User Manual Part 6

ManualsBrandsOpticon Sensors Europe ManualsElectronicsPortable Data Terminal

OPTICON

User's manual

PHL-7000 series

Note: If the device to which the PDT is bonding does not appear in the list,

ensure it is turned on, in discoverable mode, and within range (30 feet / 10

meters) of the PDT.

Icon Description

Unknown device icon

Device is not defined

Locked icon Device is locked and can not be bonded to.

Not locked icon Device is not locked and can be bonded to.

Bluetooth device icon

Bluetooth device

Bonded device icon Bonded Bluetooth device

Mobile device icon Device is a mobile device

Phone icon Device is a phone.

Printer icon Device is a printer

Network icon Device is a network.

Linked icon Device is linked.

Table 3-18 Bluetooth Icons

Summary of content (7 pages)

PAGE 1
OPTICON User's manual PHL-7000 series Note: If the device to which the PDT is bonding does not appear in the list, ensure it is turned on, in discoverable mode, and within range (30 feet / 10 meters) of the PDT. Icon Description Unknown device icon Device is not defined Locked icon Device is locked and can not be bonded to. Not locked icon Device is not locked and can be bonded to.
PAGE 2
OPTICON User's manual PHL-7000 series 3.2.3 Certificates Certificates are used by some applications for establishing trust and for secure communications. Certificates are signed and issued by certificate authorities and are valid for a prescribed period of time. Windows CE manages multiple certificate stores. ICON ITEM & FUNCTION • ü ü ü ü “Store” Tab ( Figure 3-31) : In the Stores tab, select the certificate store you wish to view or modify from the drop-down list (Figure 3-32).
PAGE 3
OPTICON User's manual PHL-7000 series Figure 3-31 Certificates Figure 3-32 Certificates Figure 3-33 Certificates Figure 3-34 Certificates Figure 3-35 Certificates 3-22
PAGE 4
OPTICON User's manual PHL-7000 series 3.2.4 Control Center The Control Center includes four Property buttons. These are property buttons for PDT device information, display brightness, system Backup Restore and Fn-Key Settings. Figure 3-36 Control Center 3.2.4.1 Information ICON ITEM & FUNCTION • ü “Information” Tab : Provide Software version, MAC address, Bluetooth ID, Serial No. and Configuration No.
PAGE 5
OPTICON User's manual PHL-7000 series 3.2.4.2 Brightness ICON ITEM & FUNCTION LCD Brightness Tune the LCD brightness by tapping right-arrow & left-arrow. Can also tune the LCD brightness by pressing right-direction key or left-direction key of keypad. Amounts 7 steps: Every step have corresponding picture of self. 1. 2. 3. 5. 6. 7. Enable Keypad Brightness 4. Open keypad brightness or not. Backlight Timeout Save battery life by automatically turning off the backlight when not used.
PAGE 6
OPTICON User's manual PHL-7000 series Figure 3-37 Brightness 3-25
PAGE 7
OPTICON User's manual PHL-7000 series 3.2.4.3 Backup Restore ICON 1. 2. 3. 4. 5. ITEM & FUNCTION You can backup/restore the system to/from flash disk or inserted memory card. (A. Disk on Chip, B. CF Card, C. SD Card, Figure 3-38) When you launch this application, it must check backup file in Disk On Chip first. And if you select other storage, it will check again. If a previous backup file is found, its date appears behind “Last backup date:”; if not, the “Restore Now” button is disabled.