User's Manual

User manual for device - GSM

Once the device is received, open the sim card slot, enter a micro sim card and turn

on the toggle switch on.

The status LED can be one of the 3 colors red, green or blue. It should take

approximately around 30 seconds to turn green, but if it gets stuck in between, the

conditions are mentioned below.

Red: It means the device is not connected to the GPRS network or the area where the

device is being used has no network coverage.

Blue: It means the device is connected to the internet via 2G network.

Green: It means that the device is connected to the server and its ready for being

used.

Fixing method: Use double-sided tape to make the product stick to the table to

achieve a fixed effect.

PAGE 1
User manual for device - GSM Once the device is received, open the sim card slot, enter a micro sim card and turn on the toggle switch on. The status LED can be one of the 3 colors red, green or blue. It should take approximately around 30 seconds to turn green, but if it gets stuck in between, the conditions are mentioned below. Red: It means the device is not connected to the GPRS network or the area where the device is being used has no network coverage.
PAGE 2
1. MQTT server details 1. Host name: hub.swittons.com 2. Username: swittonsdevice 3. Password: swttonsprescriber360 2. Topic details for edge device 1. Publisher: swittons/ 2. Subscriber: swittons/DEVICE_ID (where IMEI number for GSM) 3. Edge device behaviour for topics vs messages The edge device should execute certain actions if a specific message is received on the topic mentioned in point (2.2). Message: ERR Action: Light up RED LED in a blinking pattern for 2 times.
PAGE 3
Note: The client ID for the edge device should be unique and in no way similar to one another. The message format as mentioned in point 4 should always be a valid JSON STRING. FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.