EE-150 EE-150 V-0.1 Electronic Shelf Label The EE-150 is an e-paper based electronic shelf label with a screen size of 1.54” and with 802.15.4 based wireless communication. V-0.
EE-150 V-0.1 The information in this document is subject to change without notice. Document History Model Number: Revision: EE-150 V-0.1 Original release date Date 19-05-2016 12-9-2016 2016 Copyright Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.
EE-150 V-0.1 Revision History Product Name : EE-150 Edition Date V0.0 2016/05/19 V0.
EE-150 V-0.1 Contents 1 Abstract ........................................................................................................................ 6 2 Overview ....................................................................................................................... 6 3 Physical Features ......................................................................................................... 6 4 3.1 Dimensions ....................................................................
EE-150 V-0.1 Table of Figures Figure 1: Dimensions ............................................................................................................................... 6 Figure 2: Product Label ......................................................................................................................... 11 Figure 3: Product Label dimensions ...................................................................................................... 11 Figure 4: Shipment box label ..........
EE-150 V-0.1 1 Abstract This manual provides specifications for the EE-150 Electronic Shelf Label (hereafter referred to as “ESL”). 2 Overview The EE-150 is an E-ink based ESL with a 2.4GHz radio for data communication. This product uses Direct Sequence Spread Spectrum RF technology that allows for ultra-low power consumption combined with a reduced sensitivity to background noise. That means less interference by other radios that operate in the 2.4GHz band.
EE-150 V-0.1 4 Environmental Specifications 4.1 Operating Temperature and Humidity Temperature: Humidity: 4.2 Storage Temperature and Humidity Temperature: Humidity: 4.
EE-150 V-0.1 5 Controls Items CPU LCD Radio Specifications Remarks Type 8051 core 8-bit MCU Internal flash ROM 128KB Internal RAM 8 KB Clock frequency 32 MHz Active area W 27.51 x H 27.51 mm Number of dots W 152 x H 152 Dot pitch 140 Horizontal 140 Vertical Modulation DSSS Frequency 2394 ~ 2507 MHz Baud rate 250 Kbits / second Dots per Inch Globally approved 2.4GHz band.
EE-150 V-0.1 6 Electrical Specifications 6.1 Electrical Characteristics Conditions: Operating voltage 3.0V unless otherwise specified Parameter Typ Unit Remarks Operating voltage 2.3~3.3 V One CR2540 Lithium primary battery Sleep current 1 µA When the transmitter and receiver are idle Poll time >= 20 seconds See below The ESL is in sleep mode almost the entire time. The device wakes up at regular intervals (called the poll time) and it then transmits a poll request to the base station.
EE-150 V-0.1 7 Radio Specifications Parameter Min Typ Max Unit -97 -89 dBm 4.5 7 dBm 2480 MHz Over the entire temp. and operating voltage range dB Signal strength indication that can be reported to the base station Receiver sensitivity Nominal output power Frequency 7.1 -3 2405 Transfer rate 250Kbit/s RSSI range 100 Remarks Over the entire temp. and operating voltage range Protocol Modified 802.15.4 (Physical layer and Media Access Control layer). 7.1.
EE-150 V-0.1 8 Labeling 8.1 Product Label The product label is affixed to the ESL as shown below. Figure 2: Product Label Label material: Material: Base + laminate protection against wear. Base: PP film, thickness 80µm, backing with glue. Laminate: PET film, clear, thickness 25µm. RoHS compliant Label dimension: 20.4mm x 12.4mm (w x h) Tolerance ± 0.1mm Corner radius 2.7mm Radius 2.7mm 12.4 20.
EE-150 8.2 V-0.1 Shipment Box Labels The shipment box labels are meant to show the regulatory information on the shipment box as well as the quantity in the box. The labels are 105mm*160mm and are made from plain paper with adhesive backing. Figure 4: Shipment box label This is the standard Opticon shipping label, design rev2 and the various variable fields in the above drawing are indicative only.
EE-150 V-0.1 9 Packaging Specifications 9.1 Individual Packaging Specification The ESL’s do not need to be packed separately.
EE-150 9.2 V-0.
EE-150 9.3 V-0.1 Collective Shipment Packaging Specification. Figure 7: collective shipment packaging Note: The “RO” mark labeled on the package tray or package box guarantees that the applicable product has passed our test of RoHS restrictions compliance (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC). However, this document does not have any legal weight in the European Union.
EE-150 V-0.1 10 Regulatory Compliance 10.1 Product Safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 IEC 60950-1:2005 (2nd Edition)+Am 1:2009+Am 2:2013 10.2 EMC EN55022: 2010 EN55024: 2010 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.
EE-150 V-0.1 10.3 WEEE Waste Electrical and Electronics Equipment Directive, 2012/19/EU. Following information is only f or EU-member states: The use of this symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
EE-150 V-0.1 11 Safety Handle this product carefully. Do not deliberately subject it to any of the following. 11.1 Shock Do not throw or drop the ESL. Do not place heavy objects on the ESL. 11.2 Temperature Conditions Do not use the ESL at temperatures outside the specified range. Do not pour boiling water on the ESL. Do not throw the ESL into the fire. Do not leave the ESL on the dashboard of a car. 11.3 Foreign Materials Do not immerse the ESL in liquids. Do not subject the ESL to chemicals. 11.
EE-150 V-0.