Portable Terminal H - 32 The H-32 is a portable Windows CE terminal with a color display and a built-in laser scan engine (1D or 2D).
Opticon H - 32 Specifications Manual All information subject to change without notice. Document History Model Number: H-32 Specification Number: Edition: 1.08 Original Spec Number: Date: 2013-10-21 Copyright 2012 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.
Opticon H - 32 Specifications Manual Contents 1. Abstract ..................................................................................................................................... 5 2. Overview ................................................................................................................................... 5 3. Physical Features ..................................................................................................................... 5 3.1. Dimensions ..............
Opticon H - 32 Specifications Manual 9.3. Wide Bar Code ................................................................................................................ 19 9.4. Motion Tolerance ............................................................................................................. 19 9.5. Barcode Test Sample ...................................................................................................... 20 9.6. Scan Area and depth of Field .......................................
Opticon H - 32 Specifications Manual 1. Abstract This manual provides specifications for the H-32 portable terminal (hereafter referred to as “scanner”). 2. Overview The H-32 is a fully programmable portable Windows CE terminal with a built-in laser scan engine. Applications can be developed in C++/C# and all other languages supported by Windows CE and can be installed in the H-32’s internal flash memory. The H-32 also features a Micro SD memory expansion option on which e.g.
Opticon H - 32 Specifications Manual 4. Environmental Specifications 4.1. Operating Temperature and Humidity Temperature: -10 to 50° C Humidity: 20% to 80% RH 4.2. Charging Temperature Temperature: 0 to 40° C 4.3. Storage Temperature and Humidity Temperature: -20 to 60° C Humidity: 20% to 90% RH 4.4.
Opticon H - 32 Specifications Manual what the user may reasonably expect from the H-32 if used as intended. Performance criterion B During and after testing, a temporary loss of function is allowed, provided the function is self recoverable, or can be restored by the operation of the controls or cycling of the power to the H-32 by the user in accordance with the manufacturer’s instructions. If performance drop of USB Datalink occurs due to ESD please remove and re insert the USB connector.
Opticon H - 32 Specifications Manual 5. Controls Items Specifications Remarks Type AM3354 ARM Cortex A8 Internal ROM 176K Internal Boot ROM Internal RAM 64 KB Excluding cache memory Clock frequency 720 MHz Maximum ROM 256 MB NAND Flash RAM 256 MB Mobile DDR2 SD Card Micro SD card, HC support When booting, max 4GB Active area W 43.2 x H 57.6 mm 2.
Opticon H - 32 Specifications Manual 5.1.
Opticon H - 32 Specifications Manual 6. Electrical Specifications 6.1. Electrical Characteristics (Current measured at 3.7V operating voltage) Parameter Typ Unit Remarks Operating voltage 3.4–4.2 V Lithium-ion battery Operating current 300 mA Backlight on, WLAN connected, 1 scan/minute Stand-by current <200 mA Not scanning, WiFi off, backlight on. <4 mA When the power is OFF Sleep current 6.2.
Opticon H - 32 Specifications Manual 7. Optical Specifications 7.1. Laser Scan Specifications MDL2001 Parameter Light-emitting element Emission wavelength Light output Scanning method Scanning speed Scan angle ° Specification Red laser diode 650 ±10 (25° C) Light output 1.0 or less Bi-directional scanning 100 ±20 Scan angle: 54 ±5 Read angle: 44 (Min) Unit nm mW scans/s ° ° Notes: Refer to chapter 8, “Technical Specifications,” to read about scanning performance. 7.1.1.
Opticon H - 32 Specifications Manual 7.2. Basic Optical Specifications MDI3100 Scan method Number of effective pixel Image capture speed (*1) Focal distance View angle Auxiliary light source ( LED × 2 ) Light source for aiming ( LED x 1) Item CMOS area sensor (black and white) (H) × (V) Frame rate Characteristics 752 × 480 dot 60 fps From the front edge of scan engine Horizontal Vertical Red LED 130 mm Approx. 40.6° Approx. 26.
Opticon H - 32 Specifications Manual Figure 2: Aiming Pattern MDI3100 13
Opticon H - 32 Specifications Manual 8. Technical Specifications MDL2001 The conditions are as follows, unless otherwise specified. Conditions Ambient temperature and humidity: Room temperature (5 to 35º C) Room humidity (45% to 85% RH) Ambient light: 500 to 900 lx Background: Barcode = black Space = white Margin = white Background of label = black 3.3 V Power supply voltage Decoding test: Approve the performance when decoding is successful in all ten tests.
Opticon H - 32 Specifications Manual 8.4. Scan Area and Resolution 8.4.1. Depth of Field The depth of field is measured from the edge of the scanner. The scanning range is within the circular arc centered on the scan origin. Figure 3: Depth of field MDL2001 Conditions Barcode Sample: OPTOELECTRONICS Test Sample N/W Ratio: 1:2.5 Angle: α = 0°, β = 15°, γ = 0° Curvature: R=∞ Resolution (mm) Symbology PCS Quiet Zone Digits 1.0 Code 39 0.9 25 mm 1 0.5 Code 39 0.9 18 mm 3 0.
Opticon H - 32 Specifications Manual 8.5. Pitch, Skew, and Tilt Pitch angle: α = ±35° Skew angle: β = ±50° (Excluding dead zone) Dead zone: β = ±8° (There are some areas in which decoding fails due to specular reflection) Tilt Angle: γ = ±20° Figure 4: Pitch, skew, and tilt MDL2001 Conditions Barcode Sample: OPTOELECTRONICS Test Sample Distance Label Angle 110 mm from the exit window Pitch, Skew Angle, Dead Zone PCS = 0.9, Resolution = 0.
Opticon H - 32 Specifications Manual Figure 5: Curvature MDL2001 Conditions Barcode Sample: OPTOELECTRONICS Test Sample PCS = 0.9, Resolution = 0.
Opticon H - 32 Specifications Manual 9. Technical Specifications MDI3100 Emit aiming light of the MDI-3100-SR to the center of a bar code for scanning. The conditions for technical specifications are as follows, unless otherwise specified in each section.
Opticon H - 32 Specifications Manual Bar Code Sample : The above codes specified in Chapter 8 Distance : 100 mm from the front edge of the camera module Angle : α = 0°, β =＋15°, γ = 0° Curvature :R=∞ For the pitch angle and tilt angle measurement, set the skew angle β = +15° 9.3. Wide Bar Code Code 39 with width of 100 mm and resolution of 0.2 mm can be read. Conditions> Bar Code Sample Distance Angle Curvature : 0.
Opticon H - 32 Specifications Manual 9.5.
Opticon H - 32 Specifications Manual 9.6. Scan Area and depth of Field The scan area is measured from the front edge of the camera module.
Opticon H - 32 Specifications Manual 9.7. Pitch, Skew, and Tilt Pitch Skew Tilt : α = ±50° : β = ±50° : γ = ±180° Bar Code Sample : 0.33 mm UPC specified in Chapter 8 Distance : 130 mm from the front edge of the camera module Curvature :R=∞ For the pitch angle and tilt angle measurement, set the skew angle β = +15° Figure 8: Pitch, Skew, and Tilt MDI3100 9.8. Curvature 0.33 mm 12-digit UPC : R ≧ 20 mm 0.15 mm 10-digit Codabar : R ≧ 16 mm Conditions> Bar Code Sample Distance Angle : 0.
Opticon H - 32 Specifications Manual 10. Labeling 10.1. Product label The product label with the serial number as shown below is affixed to the scanner. Figure 10: Product labels The serial number consists out of 6 numeric digits. It starts with 000001 and is incremented with 1 for each scanner. The serial number is also stored in the scanners non volatile memory and API functions are available to retrieve the serial number for use in user applications. Material: Base + laminate protection against wear.
Opticon H - 32 Specifications Manual 11. Packaging Specifications 11.1.
Opticon H - 32 Specifications Manual 11.2. Collective Packaging Specification TBD Figure 12: Collective packaging Note: The “RO” mark labeled on the package tray or package box guarantees that the applicable product has passed our test of RoHS restrictions compliance (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC). However, this document does not have any legal weight in the European Union.
Opticon H - 32 Specifications Manual 12. Regulatory Compliance 12.1.Laser Safety (1D model) IEC 60825-1:2007 Laser Class 2 CDRH Laser Class 2 FDA CDRH Laser class II. Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50 dated June 24, 2007. Class II laser devices are not considered to be hazardous when used for their intended purpose. Avoid staring into the laser beam. 12.2.EMC EN55022 EN55024 Federal Communications Commission (FCC) Statement 15.
Opticon H - 32 Specifications Manual FCC RF Radiation Exposure Statement: For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 5.0mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. 12.3. RoHS RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC.
Opticon H - 32 Specifications Manual 13. Safety Handle this product carefully. Do not deliberately subject it to any of the following. 13.1. Shock Do not throw or drop the scanner. Do not place heavy objects on the scanner. 13.2. Temperature Conditions Do not use the scanner at temperatures outside the specified range. Do not pour boiling water on the scanner. Do not throw the scanner into the fire. Do not leave the scanner on the dashboard of a car. 13.3.
Opticon H - 32 Specifications Manual 14.
