Installation Manual

www.opticomtech.com
Instructions
1. Unscrew the top portion of the base from the bottom portion.
2. Mount camera base to wall or ceiling.
3. Connect the BNC Connection attached to the camera to your cable.
4. Connect the Power Connection attached to the camera to your cable.
5. Adjust camera using internal triaxial mount to get the correct angle.
6. Adjust varifocal lens for correct depth & width of view.6. Adjust varifocal lens for correct depth & width of view.
7. Attach top portion of base with Dome cover to the bottom portion
(mounted) of the base.
Warranty Information
Opticom Technologies provides a one (1) year parts and labor warranty on this
camera. This product is warranted to be free from defects in workmanship and
material under normal use. Normal operation includes use of the camera as
part of a closed circuit television system or other resonable application to
which the camera may be suited.
This warranty specifically excludes damage caused by misuse, abuse, alteraThis warranty specifically excludes damage caused by misuse, abuse, altera-
tions, water damage, external shorting, applying incorrect voltage, reversing
polarity, static electrical damage, or failure to properly mount the camera.
Product Returns
In order to expedite goods returned to Opticom for warranty,
replacement, or non-warranty repair, please call 888-410-2447
to obtain an RMA number.