OPTICON User's manual PHL-7000 series Key Main Function SHIFT Definition Press and release the SHIFT key to activate the keypad alternate SHIFT functions. The icon appears on the taskbar. Press and release the SHIFT key again to return to the normal keypad functions. The key is used in combination Function change with other keys to type special characters and perform system functions. Enter This key confirms data entry Table 2-4 Definition of main Function 2.4.8.
OPTICON User's manual PHL-7000 series Key Sequence Fn + Main Function Definition 3. Move the cursor down one page. The cursor will move continuously if button is pressed continuously. Page Down 4. You must press key, then press key to cursor down one page each time. 3. Move the cursor up one page. The cursor will move continuously if button is pressed continuously. Page Up 4. You must press key, then press key to cursor up one page each time.
OPTICON User's manual PHL-7000 series Key Sequence Fn + Main Function Definition pressing key. Enter a ] by pressing pressing key. key, then ] Enter a { by pressing key, then { pressing Enter a key. } by pressing key, then } pressing Enter a key. € by pressing key, then € pressing Enter a key. $ by pressing key, then $ key. pressing Enter a # by pressing key, then # pressing key. Enter a % by pressing key, then % press Enter a key. ^ by pressing ^ press key.
OPTICON User's manual PHL-7000 series Key Sequence Fn + Main Function Definition Enter a ~ by pressing pressing key. key, then ~ Enter a , by pressing key, then , pressing key. Enter a 、 by pressing key, then 、 pressing key. Enter a ! by pressing pressing key. Enter a ? by pressing pressing key. key, then ! key, then ? \ Enter a \ by pressing pressing key. Enter a = by pressing key, then key, then = key. press Increases device volume, press key and then press key.
OPTICON User's manual PHL-7000 series Key Sequence Fn + Main Function Definition pressing / Enter a key. / character by pressing key, then pressing key. Enter a @ by pressing key, then @ pressing key. Enter a ’ by pressing key, then ’ pressing key. Enter a ＋ by pressing key, then ＋ pressing key To do a paste function by pressing Paste key key first, and then pressing each time. To do a delete action, press key Del first, and then press Enter a －by pressing key.
OPTICON User's manual PHL-7000 series Key Sequence Fn + Main Function Definition pressing key. Enter a ＊ by pressing key first, ＊ and then pressing key. To display Start menu press key Start Menu first, and then pressing key each time. Enter a Space character by pressing Space key first, and then pressing key each time.
OPTICON User's manual PHL-7000 series 2.4.9 Using the Ear/Microphone Connect the ear/microphone set to PDT earphone jack connector. The PDT has no built in microphone, if you like to record the voice, you have to the use ear/microphone set.
OPTICON User's manual PHL-7000 series 2.5 Navigating the Display 2.5.1 Setting Time and Date In the Date/Time options, you can change the year, month, date, time, time zone, or select automatic adjust for daylight saving time. To set or change the date and time: 1. Select Start > Settings > Control Panel > Date/Time. 2. To change the year, select the year. Select the up arrow to increase the value, select the down arrow to decrease the value. Or you can type a new value in the field. 3.
OPTICON User's manual PHL-7000 series 2.5.3 The Command Bar Use the Command bar at top of the screen to perform tasks in programs, such a opening a file, or editing a file. 2.5.4 The Task Bar The Task bar at the bottom of the screen displays the icon, an icon for the active program, the current time, and system icons for utilities loaded in memory. The Task bar includes menu names, buttons, and the keyboard icon, which opens and closes the Soft Input Panel (SIP).
OPTICON User's manual PHL-7000 series 2.5.5 The Soft Keypad In applications that accept keypad input, the Soft Input Panel (SIP) can be used to enter data using the stylus. The SIP is a software, QWERTY-style keyboard. To open the SIP, tap the keyboard icon to open the menu and select Hide Input Panel to close the keyboard. Use the stylus to select letters, numbers, or symbols from the Soft Input Panel for the current application. 2.5.
OPTICON User's manual PHL-7000 series 802.11b WLAN is not connected to a network. 802.11b WLAN no signal. 802.11b WLAN signal is Low. 802.11b WLAN signal is Average. 802.11b WLAN signal is Good.
OPTICON User's manual PHL-7000 series 2.5.7 Reading bar codes, 1D laser version. To use the scanning function, complete the following steps: 1. If you have not already done so, remove the protective plastic film before using devices equipped with a 1D laser bar code reader. 2. Run the WordPad software program. 3. Press one of the three bar code reader trigger buttons. 4. Aim the scanning beam at the center of bar code. 5. Good scanning position. The reading range is from 50 to 650mm distance.
OPTICON User's manual PHL-7000 series 2.5.8 Reading bar codes, 2D CMOS version. The 2D CMOS version can read both 1D and 2D bar codes. To use the scanning function, complete the following steps: 1. If you have not already done so, remove the protective plastic film before using devices equipped with a 2D CMOS bar code reader. 2. Run the WordPad software program. 3. Press one of the three bar code reader trigger buttons. 4. Aim the scanning beam at the center of bar code.
OPTICON User's manual PHL-7000 series 6. Bad scanning position. 1) Make sure that the laser beam sweeps across whole bar code. 2) Scanning operations may fail if the illumination beam is positioned as below. 7. Upon reading a bar code, the red LED indicator turns on until the trigger is release or after five seconds. The green LED and the beep tone indicates a good read. 2.5.9 Help Tap “?” to get information for each program.
OPTICON User's manual PHL-7000 series 2.6 Power management 2.6.1 Suspend Mode The PDT will go into a suspend mode when it is idle for a period of time. The idle duration can be customized using the Power control panel (refer to Figure “Schemes Tab”) Suspend mode works and looks just like you have turned the unit off. Press the key to suspend the PDT, Press the key again for the PDT to resume its Previous state.
OPTICON User's manual PHL-7000 series 2.6.2 Resuming Use the following method to resume (wake up the PDT): Press key to suspend or resume (wake up). When a battery pack completely discharges while the unit is in suspend mode, the PDT remains suspended until discharged battery condition is corrected. l 2.7 Resetting the PDT 2.7.1 Warm Reset A warm reset is a transition from the on, idle, or suspend power state that close all applications, clears the working RAM, but preserves the file system.
OPTICON User's manual PHL-7000 series Chapter 3. PDT settings 3.1 Introduction To view available options for PDT’s setting, tap Start > Settings. Then, there are three items inside Settings: “Control Panel”, “Network and Dial-up” and “Taskbar and Start”. 3.2 Control Panel To view the Control Panel and settings you can modify by tapping Start > Settings > Control Panel.
OPTICON User's manual PHL-7000 series 3.2.1 BarCode Settings ICON ITEM & FUNCTION • Start bar code settings tool : ü ü ü ü ü Enable or disable bar code scanner Select bar code symbologies Select prefixes and suffixes Select quiet zone options Select read mode options 3.2.1.1 Basic TAB In the “Basic tab” the bar code reader behavior can be changed. Figure 3-2 Basic Tab Field name Enable bar code reader Description Enable or disable the bar code reader. Default is enabled.
OPTICON User's manual PHL-7000 series Beep After Scan OK Keybd Message Read mode Read time Select the number of beeps after scanning a bar code which is successfully decoded by the bar code reader. None Disable beep after scanning bar code. One Time Beep one time after scanning bar code (default). Two Times Beep two times after scanning bar code. Select the bar code data transfer method Disable Data from bar code reader is ignored.
