OPTICON User's manual PHL-7000 series Figure 3-70 Network and Dial-up Figure 3-71 Network and Dial-up Connections Connections 3-40
OPTICON User's manual PHL-7000 series 3.2.12 Owner ICON ITEM & FUNCTION • ü ü ü • ü “Identification” Tab : (Figure 3-74) Fill in or edit the data as desired. To have this information displayed when you start your device, select “Display Owner Identification” at Power On. To set up identification for remote networks, see Setting up identification for remote networks. “Network ID” Tab: (Figure 3-75) Enter the user name, password, and domain name you use to log on to remote network.
OPTICON User's manual PHL-7000 series 3.2.13 Password ICON ITEM & FUNCTION • “Password Setting” Tab : (Figure 3-76) ü Enter the password ü In the “Confirm password “box, enter the password again. To require the password on startup, select “Enable password protection at power- on“. and/or select “Enable password protection for screen saver” To exit the Password control panel, press “OK” from the control bar, or press the key on the keypad.
OPTICON User's manual PHL-7000 series 3.2.14 PC Connection ICON ITEM & FUNCTION • ü ü ü ü “PC Connection” Tab : (Figure 3-77) Select the first checkbox to enable direct connections to the desktop computer. (Figure 3-77) Tap the “Change Connection… ” button to modify the connection method from USB or Serial. (Figure 3-78) To exit the “Change Connection” dialog, press “OK” from the control bar, or press the key on the keypad.
OPTICON User's manual PHL-7000 series 3.2.15 Power ICON ITEM & FUNCTION • ü ü ü ü ü • ü ü ü “Battery” Tab : (Figure 3-79) Provide change level indicators for Main battery and Backup battery. Provide remaining power capacity of main battery. If a “Main Batteries very Low” warning message shows, the remaining battery life is around 30 minutes before PDT shuts down.
OPTICON User's manual PHL-7000 series Figure 3-77 Power Figure 3-78 Power Figure 3-79 Power Figure 3-80 Power Figure 3-81 Power 3-45
OPTICON User's manual PHL-7000 series 3.2.16 Regional Settings ICON ITEM & FUNCTION • “Region” Tab : (Figure 3-84) ü Select the desired location/language. ü Review the Appearance samples in the bottom half of the screen. Select the Tab at the top for any settings you wish to ü change, Options to modify include Number, Currency, Time, and Date.
OPTICON User's manual PHL-7000 series 3.2.17 Remove Programs ICON ITEM & FUNCTION • ü Ø “Remove Programs” Tab : Only user installed programs can be removed. Select the program you wish to remove from the list and press “remove” button. Table 3-37 Remove Programs 3.2.18 Storage Manager ICON ITEM & FUNCTION • “Storage Manager” Tab : (Figure 3-83) To change Storage properties control panel default settings: Insert Compact Flash(CF) or Secure digital (SD) storage card into the unit.
OPTICON User's manual PHL-7000 series Figure 3-83 Storage Manager 3.2.19 Stylus ICON ITEM & FUNCTION • ü ü ü ü • “Double-Tap” Tab : (Figure 3-86,Figure 3-87) Double-tap the checkerboard grip at a comfortable speed. Double-tap clapboard to test your settings. The function is OK if the figures are changed from Figure 3-86 to Figure 3-87. To tap “OK” to exit the Stylus Properties.
OPTICON User's manual PHL-7000 series Figure 3-84 Stylus Properties Figure 3-85 Stylus Properties Figure 3-86 Stylus Properties Figure 3-87 Stylus Properties 3-49
