHL v1.4 - USB2.0 USB-A for 5V PWR 1.5A - VGA IN - Audio In 3.5mm - RS232C male (9-pin D-SUB) Outputs - Audio Out 3.5mm - VGA Out Control USB type A for mouse / service Color reproduction 1073.
ADDITIONAL INFORMATION Optoma global offices For service or support, please contact your local office. USA 47697 Westinghouse Drive, Fremont, CA 94539, USA www.optomausa.com Canada 47697 Westinghouse Drive, Fremont, CA 94539, USA www.optomausa.com Latin America 47697 Westinghouse Drive, Fremont, CA 94539, USA www.optomausa.com Europe Unit 1, Network 41, Bourne End Mills Hemel Hempstead, Herts, HP1 2UJ, United Kingdom www.optoma.
*36.7FN01G001-A* P/N:36.7FN01G001-A www.optoma.
