Integration manual: Option Globetrotter Data Card OPTION WIRELESS Technologies, Kolonel Begaultlaan 45, B-3012 Leuven Tel +32 16 317 411 Fax +32 16 207 164 http://www.option.
Integration Manual About this document Overview and Purpose This document describes the manner in which a Option Globetrotter datacard can be integrated into a third party device and what conditions must be fulfilled in doing so. Confidentiality All data and information contained or disclosed by this document is confidential and proprietary of Option NV, and all rights therein are expressly reserved.
Integration Manual Table of contents 1. 2. 3. 4. 5. Introduction............................................................................................................... 3 PCMCIA Interface.................................................................................................... 3 RF Connector ............................................................................................................ 4 SAR Safety measures......................................................................
Integration Manual 1. Introduction When integrating the Option Globetrotter 3G Quad Slim it is necessary to pay attention to all technical aspects described in this document. Using these guidelines is mandatory to provide certainty of the correct performance of the card in its new environment. 2.
Integration Manual 3. RF Connector When it is desired to use the datacard in conducted mode it is necessary to use the output RF connector. To connect to the output use the R299.792.000 RF connector (manufacturer Radiall). 4. SAR Safety measures Concerning specific safety guidelines we advise the end-user to keep a minimum distance of 20 cm between himself and the device. 5. FCC label When the card is integrated into the new equipment it must still have the original FCC-ID label developed by Option N.V.