Wireless Handheld 2D Scanner OPI-3301 Tentative This manual provides specifications for the OPI-3301 rugged handheld 1D/2D imager scanner with autofocus.
OPI-3301 Specifications Manual All information subject to change without notice. Document History Model Number: OPI-3301 Specification Number: SS11012 Edition: 1st Original Spec Number: SS10037 Date: 2011-05-XX Copyright 2010 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.
OPI-3301 Specifications Manual Revision History Specification No.
OPI-3301 Specifications Manual Contents 1. Abstract .......................................................................................................................................................... 6 2. Overview......................................................................................................................................................... 6 3. Basic Specifications................................................................................................................
OPI-3301 Specifications Manual 14.5. Others ............................................................................................................................................... 28 15. RoHS ........................................................................................................................................................... 28 16. Precautions ........................................................................................................................................
OPI-3301 Specifications Manual 1. Abstract This manual provides specifications for the OPI-3301 rugged wireless handheld 1D/2D imager scanner. 2. Overview The OPI-3301 scanner enables data transmission of linier (1D) and 2D symbologies using Bluetooth wireless technology.
OPI-3301 Specifications Manual 3. Basic Specifications Item Specification Note OEY-0603 CPU: ARM-1026EJ-S Core: 160 MHz SDRAM 128 Mbits (1 M × 4 Banks × 32 Bits) SDCLK: 80 MHz Flash ROM 16 Mbits (1 M × 16 Bits) Flash Memory Frequency 2402 MHz ~ 2480 MHz Specification Bluetooth V2.
OPI-3301 Specifications Manual Item Specification Pitch: ±50° (Skew β = +15°) 1/2 D Common Skew: ±50° Scan angle Tilt: 360° (Skew β = +15°) *There are some areas in which scanning fails due to specular reflection. Minimum PCS Temperature Environmental Specifications Humidity Ambient light immunity Note Code: Code 39 Resolution: 0.254 mm Distance: 100 mm from the edge of the scanner *Curvature R = ∞ 0.
OPI-3301 Specifications Manual Item Specification No destruction ESD immunity No malfunction Radio-frequency electromagnetic field. Amplitude modulation Fast transient Immunity Test (*) Surge 15 kV (apply static electricity 50 times to the surface of the scanner) Contact discharge (direct / indirect): ±6 kV Air discharge (direct): ±8 kV Frequency 80 ~ 1000 MHz Level 3 V/m AM 80% (AM) Voltage Alternating-current input cable: ±1 kV Pulse 5 / 50 ns (Tr / Tw) Frequency 5 kHz Pulse 1.
OPI-3301 Specifications Manual 4. Detailed View Figure 1: Detailed View of OPI-3301 No. Description Name Laser aiming light is emitted by pressing this key to read 1D/2D codes. 1 Trigger Key 2 laser light is emitted through this window. Ensure that the lens Scanning Window The is not exposed to dust and dirt before scanning. 3 Status LED The operating status is indicated by each LED color (see 4.1. for details). Buzzer Hole A sound from a built-in buzzer comes out through these holes.
OPI-3301 Specifications Manual 4.1. Status LED and Buzzer The operating state is indicated by LED colors and buzzer sound. State LED Color Red Charging Green Blue Bar code Read Red Green Wireless Connection Blue Red Wireless Disconnection Red Low Battery Power Orange Indication Description Charging: When the scanner is placed on the cradle, the LED lights up to indicate the scanner is charged. Fully charged: LED color changes ON from Red to Green.
OPI-3301 Specifications Manual 5. Electrical Specifications 5.1. Configuration The OPI-3301 consists of - Camera Module section, where images are captured and output as analog data. - Decode and Wireless Communication Control section, where the signals from the camera section are processed. This section also controls the whole system. - Interface section that contains the user interface. - Power supply section that contains the power supply and the battery charger.
OPI-3301 Specifications Manual 5.4. Operating and Charging Time Item Sleep Battery Standby Life Reading Charging time 1 Charging Time Charging time 2 Spec 200 hours or more Approx. 12 hours Approx. 10 hours Approx. 3 hours Approx. 6 hours Remarks With wireless connection 1 scan / 5 sec with wireless connection When the cradle is connected with RS232C. When the cradle is connected with USB (Bus-Power supply) The above specification may not be satisfied when the battery pack is degraded. 6.
OPI-3301 Specifications Manual 7. Technical Specifications Aim the laser light at the center of a code to scan it. For long distance scanning, ambient light entering the angle of view may affect the scanning performance. The conditions for technical specifications are as follows, unless otherwise specified in each section.
OPI-3301 Specifications Manual 7.1.
OPI-3301 Specifications Manual 7.2. Printed Contrast Signal (PCS) 0.45 or higher (70% or more reflectivity of space and quiet zone) PCS = Reflectance of white bar－Reflectance of black bar Reflectance of white bar * Be sure to keep the optical window clean without dirt or scratches, or it may have a bad effect on the reading characteristics.. 7.3. Minimum Resolution 0.1mm 0.127mm 0.169mm 0.
OPI-3301 Specifications Manual 7.5. Curvature 8-digit JAN 13-digit JAN : R ≥ 15 mm : R ≥ 20 mm Barcode Test Sample (1D and 2D) Distance Angles : PCS 0.9, Resolution 0.26 mm, Quiet Zone 10 mm as specified in Chapter 7 : 80 mm from the front edge of the scanner. : Skew: β = 15° Figure 5: Curvature Note: Scanning may fail due to the specular reflection of illumination LEDs when the reflectivity is high.
OPI-3301 Specifications Manual 8. Bluetooth OPI-3301 uses Bluetooth as a wireless interface: Compliant with Bluetooth specification version 1.2, supporting Serial Port Profile (SPP). • Implemented Profile SPP (Serial Port Profile) • Communication Configuration 1 to 1 * 1 to N (Multiple-channel) is not supported.
OPI-3301 Specifications Manual 9. Default Settings The OPI-3301 is set to the following factory default settings by reading menu code “SO”.
OPI-3301 Specifications Manual Code type GS1 DataBar Omnidirectional GS1 DataBar Truncated GS1 DataBar Stacked GS1 DataBar Stacked Omnidirectional GS1 DataBar Limited GS1 DataBar Expanded GS1 DataBar Expanded Stacked Composite EAN EAN-13 CCA EAN-13 CCB EAN-8 CCA EAN-8 CCB Composite UPC UPC-A CCA UPC-A CCB UPC-E CCA UPC-E CCB Composite GS1 DataBar CCA CCB Limited CCA Limited CCB Expanded CCA Expanded CCB Composite GS1-128 CCA CCB CCC Read Transmit Code Length Transmit Calculate Transmit Set Prefix CD CD
OPI-3301 Specifications Manual Default Settings 3: Wireless Communication Settings Item Set connection Data memorizing Trigger connect / disconnect Trigger connect (time to press switch) Trigger disconnect Wireless communication (time to press switch) settings Auto disconnect Auto reconnect ACK/NAK ACK/NAK time out Pin code Bluetooth settings BT address auto connect Authentication Encryption “UB” Default Setting Connect to RS-232C cradle Disable Disable Disable Disable Disable 5 minutes No control 1 seco
OPI-3301 Specifications Manual 10. Product Labels The labels shown below are attached to the scanner. Figure 6: Product Labels Model name label Shows the product name, serial number, month and year of manufacture, laser caution and laser Class 2 Logo label Shows certified standard logos. Certification label Shows the standards-compliant languages and certificate numbers.
OPI-3301 Specifications Manual Serial Number Figure 7: Model Name Label Figure 8: Logo Label Figure 9: Certification Label 23
OPI-3301 Specifications Manual 11. Packaging Specifications 11.1.
OPI-3301 Specifications Manual 11.2. Collective Packaging Specification Assembled package size: 585 x 520 x 200 (WDH mm) Figure 11: Collective Packaging Note: ‘Ro mark’ on the trays and the boxes for the product indicates that the product is RoHS compliant, which is declared by Optoelectronics Co., Ltd.
OPI-3301 Specifications Manual 12. Environmental Specifications 12.1. Operating Temperature and Humidity Temperature Humidity : -20 ~ 50°C (-0 ~ 40°C when charging) : 5 ~ 85%RH (no condensation, no frost) 12.2. Storage Temperature and Humidity Temperature Humidity : -25 ~ 60°C : 5 ~ 85RH% (no condensation, no frost) 12.3. Ambient Light Immunity Scanning performance is guaranteed when the range of illumination on a barcode surface is the following values.
OPI-3301 Specifications Manual 12.4. Dust and Drip Proof IEC IP42 equivalent Protection against solid objects: Level 4 Protected against solid objects greater than 1.0 mm Protection against liquids: Level 2 (JIS IPX2) Protected against dripping water from the vertical when tilted up to 15° 12.5. Electrical Characteristics The characteristics in combination with the communication cradle CRD-3301 is included.
OPI-3301 Specifications Manual 12.8. Vibration Strength There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10 Hz to 100 Hz at an accelerated velocity of 19.6 m/s2 (2.0 G) for 60 minutes in the non-operating state. Repeat this in each X, Y and Z direction. 13.
OPI-3301 Specifications Manual 16. Precautions 16.1. Precaution against Laser Light *Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Caution - Do not stare into the laser light from a scanning window. It may harm your eyes. Do not point the laser directly at others’ eyes. It may harm your eyes. Do not stare into the beam with optical instruments. It may harm your eyes. 16.2.
OPI-3301 Specifications Manual 16.5. Export Administration Regulations This product is subject to the strategically controlled exports regulated under “Foreign Exchange and Foreign Trade Laws”. Therefore, export of this product may require an export permission of Japanese government. 16.6. Bluetooth ・ Bluetooth® is a registered trademark owned by its proprietor and used by OPTOELECTRONICS Co., Ltd. under license.
OPI-3301 Specifications Manual 17. Auto Trigger The OPI-3301 can be set to auto trigger mode. This means that the scanner starts scanning automatically when it detects a change in brightness that occurs when a bar code label is presented in front of it. 17.1. Outline of Operation In auto trigger mode, the scanner captures a barcode image using the ambient light and detects the brightness of multiple bright / dark parts in the detection area of the image (a shaded area in the figure below).
OPI-3301 Specifications Manual * When using the auto trigger function, it is recommended to fully confirm the performance under real operating conditions with bar codes, 2D codes, background and operating environments (ambient light etc.) that are actually used. *Note When scanning a barcode with low resolution from a distance, the scanner may be considerably affected by ambient lights other than the brightness of the barcode (brightness of detecting field) and start scanning.
OPI-3301 Specifications Manual Appendix 1: Mechanical Drawings Dimensions: 137 × 56 x 113 (HWD mm, except protruding portion) Figure 16: Mechanical Drawing 33
