SPECIFIICATIONS MANUAL M OPN OP N-331002i OPN-3102i O 1st Data D Colle ector with h Bluetootth This manual prov vides speciifications fo or the OPN N-3102i Bluuetooth data a collector with 2D im mager scan nner.
SPECIFICATIONS MANUAL OPN-3102i 1st The information in this document is subject to change without notice. Document History Model Number: Edition: Date: OPN-3102i 1st 30-September-2016 Specification Number: Original Spec Number: SS16057 (SS15053) 2016 Copyright Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.
SPECIFICATIONS MANUAL OPN-3102i 1st Revision History Product Name : OPN-3102i Edition st 1 Date 2016/09/30 Page - Section Description of Changes - 3
SPECIFICATIONS MANUAL OPN-3102i 1st Contents 1 Abstract............................................................................................................................ 6 2 Overview .......................................................................................................................... 6 3 Basic Specifications ....................................................................................................... 7 4 Detailed View ........................................
SPECIFICATIONS MANUAL 10.4 OPN-3102i 1st Other....................................................................................................................................... 25 11 RoHS .............................................................................................................................. 25 12 Reliability ....................................................................................................................... 25 13 Precautions.................................
SPECIFICATIONS MANUAL OPN-3102i 1st 1 Abstract This manual provides specifications for the OPN-3102i compact 2D data collector with built-in Bluetooth. 2 Overview The OPN-3102i is 2D imager scanner built-in and output scanned barcode data using the Bluetooth interface. ・OPN-3102i is handy and simple data collector. ・All barcode data scanned is transmitted to a host device through the USB interface or Bluetooth.
SPECIFICATIONS MANUAL OPN-3102i 1st 3 Basic Specifications Item Specification Control Section Input Section Indicator RTC CPU 32 bit CISC / 96 MHz FROM 512 Kbyte + 32 Kbyte SRAM 96 Kbyte FROM (storage) 1 Mbyte Key type 2 key: trigger, function LED 2 bi-colors LEDs (red, green) and 1 blue LED Buzzer Loudness (3-level) / tone adjustable Vibration motor Strength (3-level) / duration adjustable Contents Year, month, date, hour, minute, second Accuracy ± 90 seconds per month Interface
SPECIFICATIONS MANUAL Item Specification Motion Tolerance 90 ~ 110 Resolution (0.254) 65 ~ 185 Resolution (0.508) 65 ~ 260 Code 128 Resolution (0.2) 85 ~ 165 UPC Resolution (0.33) 55 ~ 195 Depth of Field GS1/Composite Symbologies Minimum resolution Symbologies Supported 2D Symbologies Minimum resolution (mm) PDF417 QR Code DataMatrix Note UPC 100% moving at 2m/sec (DOF 100 mm) is readable: Resolution (0.
SPECIFICATIONS MANUAL Item Specification OPN-3102i 1st Note 10 Hz ~ 100 Hz, acceleration of 19.6 m/s2, 60 minutes per cycle, repeat once in each X, Y and Zdirection Drop the scanner 18 times (6 faces x 3) from a height of 150 cm onto a concrete floor Vibration Drop Dust and drip proof IP54 equivalent LED safety IEC 62471:2006 Exempt_Group EN60950-1:2005 IEC60950-1:2006 EN 55024:2010 EN 55032:2012+AC :2013 EN 301 489-1 V1.9.2 EN 301 489-17 V2.1.1 EN 300 328 V1.9.1 EN 302 291-2 V1.1.
SPECIFICATIONS MANUAL OPN-3102i 1st 4 Detailed View 1 3 5 8 9 4 6 2 7 Figure 1: Detailed View No Name Description 1 Scan Window LED illumination is emitted from this window to read barcodes. 2 USB Cap Cap for USB connector part used to make the scanner IP54 water tight. 3 Trigger Key Press this key to enable the laser and start reading barcodes. 4 Function Key The function of this key depends on the installed application.
SPECIFIICATIONS MANUAL M OPN-3102i O 1st 5 Ele ectrical Specifica S ations 5.1 U USB Su upply Voltage Bu us-power (Cllass) Cu urrent consu umption 5.2 : 4.5-5.5V V : 500mA m max (Hi-Pow wer) : Less tha an 500mA W Wireless Charging Fe eeding system Po ower consum mption : Electrom magnetic indu uction : Less tha an 5W 6 Intterface Specifica S ations The OPN N-3102i supp ports two typ pes of interfacces; USB an nd Bluetooth. 6.1 U USB Interfa ace Interface is Fu ull Speed USB interface. 6.1.
SPECIFICATIONS MANUAL 6.2 OPN-3102i 1st Bluetooth The specifications of the OPN-3102i Bluetooth interface are as follows: Frequency : 2402 ~ 2480 MHz 6.3 Specification : Bluetooth Ver 2.
SPECIFICATIONS MANUAL OPN-3102i 1st 7 Optical Specifications 7.1 Basic Specifications Item Characteristics Scan method CMOS area sensor (white / black) - Number of effective pixel (Column) × (Row) 640 × 480 dots Image capture speed (*1) Frame rate 100 fps Focal distance Distance from the front edge of scanner 109.2 mm Horizontal Approx. 38.0° Vertical Approx. 28.9° Diagonal Approx. 46.
SPECIFIICATIONS MANUAL M 7.2 OPN-3102i O 1st A Aiming Patttern T The aiming iss used for the following p purpose: 1 1. Fill light to o recognize th he appropria ate reading ra ange. 2 2. Fill light when auto trig gger is used. T The aiming specifications s s are as follo ows: - The horizon ntal width of the imaging field of view and the horizontal aiminng width are equal at a distance of L=144.2±4 40 mm from the front edg ge of the sca anner.
SPECIFICATIONS MANUAL OPN-3102i 1st 8 Technical Specifications Aim the laser light at the center of a code to scan it. The conditions for technical specifications are as follows, unless otherwise specified in each section. Ambient Temperature and Humidity Ambient Light Angles Curvature Power Supply Voltage PCS (1D and 2D) Scanning Test Barcode Test Sample (1D and 2D) Room temperature, room humidity 100 ~200 lux (on the surface of a barcode) Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0° R=∞ 5.
SPECIFICATIONS MANUAL 8.1 OPN-3102i 1st Barcode Test Sample 1D Barcodes Resolution 0.1 mm (3.9 mil) 0.127 mm (5 mil) 0.20 mm (7.9 mil) 0.254 mm (10 mil) 0.508 mm (20 mil) Symbology PCS Code 39 0.9 Resolution 0.20 mm (7.9 mil) Symbology Code 128 Resolution 0.330 mm (13 mil) Resolution 0.150 mm (6 mil) Size (mm) 8.5 × 10 32 × 10 100 × 10 32.5 × 12 36 × 25 No. of Digits 4 15 31 7 4 PCS 0.9 Size (mm) 42 × 10 No. of Digits 16 Symbology PCS Size (mm) No.
SPECIFICATIONS MANUAL 8.2 OPN-3102i 1st Scan Area and Depth of Field The scanner is able to read in the area between the two arcs that are centered on the scan origin with a center line distance from the front of the scanner as indicated for each resolution. Symbology Code 39 Code 128 UPC PDF417 QR Code Data Matrix Barcode Sample Angle Resolution 0.127mm 0.254mm 0.508mm 0.20mm 0.33mm 0.169mm 0.254mm 0.169mm 0.381mm 0.212mm 0.
SPECIFICATIONS MANUAL 0" 2" 4" 6" 8" 50 100 150 200 OPN-3102i 1st 10" 12" 14" 16" 17" [ inch ] 350 400 450 5" 300 150 250 5" 125 0.20mm ( 7.9mil ) 100% EAN/UPC 0.33mm( 13mil ) 0.169mm( 10mil ) PDF417 0.254mm( 10mil ) 0.169mm( 6.7mil ) QR Code 0.381mm( 15mil ) 0.212mm( 8.4mil ) Data Matrix 0.254mm( 10mil ) Figure 6: Scan Area and Depth of Field 18 [ inch ] 0.508mm ( 20mil ) [ mm ] Code 39 6" 150 0.254mm ( 10mil ) Code 128 4" 100 0.
SPECIFICATIONS MANUAL 8.3 OPN-3102i 1st Printed Contrast Signal (PCS) 0.2 or higher MRD : 10% and higher (70% or higher reflectivity of space and quiet zone) Distance : 125mm from the front edge of the scanner Barcode Sample : UPC specified in Chapter 8. (Resolution: 0.33 mm, PCS: 0.
SPECIFICATIONS MANUAL 8.6 OPN-3102i 1st Pitch, Skew and Tilt Pitch Skew Tilt : α = ±70° : β = ±70° : γ = ±360° Barcode Sample : 0.33 mm UPC specified in Chapter 8.1 Distance : 125 mm from the front edge of the scanner Curvature :R=∞ * For the pitch angle and tilt angle measurement, set the skew angle β = +15° - β + + γ - + Figure 8: Pitch, Skew and Tilt 8.7 Curvature 0.33 mm 12-digit UPC: 0.
SPECIFICATIONS MANUAL 8.8 OPN-3102i 1st Scanning from LCD Screen Barcodes displayed on LCD screens (brightness of white part 30 cd/m2 or more, contrast ratio 100:1 or more) can be read. Barcode Ambient light Distance Angle LCD screen type Illumination mode Contrast ratio = : UPC, resolution 0.33 mm specified in Chapter 8.1.
SPECIFICATIONS MANUAL OPN-3102i 1st 9 Environmental Specifications 9.1 Temperature Scanning performance is guaranteed when the ambient temp. is within the following range: Operating Temperature: Storage Temperature: -10 ~ 50 °C -20 ~ 60 °C * Please charge when the temperature is between 0 and 40°C. When the temperature is over 40°C, charging may stop to prevent battery breakdown. 9.
SPECIFICATIONS MANUAL 9.5 OPN-3102i 1st Vibration Strength (without packing) There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6m/s2 (2.0 G) for 30 minutes (60 minutes per cycle) in non-operating state. Repeat this in each X, Y and Z direction. 9.6 Vibration Strength (in individual packing) There shall be no sign of malfunction after the following vibration test.
SPECIFICATIONS MANUAL OPN-3102i 1st 10 Regulatory Compliance 10.1 LED Safety IEC 62471:2006 Exempt_Group 10.2 Product Safety EN60950-1:2005 IEC60950-1:2006 10.3 EMC R & TTE Directive ・EN 55024:2010 ・EN 55032:2012+AC:2013 ・EN 301 489-1 V1.9.2 ・EN 301 489-17 V2.1.1 ・EN 300 328 V1.9.1 ・EN 302 291-2 V1.1.1 FCC Part 15 Subpart C, Subpart B ClassB Federal Communications Commission Notices This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
SPECIFIICATIONS MANUAL M OPN-3102i O 1st 10.4 O Other ・Bluetooth lo ogo certification ・MFi license “Made forr iPod,” “Made for iPhone,” a and “Made forr iPad” mean that an electronic accessory ha as been design ned to connect sp pecifically to iP Pod, iPhone, o or iPad, respectively, and has be een certified by b the develop per to meet Ap pple performance standards.Apple is not re esponsible forr the o this device or its complian nce with safetty and operation of regulatory standards.
SPECIFICATIONS MANUAL OPN-3102i 1st ・ Do not attach piece of metal or metal foil to the back of charging coil stored part and NFC coil stored part. Also, do not fix anything that prevents placing to charging cradle. ・ Please securely close the USB cap to keep the waterproof. ・ Do not pull strong, fold and bend the cables. ・ Do not add shock or apply load to jack and connector. ・ When charging is completed, please remove USB cable from connector. 13.
SPECIFICATIONS MANUAL OPN-3102i 1st 14 Product Labels The product labels are affixed to the scanner as shown below.
SPECIFIICATIONS MANUAL M OPN-3102i O 1st 15 Pa ackaging g Specific cations 15.1 In ndividual Packaging P g Asssembled pa ackage size: 125 × 112 × 40 (WDH mm) m W Weight: Appro ox. kg OPN-3102 Place in nto the box with folded side d down without taped. t *Place with w Opticon lo ogo upward. Displaay for the Serrial-No. 『123456』 123456=Prodduct serial num mber. Dispplay 6-digets serial s number. Put MicroUSB B cable and product side by b side. Make it thinne er so as not to overlap on the e product.
SPECIFIICATIONS MANUAL M OPN-3102i O 1st 15.2 C Collective Packaging P g 10 00pcs per bo ox Asssembled pa ackage size W Weight: Appro ox. kg : 595 × 520 0 × 245 (WDH mm) Thhe order of serial--No. Pa acking box: 5B000 08 (100pcs per boox) Enter battery type 「Lithium ion n battery」and pho one number 「01--2422-31-31」. An nd place 1pc next to either side of th he packing box lab bel.
SPECIFICATIONS MANUAL OPN-3102i 1st 16 Physical Features 16.1 Dimensions 83.0 × 36.0 × 21.5 (DWH mm) 16.2 Weight Approx. 60 g (excluding accessories) 16.
SPECIFICATIONS MANUAL OPN-3102i 1st 17 Supported Symbologies 17.1 Default Setting The scanner is set to default by reading the following menu label. Recorded contents of the NFC tag will also return to default. Default @MENU_OPTO@ZZ@SO@ZZ@OTPO_UNEM@ 17.2 Supported Symbologies 17.2.
SPECIFICATIONS MANUAL OPN-3102i 1st 17.2.