User Manual Optiqo - Qlvr Box OQB2020 Installing the device 1. Begin by wiping the surface thoroughly, preferably with an all-purpose cleaner, in order to eliminate any grease or other residue from the area where the Qlvr Box is to be installed. 2. Allow the area to dry prior to affixing the Qlvr Box.
3. Apply double sided tape, or other adhesive, to the back of the Qlvr Box and affix to the wall at an approximate height of 150-175 cm from the floor. If the surface is not suitable for tape, you can attach the device by inserting metal screws into the prefabricated holes inside the unit casing (screws not provided) Note.
The upload failed. This may be due to the fact that the cellular network is currently unstable, or the battery level is low. ______________________________ Appears when an IN or arrival scan is registered if the Qlvr Box is set to IN and OUT function. ______________________________ Displayed when an OUT or exiting scan is made if the Qlvr Box is set to IN and OUT function.
Low battery. Use the key provided to open the Qlvr Box and replace the batteries (6 AA batteries). Once inserted, wait between 10-60 seconds for the Qlvr Box to reboot to its normal setting. ______________________________ The Box does not recognize the scanned card/tag. This may be due to the card/tag that is being scanned is not a recognized user for that specific unit or, in rare cases, the NFC tag is malfunctioning and will require replacing.
SIM: Surface mounted SIM Operator: Telia Sonera Denmark Roaming: Active roaming Batteries: 6xAA Flash memory : 1Gb RTC: +-20ppm Connection range: (max) 1g/hour (min) 1g/week Optional: PIR sensor (hit counter) 9 m range
Caution: This device complies with Part 15 of the FCC rules and Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment.