EE-290 EE-290 V-0.4 Electronic Shelf Label The EE-290 is an e-paper based electronic shelf label with a screen size of 2.9” and with 802.15.4 based wireless communication. V-0.
EE-290 V-0.4 The information in this document is subject to change without notice. Document History Model Number: Revision: EE-290 V-0.4 Original release date Date 08-01-2016 29-02-2016 2016 Copyright Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.
EE-290 V-0.4 Revision History Product Name : EE-290 Edition Date V0.1 2015/10/02 V0.2 2015/10/13 V0.3 2016/01/08 V0.4 2016/02/29 Page p6 p10 p15 p15 p16 p17 P6 P6 P7 Section Section 3, Section 7, Section10.1, Section10.2, Section 11.4, Section 12 Section 3.2 Section 3.2 Section 4.
EE-290 V-0.4 Contents 1 Abstract ........................................................................................................................ 6 2 Overview ....................................................................................................................... 6 3 Physical Features ......................................................................................................... 6 4 3.1 Dimensions .....................................................................
EE-290 V-0.4 Table of Figures Figure 1: Dimensions ............................................................................................................................... 6 Figure 2: Product Label ......................................................................................................................... 11 Figure 3: Product Label dimensions ...................................................................................................... 11 Figure 4: Shipment box label ...........
EE-290 V-0.4 1 Abstract This manual provides specifications for the EE-290 Electronic Shelf Label (hereafter referred to as “ESL”). 2 Overview The EE-290 is an E-ink based ESL with a 2.4GHz radio for data communication. This product uses Direct Sequence Spread Spectrum RF technology that allows for ultra-low power consumption combined with a reduced sensitivity to background noise. That means less interference by other radios that operate in the 2.4GHz band.
EE-290 V-0.4 4 Environmental Specifications 4.1 Operating Temperature and Humidity Temperature: Humidity: 4.2 Storage Temperature and Humidity Temperature: Humidity: 4.
EE-290 V-0.4 5 6 Controls Items Specifications Remarks Type 8051 core 8-bit MCU Internal flash ROM 128KB Internal RAM 8 KB Clock frequency 32 MHz Active area W 66.90 x H 29.06 mm Number of dots W 296 x H 128 Dot pitch 112 Horizontal 112 Vertical Modulation DSSS Frequency 2405 - 2480 MHz Baud rate 250 Kbits / second CPU LCD Radio Dots per Inch Globally approved 2.4GHz band.
EE-290 V-0.4 7 Electrical Specifications 7.1 Electrical Characteristics Conditions: Operating voltage 3.0V unless otherwise specified Parameter Typ Unit Remarks Operating voltage 2.3-3.3 V Lithium primary battery Sleep current 2-5 µA When the transmitter and receiver are idle Poll time >= 20 seconds See below The ESL is in sleep mode almost the entire time. The device wakes up at regular intervals (called the poll time) and it then transmits a poll request to the base station.
EE-290 V-0.4 Battery replacement SOP: 1. Remove the front cover 2. Slide out the 2pcs CR2450 batteries 3. Insert new 2pcs CR2450 batteries 4. Add the front cover. 8 Radio Specifications Parameter Min Receiver sensitivity Nominal output power Frequency 8.1 -3 Typ Max Unit -97 -89 dBm 4.5 7 dBm 2480 MHz Over the entire temp.
EE-290 V-0.4 9 Labeling 9.1 Product Label The product label is affixed to the ESL as shown below. Figure 2: Product Label Label material: Material: Base + laminate protection against wear. Base: PP film, thickness 80µm, backing with glue. Laminate: PET film, clear, thickness 25µm. RoHS compliant Label dimension: 46mm x 9.9mm (w x h) Tolerance ± 0.1mm Corner radius 3mm Barcode area: The size of the barcode area (without the human readable part) is 3x38mm). The barcode shows the product serial number.
EE-290 V-0.4 9.2 Shipment Box Labels The shipment box labels are meant to show the regulatory information on the shipment box as well as the quantity in the box. The labels are 150mm*95mm and are made from plain paper with adhesive backing. Figure 4: Shipment box label Label A shows the PO number, the Quantity in the box and the serial number range, all encoded in barcodes as shown. In case there are two or less missing serial numbers, only label A is required.
EE-290 V-0.4 10 Packaging Specifications 10.1 Individual Packaging Specification The ESL’s do not need to be packed separately. To easily pack them, 20 pcs need to be packed in a plastic molder tray: Figure 5: Individual packaging 10.2 Collective Packaging Specification Pack the tray with 20 EE-290’s in a plastic bag, fold the open end of the bag and fix it with a piece of tape.
EE-290 V-0.4 Put 10 stacks, containing 200 ESL’s inside a box and stick the shipment box label on the indicated position. Use cardboard and a plastic bag between each layer of ESL’s as shown below. Figure 7: collective shipment packaging Note: The “RO” mark labeled on the package tray or package box guarantees that the applicable product has passed our test of RoHS restrictions compliance (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC).
EE-290 V-0.4 11 Regulatory Compliance 11.1 Product Safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 IEC 60950-1:2005 (2nd Edition)+Am 1:2009+Am 2:2013 11.2 EMC EN55022: 2010 EN55024: 2010 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.
EE-290 V-0.4 11.3 WEEE Waste Electrical and Electronics Equipment Directive, 2012/19/EU. 11.4 RoHS RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2011/65 EC.
EE-290 V-0.4 12 Safety Handle this product carefully. Do not deliberately subject it to any of the following. 12.1 Shock Do not throw or drop the ESL. Do not place heavy objects on the ESL. 12.2 Temperature Conditions Do not use the ESL at temperatures outside the specified range. Do not pour boiling water on the ESL. Do not throw the ESL into the fire. Do not leave the ESL on the dashboard of a car. 12.3 Foreign Materials Do not immerse the ESL in liquids. Do not subject the ESL to chemicals. 12.
EE-290 V-0.
