Handheld Bluetooth 1D CCD Scanner OPN-4200i This manual provides specifications for the OPN4200i handheld Bluetooth 1D CCD scanner.
OPN-4200i Specifications Manual All information subject to change without notice. Document History Model Number: OPN-4200i Specification Number: SS14023 Edition: 1st Original Spec Number: SS14018 Date: 2014-10-15 Copyright 2014 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.
OPN-4200i Specifications Manual Revision History Specification No.
OPN-4200i Specifications Manual Contents 1. Abstract ............................................................................................................................................. 1 2. Overview............................................................................................................................................ 1 3. Basic Specifications......................................................................................................................... 2 4.
OPN-4200i Specifications Manual 10.3. EMC ...................................................................................................................................... 15 10.4. Others ................................................................................................................................... 16 11. RoHS .............................................................................................................................................. 16 12. Reliability.............
OPN-4200i Specifications Manual 1. Abstract This manual provides specifications for the OPN-4200i handheld Bluetooth 1D CCD scanner. 2. Overview The OPN-4200i is a handheld 1D scanner with a built-in CCD imager that enables high speed scanning of standard linear (1D) symbologies. The scanned data is output via Bluetooth. ・ All bar code data scanned is transmitted to a host device through the Bluetooth interface.
OPN-4200i Specifications Manual 3. Basic Specifications Item Specification Control Section Input Section Indicator CPU 32 bit CISC / 96 MHz FROM 512 Kbyte + 32 Kbyte SRAM 96 Kbyte FROM (storage) 1 Mbyte Key type 1 key: trigger LED 2 colors (red, green) and 1 color (blue) Buzzer Loudness (3-level) / tone adjustable Vibration motor Strength (3-level) / duration adjustable Interface Bluetooth Note For data area only Frequency 2402 ~ 2480 MHz Specification Bluetooth Ver 2.
OPN-4200i Specifications Manual Item Specification On LCD screen Note 2 Brightness of white space 30 cd/m or more Contrast ratio 100:1 or more Power Section Main battery Lithium-ion 1100 mAh (typ.) Charge the battery before initial use Up-time 48 hours or more *1 Operating (charging) voltage 5.0 ~ 6.
OPN-4200i Specifications Manual 4. Detailed View 3 4 2 1 5 Figure 1: Detailed View of OPN-4200i No Name Description 1 Trigger Key A key to read bar codes 2 Scan Window LED illumination is emitted from this window to read bar codes. 3 Status LED The operating statuses, such as bar code reading, Bluetooth connection and warning, are indicated by different colors. 4 Buzzer Holes A sound from a built-in buzzer comes out through these holes.
OPN-4200i Specifications Manual 5. Electrical Specifications 5.1. Current Consumption Standby Sleep Item Specification 15 mA or less 1 mA or less Operating 200 mA or less Measurement condition Power voltage 3.7 V at 25 °C Note With wireless connection Reading, communications, LED, vibration motor activated 5.2. Operating Time and Charging Time Item Sleep Battery Standby duration Reading Charging time Specification 200 hours or more Approx. 72 hours Approx. 48 hours Approx.
OPN-4200i Specifications Manual 7. Optical Specifications 7.1. Basic Optical Specifications Item Characteristics Scan method CCD linear image sensor - Effective pixel Horizontal 1500 dots Image capture speed (*1) Scan rate 300 scans/sec Focal distance Distance from the front edge of scanner 105 mm View angle Horizontal Approx.
OPN-4200i Specifications Manual 8. Technical Specifications The conditions for technical specifications are as follows unless otherwise specified in each section. Temperature and humidity Ambient light Angles Curvature Power supply voltage Reading test Bar code test sample : Room temperature, room humidity : 200 ~ 300 lx : Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0° :R=∞ : 3.7 V : 1 read in 0.5 sec or less. Accept the performance with 10 consecutive successes : OPTOELECTRONICS test samples.
OPN-4200i Specifications Manual 8.2. Scan Area and Depth of Field The scan area is within the arc centered on the scan origin as shown in each resolution, which is measured from the front edge of the scanner. 60 50 150 100 200 250 300 350 400 450 500 550 Scanning may not be possible within this range Resolution 0.127 55 45 75 Resolution 0.15 100 Resolution 0.25 35 175 Resolution 0.5 40 60 300 Resolution 1.
OPN-4200i Specifications Manual 8.3. Printed Contrast Signal (PCS) 0.3 or higher MRD Distance Bar code : 32% and higher (70% or higher reflectivity of space and quiet zone) : 72 mm from the front edge of the scanner : JAN (resolution 0.26 mm, PCS 0.3) specified in Section 8.1.
OPN-4200i Specifications Manual 8.6. Pitch, Skew and Tilt Pitch Skew Dead zone Tilt Bar code Distance Curvature Angle : α = ±50° : β = ±65° : β = ±8° : γ = ±25° : JAN (resolution 0.33 mm) specified in Chapter 8.1 : 72 mm from the front edge of the scanner :R=∞ : Pitch β = +15°, γ = 0° Skew, Dead zone α = 0°, γ = 0° Tilt α = 0°, β = +15° α - β + + γ - + Figure 5: Pitch, Skew and Tilt 8.7. Curvature 0.26 mm 8-digit JAN 0.
OPN-4200i Specifications Manual 8.8. Scanning from LCD Screen Bar codes displayed on LCD screens (brightness of white part 30 cd/m2 or more, contrast ratio 100:1) can be read. Bar code Ambient light Distance Angle LCD screen type Contrast ratio = : JAN (resolution 0.26 mm) specified in Section 8.1.
OPN-4200i Specifications Manual 8.9.2. Auto Trigger Operation The scanner has an optional auto trigger mode in which it starts to read a bar code automatically when it detects one. When auto trigger mode is enabled, the scanner tries to detect bars at regular intervals and when it detects 18 or more bars, it enters read mode in which it tries to decode a bar code.
OPN-4200i Specifications Manual 9. Environmental Specifications 9.1. Temperature Scanning performance is guaranteed when the range of ambient temperature around the scanner is the following values: Operating temperature Storage temperature : 0 ~ 50 °C : -20 ~ 60°C 9.2.
OPN-4200i Specifications Manual 9.6. Vibration Strength (in individual packing) There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes per cycle) in individually packaged state. Repeat this in each X, Y and Z direction. 9.7. Drop Impact Strength (without packaging) There shall be no sign of malfunction after the following drop test.
OPN-4200i Specifications Manual 10. Regulatory Compliance 10.1. LED Safety IIEC 62471-1:2006 Exempt_Group 10.2. Product Safety EN60950-1:2005 IEC60950-1:2006 10.3. EMC R&TTE Directive ・EN 55022:2010 ・EN 301 489-1 V1.9.2 ・EN 301 489-17 V2.1.1 ・EN 300 328 V1.8.1 FCC Part 15 Subpart B Class B Federal Communications Commission Notices This product complies with Part 15 of the FCC Rules.
OPN-4200i Specifications Manual 10.4. Others ・Bluetooth logo certification ・MFi license “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards.Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
OPN-4200i Specifications Manual (4) Others ・Do not disassemble this product. ・Do not use this product near a radio or a TV. It may cause reception problems. ・This product may be affected by a momentary voltage drop caused by lightning. ・iPhone, iPad and iPod are trademarks of Apple Inc. ・Other company and product names may be trademarks of their respective owners. 13.2. Radio Law This product qualifies as specified radio equipment for radio stations of 2.
OPN-4200i Specifications Manual 14. Product Labels The product labels are affixed to the scanner as shown below. Product label Logo label Figure 10: Product Labels Product label Shows the product name, serial number, and month and year of manufacture. Logo label Shows the standards-compliant languages and logos.
OPN-4200i Specifications Manual 15. Packaging Specifications 15.1.
OPN-4200i Specifications Manual 15.2. Collective Packaging Assembled package size : 585 × 520 × 200 (WDH mm) Figure 12: Collective Packaging * ‘Ro mark’ on the boxes for the product indicates that the product is RoHS compliant declared by Optoelectronics Co., Ltd.
OPN-4200i Specifications Manual 16. Physical Features 16.1. Dimensions 56 × 113 × 132 (WDH mm / excluding protruding portion) 16.2. Weight Approx. 127 g (excluding accessories) 16.3.
OPN-4200i Specifications Manual 17. Supported Symbologies 17.1. Default Setting The scanner is set to default settings by reading the following menu labels. Function SET Default END Menu label Menu code _ZZ_ _SO_ _ZZ_ ZZ SO ZZ 17.2. Supported Symbologies 17.2.1.
OPN-4200i Specifications Manual 17.2.2. GS1 Databar, Composite Code Code type GS1 DataBar ・GS1 DataBar Omnidirectional ・GS1 DataBar Truncated ・GS1 DataBar Stacked ・GS1 DataBar Stacked Omnidirectional GS1 DataBar Limited GS1 DataBar Expanded ・GS1 DataBar Expanded ・GS1 DataBar Expanded Stacked Default Note ○ GS1 conversion (setting required) ○ ○ * The supported symbologies vary depending on specifications for the application to be loaded.
