Handheld Bluetooth 2D Imager Scanner OPI-3301i This manual provides specifications for the OPI3301i handheld Bluetooth 2D imager scanner.
OPI-3301i Specifications Manual All information subject to change without notice. Document History Model Number: OPI-3301i Specification Number: SS14060 Edition: 2nd Original Spec Number: SS14015 Date: 2015-07-24 Copyright 2015 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.
OPI-3301i Specifications Manual Revision History Specification No. Product name Edition First : SS14060 : OPI-3301i Date 2014/11/26 Page 1 Section 2 2 3. 3 4 Second 2015/07/16 6 7 9 5.1 7.1. 8. 10 8.1. 12 8.3. 12 8.4. 12 13 13 15 16 8.5. 8.6. 8.7. 8.8.3. 9.3. 10.1. 18 10.2. 10.3. 22 14. Description of Changes Initial release Deleted: Vibration, Antimicrobial. Deleted: Vibration motor Changed: 1D Minimum resolution 0.127 -> 0.
OPI-3301i Specifications Manual Contents 1. Abstract ..........................................................................................................................................1 2. Overview ........................................................................................................................................1 3. Basic Specifications .....................................................................................................................2 4. Detailed View ........
OPI-3301i Specifications Manual 10. Regulatory Compliance ............................................................................................................18 10.1. LED Safety .........................................................................................................................18 10.2. Product Safety ....................................................................................................................18 10.3. EMC ...................................................
OPI-3301i Specifications Manual 1. Abstract This manual provides specifications for the OPI-3301i handheld Bluetooth 2D imager scanner. 2. Overview The OPI-3301i is a handheld 2D imager scanner that enables high speed scanning of standard linear (1D) and 2D symbologies. The scanned data is output via Bluetooth. ・ All bar code data scanned is transmitted to a host device through the Bluetooth interface.
OPI-3301i Specifications Manual 3. Basic Specifications Item Specification Control Section Input Section Indicator CPU 32 bit CISC / 96 MHz FROM 512 Kbyte + 32 Kbyte SRAM 96 Kbyte FROM (storage) 1 Mbyte Key type 1 key: trigger LED 2 colors (red, green) and 1 color (blue) Buzzer Loudness (3-level) / tone adjustable Interface Bluetooth For data area only Frequency 2402 ~ 2480 MHz Specification Bluetooth Ver 2.
OPI-3301i Specifications Manual Item GS1/Composite Symbologies Minimum resolution Symbologies Supported 2D Symbologies Minimum resolution (mm) PDF417 Depth of field (mm) QR Code DataMatrix Specification Note GS1 DataBar, GS1 DataBar Limited, GS1 DataBar Expanded, Composite GS1 DataBar, Composite GS1-128, Composite EAN, Composite UPC GS1 DataBar : 0.169 mm Composite Code : 0.
OPI-3301i Specifications Manual Item Specification LED safety IEC 62471:2006 Exempt_Group Regulatory Compliance EN60950-1:2006 IEC60950-1:2005 EN 55022:2010 EN 301 489-1 V1.9.2 EN 301 489-17 V2.1.1 EN 300 328 V1.8.
OPI-3301i Specifications Manual 4. Detailed View 3 4 2 1 5 Figure 1: Detailed View of OPI-3301i No Name Description 1 Trigger Key A key to read bar codes 2 Scan Window LED illumination is emitted from this window to read bar codes. 3 Status LED The operating statuses, such as bar code reading, Bluetooth connection and warning, are indicated by different colors. 4 Buzzer Holes A sound from a built-in buzzer comes out through these holes.
OPI-3301i Specifications Manual 5. Electrical Specifications 5.1. Current Consumption Standby Sleep Item Specification 15 mA or less 1 mA or less Operating 330 mA or less Measurement condition Power voltage 3.7 V at 25 °C Note With wireless connection Reading, communications, LED 5.2. Operating Time and Charging Time Item Sleep Battery Standby duration Reading Charging time Specification 200 hours or more Approx. 72 hours Approx. 24 hours Approx.
OPI-3301i Specifications Manual 7. Optical Specifications 7.1. Basic Optical Specifications Item Characteristics Scan method CMOS area sensor (white / black) - Effective pixels (Column) × (Row) 752 × 480 dots Image capture speed (*1) Frame rate 60 fps Focal distance Distance from the front edge of scanner 104 mm Horizontal Approx. 40.6° Vertical Approx. 26.
OPI-3301i Specifications Manual 7.2. Aiming Pattern The aiming is used for the following purpose: 1. Light source to indicate the appropriate reading range 2. Light source for auto trigger operation The aiming specifications are as follows: ・ An optical axis of imaging field of view and the center of horizontal aiming width coincide at a distance of L=65±20 mm from the front edge of the scanner.
OPI-3301i Specifications Manual 8. Technical Specifications Code reading is performed by positioning the aiming light over the center of a code. The conditions for technical specifications are as follows unless otherwise specified in each section. Temperature and humidity Ambient light Angles Curvature Power supply voltage PCS (1D and 2D) Scanning Test Bar code test sample (1D and 2D) : Room temperature, room humidity : 100 ~ 200 lx : Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0° :R=∞ : 3.
OPI-3301i Specifications Manual 8.1. Bar Code Test Sample 1D Bar Codes Resolution 0.1 mm 0.127 mm 0.20 mm 0.254 mm 0.508 mm Symbology PCS Size (mm) 9 × 10 32 × 10 100 × 10 32.5 × 12 36 × 25 No. of Digits 4 15 31 7 4 Code 39 0.9 Resolution 0.20 mm Symbology Code 128 PCS 0.9 Size (mm) 42 × 10 No. of Digits 16 Resolution 0.330 mm Symbology 12-digit UPC PCS 0.9/0.2 Size (mm) 31.5 × 25.0 No. of Digits 12 Resolution 0.150 mm Symbology Codabar (NW-7) PCS 0.
OPI-3301i Specifications Manual 8.2. Scan Area and Depth of Field The scan area is within the arc centered on the scan origin as shown in each resolution, which is measured from the front edge of the scanner. 100 50 200 150 300 250 Resolution 0.127 60 Code 39 95 Resolution 0.254 45 Resolution 0.508 50 Code 128 100% UPC PDF417 185 Resolution 0.20 65 Resolution 0.33 45 55 Resolution 0.169 150 175 105 . 0.254 Resolution 35 250 155 Resolution 0.212 QR Code 70 95 Resolution 0.
OPI-3301i Specifications Manual 8.3. Printed Contrast Signal (PCS) 0.2 or higher MRD Distance Bar code : 12% and higher (70% or higher reflectivity of space and quiet zone) : 105 mm from the front edge of the scanner : UPC (resolution 0.33 mm, PCS 0.2) specified in Section 8.1.
OPI-3301i Specifications Manual 8.6. Pitch, Skew and Tilt Pitch Skew Tilt Bar code Distance Curvature Angle : α = ±50° : β = ±50° : γ = ±180° : UPC (resolution 0.33 mm) specified in Chapter 8.1 : 105 mm from the front edge of the scanner :R=∞ : Pitch β = +15°, γ = 0° Skew, Dead zone α = 0°, γ = 0° Tilt α = 0°, β = +15° α - β + + γ - + Figure 5: Pitch, Skew and Tilt 8.7. Curvature 0.33 mm 12-digit UPC 0.
OPI-3301i Specifications Manual 8.8. Auto Trigger When the scanner is placed in a dedicated stand (sold separately) which contains a magnet, it can detect this magnet and enters auto trigger mode. The scanner starts scanning automatically when it detects a change in brightness that occurs when a bar code label is presented in front of it. 8.8.1.
OPI-3301i Specifications Manual 8.8.3. Motion Tolerance 100% UPC bar codes moving at 2m/s can be read. Temperature / Humidity Ambient light Distance PCS Bar code : Room temperature / room humidity : 500 ~ 1000 lx : 105 mm from the front edge of the scanner : 0.9 or higher : Refer to Section 8.1. Figure 9: Motion Tolerance * The reading characteristics may deteriorate due to the specular reflection of LED illumination when the reflectivity is high.
OPI-3301i Specifications Manual 9. Environmental Specifications 9.1. Temperature Scanning performance is guaranteed when the range of ambient temperature around the scanner is the following values: Operating temperature Storage temperature : 0 ~ 50 °C : -20 ~ 60°C 9.2.
OPI-3301i Specifications Manual 9.6. Vibration Strength (in individual packing) There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes per cycle) in individually packaged state. Repeat this in each X, Y and Z direction. 9.7. Drop Impact Strength (without packaging) There shall be no sign of malfunction after the following drop test.
OPI-3301i Specifications Manual 10. Regulatory Compliance 10.1. LED Safety IEC 62471:2006 Exempt_Group 10.2. Product Safety EN60950-1:2006 IEC60950-1:2005 10.3. EMC R&TTE Directive ・EN 55022:2010 ・EN 301 489-1 V1.9.2 ・EN 301 489-17 V2.1.1 ・EN 300 328 V1.8.1 FCC Part 15 Subpart C Class B Federal Communications Commission Notices This product complies with Part 15 of the FCC Rules.
OPI-3301i Specifications Manual 10.4. Others ・Bluetooth logo certification ・MFi license “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards.Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
OPI-3301i Specifications Manual (4) Others ・Do not disassemble this product. ・Do not use this product near a radio or a TV. It may cause reception problems. ・This product may be affected by a momentary voltage drop caused by lightning. ・iPhone, iPad and iPod are trademarks of Apple Inc. ・Other company and product names may be trademarks of their respective owners. 13.2. Radio Law This product qualifies as specified radio equipment for radio stations of 2.
OPI-3301i Specifications Manual 14. Product Labels The product labels are affixed to the scanner as shown below. Logo label Product label Figure 11: Product Labels Product label Shows the product name, serial number, and month and year of manufacture. Logo label Shows the standards-compliant languages and logos.
OPI-3301i Specifications Manual 15. Packaging Specifications 15.1.
OPI-3301i Specifications Manual 15.2. Collective Packaging Assembled package size : 585 × 520 × 200 (WDH mm) OSE OSE OPI-3301i-AM-V *OF1OPI3301AMV* Figure 13: Collective Packaging * ‘Ro mark’ on the boxes for the product indicates that the product is RoHS compliant declared by Optoelectronics Co., Ltd.
OPI-3301i Specifications Manual 16. Physical Features 16.1. Dimensions 56 × 113 × 132 (WDH mm / excluding protruding portion) 16.2. Weight Approx. 132 g (excluding accessories) 16.3.
OPI-3301i Specifications Manual 17. Supported Symbologies 17.1. Default Setting The scanner is set to default settings by reading the following menu label. Default @MENU_OPTO@ZZ@SO@ZZ@OTPO_UNEM@ 17.2. Supported Symbologies 17.2.1.
OPI-3301i Specifications Manual 17.2.2.
