Home Settings User Guide Home FAQ Useful Links Support and Help Site Map Support and Help Log Out English SMS Troubleshooting Contact us User Guide User Guide User Guide FAQ Do you need information about how to configure the iCON XYfi, or how to change your WiFi password? Or do you want to know how to set up the access mode? Useful Links Troubleshooting Contact us You will find it all in the User Guide! Quick Start Home Settings SMS LED Languages Web Browser Requirements Safety and Certif
Power Up iCON XYfi Connect to Internet Connect to Administration Pages 1.1 Insert SIM Card Index Before connecting the iCON XYfi to you PC/tablet/smartphone etc. for the first time, you must insert the SIM card supplied by your service provider: 1) Remove the top cover of the iCON XYfi. 2) Insert the SIM card and the optional micro-SD card into the corresponding card slots. 3) Put the top cover back on by inserting it into the slot at the front and press the cover down until it clicks into place. 1.
2.1 Connect Button Index Establish or terminate the connection (soft button). You can also establish or terminate the connection (physically), by pushing the LED button for 1 second. 2.2 Status Bar Index The Status Bar gives you an easy access and a quick overview of your current connection. Network Provider Technology Signal Strength Speed (Mbps) Active Users Current Access Mode 2.2.1 Network Provider Index The company that provides access to the Internet.
connecting from inside a building. If you continuously experience low signal strength in a certain area, it may be that network coverage is insufficient there. Your operator or service provider can provide you with more information on network coverage. If you believe that the problem may be with your iCON XYfi rather than the network, please contact the dealer from whom you purchased the appliance, who will arrange for it to be returned for inspection. 2.2.
Important! If you set only 'Just USB' as access mode, the WiFi access will be turned off and no one will be able to connect via wireless to your iCON XYfi. WiFi Users: If this access mode is chosen, only the devices with the access mode 'Just USB' & 'WiFi Users' will be able to connect to internet. All devices with the access mode 'Guest Users' will be blocked. Guest Users: If this access mode is chosen, all devices connected to iCON XYfi will be able to connect to internet.
3.1.1 WiFi Settings Index iCON XYfi let's you change the WiFi settings the way you want. In order for your changes to take place, you need to click the 'Save Changes' button. Changes here will disconnect all active users and they will need to reconnect. Network Name (SSID) The Network Name (SSID) is the name that you will see when your WiFi client lists networks. The name can be up to 32 characters long.
TCP & UDP - Sometimes both protocols are needed to make a connection and this should be chosen. External Port Enter the external port number you want to be used by iCON XYfi. You can also specify a range of ports. For example: 1-80 (maximum number of ports = 65535). If you use a range, it should be the same range used for the internal port. Internal IP Address Enter the IP address of the device that should receive the requests.
WPS enables you to use push button or a PIN code instead of entering a network name (SSID) and WiFi password by hand. Options for adding a WPS device: Push button: You can press the 'Start' button (soft button) in the 'WiFi Network' pages. Then press the WPS button on the device you want to connect to, and they will start pairing. PIN (Personal Identification Number): The PIN is to be entered to the connecting device and it is generated from iCON XYfi. Enter this PIN and they will start pairing.
3.3.3 Connection Method Index Choose your connection method iCON XYfi let's you change the connection method to suit your needs. Connection method gives you the following choices: Manually: Connect to the Internet by clicking 'Connect' on the Connection Status page in the management console. You can also establish or terminate the connection (physically), by pushing the LED button for 1 second. Automatic upon traffic: iCON XYfi will automatically connect when you attempt to send data via the Internet.
Organise your users and devices 3.4.1 Maximum number of WiFi/Guest users Index You can allow access for up to a maximum of 8 users/devices connecting to your iCON XYfi using WiFi. 3.4.2 Organise your users and devices Index Here you have the possibility to see which devices that are currently connected/offline/blocked to your iCON XYfi and edit/change access mode etc. per device. Colour codes in front of each device: Green: This device is currently connected to your iCON XYfi.
IP is the protocol within TCP/IP (Internet protocol Suite) that is used to send data between computers over the Internet. An IP address is an assigned number used to identify a computer that is connected to a network through TCP/IP. An IP address consists of four numbers (each of which can be no greater than 255) separated by periods, such as 172.22.2.1. Subnet Mask A mask used to determine to what subnet an IP address belongs.
Blue Solid - Connected 3G Violet/Blue Flashing - Registered Roaming Violet/Blue Solid - Connected Roaming Blue Flashing (2 times) - Connected to WiFi Red Flashing (2 times) - WPS connection is on Amber Solid - SIM issue Amber Flashing - text message received Red/Blue Flashing - Problem/Firmware crash Red/Green Flashing - Restore to factory settings (LED will become 'amber' when done). It will only flash red/green when restoring using the physical LED button (not when using soft button). 6.
