PX-36 V-1.0 PX-36 2D Data Collector with Bluetooth The PX-36 is a Data Collector with a 2D barcode scan engine, Bluetooth communication and time stamp functionality. V-1.
PX-36 V-1.0 The information in this document is subject to change without notice. Document History Model Number: Revision: PX-36 V-1.0 Original release date Date 31-08-2015 31-08-2015 2015 Copyright Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.
PX-36 V-1.
PX-36 V-1.0 Contents 1 Abstract ........................................................................................................................ 6 2 Overview ....................................................................................................................... 6 3 Basic Specifications .................................................................................................... 7 3.1 4 5 6 7 8 Ambient Light Immunity conditions ......................................
PX-36 V-1.0 9.2 Product Safety ....................................................................................................................... 23 9.3 EMC ....................................................................................................................................... 23 10 Labeling ...................................................................................................................... 24 10.1 Serial Number label ..............................................
PX-36 V-1.0 1 Abstract This manual provides specifications for the PX-36 Bluetooth data collector with built-in 2D barcode scanner. 2 Overview The PX-36 is a programmable data collector that features a CMOS image sensor, built-in Bluetooth and IrDA for data communication. The CMOS barcode engine is able to read barcodes in its view, regardless of their direction even when they are upside down they can be read. This scanner is also particular well suited to read barcodes from LCD screens.
PX-36 V-1.
PX-36 V-1.0 Item Specification GS1/Composite Symbologies Minimum resolution Symbologies Supported 2D Symbologies Minimum resolution (mm) GS1 DataBar, GS1 DataBar Limited, GS1 DataBar Expanded, Composite GS1 DataBar, Composite GS1-128, Composite EAN, Composite UPC GS1 DataBar 0.169 mm Composite Code 0.
PX-36 V-1.0 Item Regulatory Compliance Immunity Test Physical Features 3.1 Specification LED safety Note IEC 62471-1:2006 Exempt Group EN60950-1:2005 IEC60950-1:2006 EN 55022:2010 EN 301 489-1 V1.9.2 EN 301 489-17 V2.1.1 EN 300 328 V1.8.
PX-36 V-1.0 4 Electrical Specifications 4.1 Main Battery The main battery is a lithium-ion secondary battery. Nominal capacity: 1880 mAh Battery charging time: Approximately 7 hours Battery type: NP120, without leads 4.
PX-36 V-1.0 5 Mechanical 5.1 Dimensions W 44.0 mm x D 25.0 mm x H 140.0 mm 5.2 Weight 115 g (max.), excluding the lithium-ion battery 5.
PX-36 V-1.0 5.4 Detailed view Figure 3: Detailed view No. Items Descriptions 1 IrDA Infra-red transceiver 2 LED Indicator 3 LCD 4 Up / Down keys Infrared port for communication with the cradle. Indicator of operating status, such as bar code reading, Bluetooth and warnings Monochrome Liquid Crystal display to show the decoded data, operational processes and so on. Up/down keys used to move between menu items.
PX-36 V-1.0 6 Interface Specifications 6.1 Bluetooth Frequency 2402 ~ 2480 MHz Specification Bluetooth 2.1 compliant Communication distance 10 m Output level Class 2 (max 4 dBm) Implemented profile Communication configuration SPP / HID Classic Bluetooth GAP based Low Energy mode 1 to 1 Operating mode in communication Master / Slave mode Security mode Authentication supported Encryption Encryption supported 6.2 IrDA 6.2.
PX-36 V-1.0 7.2 Aiming Pattern The aiming pattern is used for the following purposes: 1. Light source to indicate the appropriate reading range. 2. Light source for auto trigger operation. The specifications for the aiming pattern are as follows: ・ The optical axis of the field of view and the center of the aiming pattern coincide at a distance of L=65±20 mm from the front edge of the scanner. ・ The width of the aiming pattern is 80%±10% of the width of the field of view at a distance of L=65mm.
PX-36 V-1.0 7.4 7.4.1 Barcode reading/decoding specifications Conditions When the aiming patter is positioned over the centre of a barcode label, the scanner is able to read it. The conditions for the following specifications are as follows unless otherwise specified in each section. Temperature and humidity Ambient light Angles Curvature PCS (1D and 2D) Scanning Test Bar code test sample (1D and 2D) Room temperature, room humidity 100 ~ 200 lx Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0° R=∞ 0.
PX-36 V-1.0 7.4.2 Bar Code Test Sample 1D Bar Codes Resolution 0.1 mm 0.127 mm 0.20 mm 0.254 mm 0.508 mm Symbology PCS Size (mm) 9 × 10 32 × 10 100 × 10 32.5 × 12 36 × 25 No. of Digits 4 15 31 7 4 Code 39 0.9 Resolution 0.20 mm Symbology Code 128 PCS 0.9 Size (mm) 42 × 10 No. of Digits 16 Resolution 0.330 mm Symbology 12-digit UPC PCS 0.9/0.2 Size (mm) 31.5 × 25.0 No. of Digits 12 Resolution 0.150 mm Symbology Codabar (NW-7) PCS 0.
PX-36 V-1.0 7.4.3 Scan Area and Depth of Field The depth of field is measured from the edge of the data collector. The scanning range is within the circular arc centered on the scan origin.
PX-36 V-1.0 7.4.4 Printed Contrast Signal (PCS) 0.2 or higher MRD Distance Bar code 12% and higher (70% or higher reflectivity of space and quiet zone) 105 mm from the front edge of the scanner UPC (resolution 0.33 mm, PCS 0.2) specified in Section 8.1.
PX-36 V-1.0 7.4.7 Pitch, Skew and Tilt α = ±50° β = ±50° γ = ±180° Pitch Skew Tilt Bar code Distance Curvature Angle UPC (resolution 0.33 mm) specified in Chapter 7.4.2 105 mm from the front edge of the scanner R=∞ Pitch β = +15°, γ = 0° Skew, Dead zone α = 0°, γ = 0° Tilt α = 0°, β = +15° Figure 7: Pitch, Skew and Tilt 7.4.8 Curvature 0.33 mm 12-digit UPC 0.15 mm 10-digit Codabar (NW-7) Bar code Distance Angle R ≥ 20 mm R ≥ 16 mm UPC (0.33 mm) and Codabar (0.
PX-36 V-1.0 7.4.9 Motion Tolerance UPC bar codes moving at 2m/s can be read for 100%. Temperature / Humidity Ambient light Distance PCS Bar code Room temperature / room humidity 500 ~ 1000 lx 105 mm from the front edge of the scanner 0.9 or higher Refer to Section 7.4.2 Figure 9: Motion tolerance * The reading characteristics may deteriorate due to specular reflection of the LED illumination when reflectivity is high.
PX-36 V-1.0 8 Environmental Specifications 8.1 Temperature Scanning performance is guaranteed when the range of ambient temperature around the scanner is the following values: Operating temperature Storage temperature 8.2 0 ~ 50 °C -20 ~ 60°C Humidity Scanning performance is guaranteed when the range of ambient humidity around the scanner is the following values: Operating humidity Storage humidity 20 ~ 85% RH (no condensation, no frost) 20 ~ 85% RH (no condensation, no frost) 9.3.
PX-36 V-1.0 8.3 Drop Impact Strength (without packaging) There shall be no sign of malfunction after the following drop test. Drop test: Drop the scanner 12 times in total (2 times at the 6 positions as indicated) from a height of 150 cm onto a concrete floor. Figure 10: Drop test 8.4 Drop Impact Strength (in individual packaging) There shall be no sign of malfunction after the following drop test.
PX-36 V-1.0 9 Regulatory Compliance 9.1 LED Safety IEC 62471:2006 Exempt Group 9.2 Product Safety EN60950-1:2006 IEC60950-1:2005 9.3 EMC R&TTE Directive ・EN 55022:2010 ・EN 301 489-1 V1.9.2 ・EN 301 489-17 V2.1.1 ・EN 300 328 V1.9.1 FCC Part 15 Subpart B Class B Federal Communications Commission Notices This product complies with Part 15 of the FCC Rules.
PX-36 V-1.0 10 Labeling The PX-36 has two labels, a serial number label and an FCC warning label. Figure 11: PX-36 product labels 10.1 Serial Number label Detailed drawing: Figure 12: Serial number label Label dimension: 31.5mm x 24.5mm. Tolerance ± 0.3mm Label material: Consist of base + laminate protection against wear. Base : PP film, Pantone Cool gray 1, thickness 80µm, backing with glue. Laminate : PET film, clear, thickness 25µm, backing with glue.
PX-36 V-1.0 10.2 FCC Warning Label Detailed drawing: Figure 13: FCC warning label Label dimension: 31.5mm x 12.5mm. Tolerance ± 0.3mm Label material: Consist of base + laminate protection against wear. Base : PP film, Pantone Cool gray 1, thickness 80µm, backing with glue. Laminate : PET film, clear, thickness 25µm, backing with glue. Colors: Pantone Black 10.3 White box label Size is 70mm x 25mm with a tolerance of ± 2 mm Example labels: Avery 3421 or similar.
PX-36 V-1.0 11 Packaging Specifications 11.1 Individual Packaging Specification (TBD) Put the PX-36 in a protective foam bag and place it in an individual packing box, then place the accessories into the box. Close the box and affix a label to the side of the box.
PX-36 V-1.0 11.3 Collective Packaging Specification Put 150 individually packaged data collectors in a collective packing box. The box can hold 162 boxes, so there will be some empty space in the shipping box. That should be filled by packing peanuts. Dimensions: 615 mm (W) by 520 mm (D) by 277 mm (H).
PX-36 V-1.0 12 Safety precautions Handle this product carefully. Do not deliberately subject it to any of the following. 12.1 Shock Do not throw or drop the data collector. Do not drop or put heavy items on this product. 12.2 Temperature Conditions Do not use the data collector at temperatures outside the specified range. Do not use near heat sources such as radiators, heat registers, stoves, or other types of devices that produce heat.