User Manual

ManualsBrandsOption ManualsElectronicsWireless Pack

Wireless Pack User’s Guide 1–1

Getting Started

Congratulations on the purchase of your new Compaq iPAQ

Pocket PC GSM/GPRS Wireless Data and Voice Pack. Your

Wireless Pack integrates the power of a state-of-the-art digital

mobile Wireless Pack with the simplicity of your Compaq iPAQ

handheld computer.

To use your Wireless Pack, you must first activate your account

with your network provider. See page 9 of this chapter.

Your account information is located on your SIM (Subscriber

Identity Module) card. If a SIM card did not come with your

Wireless Pack, your network provider will provide one when you

subscribe to their service. Your SIM card must be inserted into

your Wireless Pack before you can use it.

Just follow the seven easy steps in this chapter to get up and

running quickly.

Summary of content (14 pages)

PAGE 1
Getting Started Congratulations on the purchase of your new Compaq iPAQ Pocket PC GSM/GPRS Wireless Data and Voice Pack. Your Wireless Pack integrates the power of a state-of-the-art digital mobile Wireless Pack with the simplicity of your Compaq iPAQ handheld computer. To use your Wireless Pack, you must first activate your account with your network provider. See page 9 of this chapter. Your account information is located on your SIM (Subscriber Identity Module) card.
PAGE 2
Getting Started Step 1: Setting up your handheld computer 1. If you haven’t already set up your handheld, follow the steps that came with your handheld to set it up. 2. (Recommended) Synchronize your handheld with your computer. If you need additional information about synchronizing, refer to the User manual that came with your handheld.
PAGE 3
Getting Started Step 2: Getting to know your Wireless Pack Wireless Pack User’s Guide 1–3
PAGE 4
Getting Started Jacket Components Component 1–4 Function Antenna Receives and sends signals on your Wireless Pack. The antenna does not telescope out of the Wireless Pack. Audio jack Enables you to connect a headset so you can view your handheld screen while you are on a voice call. Internal Battery Battery is incorporated into the sleeve and powers your Wireless Pack. Power Turns on your Wireless Pack and activates the signal.
PAGE 5
Getting Started Jacket Components Component Function Power Button Your Wireless Pack stays on until you remove it from your handheld or press the power button to turn it off. Speaker Functions as the earpiece on your Wireless Pack. LED Provides status information for your Wireless Pack for GSM / GPRS.
PAGE 6
Getting Started To adjust the volume during a voice call, press the scroll buttons on the front of your handheld.
PAGE 7
Getting Started Step 3: Insert your SIM card The SIM (Subscriber Identity Module) card is a small rectangular plastic piece. The SIM card is included with your service provider’s documentation and is often referred to as a “smartcard”. If your SIM card is already inserted in your Wireless Pack, skip to Step 4. Insert the SIM card into the slot.
PAGE 8
Getting Started To remove your Wireless Pack from your handheld, slide the sleeve down and off your iPAQ.
PAGE 9
Getting Started Step 5: Charge the battery 1. Plug the travel charger into a wall outlet. 2. Insert the travel charger cable into the connector on your handheld. You can also put your handheld with the Wireless Pack into the cradle and insert the travel charger into the connector on the cradle. When your Wireless Pack is on, the charge icon appears in the software application while your Wireless Pack charges.
PAGE 10
Getting Started Step 6: Turn on your Wireless Pack After the battery is charged, you can begin using your Wireless Pack 1. Press the Power button on your Wireless Pack for two seconds until you hear a beep. 2. Wait maximum two minutes for your Wireless Pack to locate your service provider’s network. Do not tap OK. When your Wireless Pack locates the network, the Network Search dialog displays a Welcome message and your network provider’s name appears in the upper-left corner of the Voice application.
PAGE 11
Getting Started Step 7: Activate your account If you received a new SIM card with your Wireless Pack, you need to call your network provider to activate your account. Your network provider’s telephone number is located on the materials that came with your Wireless Pack Once you receive your telephone number, it may take a few hours to become fully active. Some network providers send a special message with your telephone number. Follow these steps to check the telephone number: 1.
PAGE 12
Getting Started Congratulations You’re ready to use your Wireless Pack. Keep these things in mind as you use your new device: • If you travel outside a coverage area, your Wireless Pack remains on but you can’t make or receive calls. If this occurs, the LED blinks red quickly and the Wireless Pack periodically tries to register to the network. When you return to a coverage area, the LED blinks green slowly. • If you travel outside a coverage area, you can’t receive SMS text messages.
PAGE 13
Getting Started Appendix: Safety and General Information Exposure to Radio Frequency Energy Exposure to Radio Frequency Energy The Wireless Pack Radio Product is designed to comply with the following national standard regarding exposure of human beings to radio frequency electromagnetic energy: • American National Standards Institute (ANSI IEEE. C95. 1-1992) FCC Statement This device complies with part 15 of the FCC rules.
PAGE 14
Getting Started The use of shielded I/O cables is required when connecting this equipment to any and all optional peripheral or host devices. Failure to do so may violate FCC rules. Canadian RFI Statement This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.