User's Manual

ManualsBrandsOPTICIS ManualsElectronicsOptical Graphic Extension Module

M1-2x2H-TR (Ver. 1.0)

- 1 -

www.opticis.com

Contents

♦ Description

♦ Features

♦ Applications

♦ Technical Specifications

♦ Functions

♦ Drawing of Modules

♦ Drawing of Cable Connections

♦ HDMI Pin Description

♦ Pin Description of DDC Connector

♦ Reliability Test

DATA SHEET

Optical HDMI Modules

M1-2x2H-TR

Headquarter

Opticis Co., Ltd.

# 501, ByucksanTechnopia,

434-6 Sangdaewon-Dong, Chungwon-Ku

Sungnam City, Kyungki-Do, 463-120

South Korea

Tel: +82 (31) 737-8033~9

Fax: +82 (31) 737-8079

www.opticis.com

North American Office

Opticis North America Inc.

70 East Beaver Creek Road Unit 30

Richmond Hill, Ontario L4B 3B2

Canada

Tel: +1 (905) 882-7019

Fax: +1 (905) 882-7025

Summary of content (11 pages)

PAGE 1
M1-2x2H-TR (Ver. 1.0) www.opticis.com DATA SHEET Optical HDMI Modules M1-2x2H-TR Contents ♦ Description ♦ Features ♦ Applications ♦ Technical Specifications ♦ Functions ♦ Drawing of Modules ♦ Drawing of Cable Connections ♦ HDMI Pin Description ♦ Pin Description of DDC Connector ♦ Reliability Test Headquarter North American Office Opticis Co., Ltd.
PAGE 2
M1-2x2H-TR (Ver. 1.0) www.opticis.com Optical HDMI Module - HDMI Fiber Detachable Connection System Description The M1-2x2H-TR HDMI Module is a new member of the Opticis family of products that stretches your HDMI connectivity. The M1-2x2H-TR offers an option of DDC connection over a copper cable with industrial secure connectors, which makes it easier to install.
PAGE 3
M1-2x2H-TR (Ver. 1.0) www.opticis.com ♦ M1-2x2H-TR uses two duplex LC patch cord fibre cables for graphic data with (x=S) SN-9 connector or (x=R) RJ-45C copper cable for EDID/HDCP parameter control and power management. The shipping group is shown as follows; 1) One transmitter converting electrical to optical signals, model name: M1-2x2H-T 2) One receiver converting optical to electrical signals, model name: M1-2x2H-R 3) HDMI copper cables: 2 X M1-HDMICO-010 (1.
PAGE 4
M1-2x2H-TR (Ver. 1.0) www.opticis.com Technical Specifications General Specifications - Parameter Components Electrical Optical Connect Specifications 850nm Multi-mode VCSEL (Vertical Cavity Surface Emitting Laser) GaAs PIN-PD TMDS Level (complying with HDMI1.0) Max. 1.62Gbps Max. 309 ps Max. 6ns Min 10.
PAGE 5
M1-2x2H-TR (Ver. 1.0) www.opticis.com Note1. Tested with a 50mVp-p sinusoidal signal in the frequency range from 500 Hz to 500 MHz on the VCC supply with the recommended power supply filter in place. Typically less than a 0.25 dB change in sensitivity is experienced. Note2. Graphic Supply Voltage is regulated reference voltage for signal processing in modules Note3. Measure signals at the end of 2 meter 50/125um MMGOF Note4. Measure in 1GHz of frequency bandwidth Note5.
PAGE 6
M1-2x2H-TR (Ver. 1.0) www.opticis.com Functions - Power Save Mode in Transmitter Module The laser diodes work only when +5V voltage should be supplied into the 18-pin in HDMI connectors, that is, detecting plugging the HDMI plug to the DVD or other video source. The voltage passing through a regulator from the +5V power or external power has LD drive circuit work.
PAGE 7
M1-2x2H-TR (Ver. 1.0) www.opticis.
PAGE 8
M1-2x2H-TR (Ver. 1.0) www.opticis.
PAGE 9
M1-2x2H-TR (Ver. 1.0) www.opticis.com Pin Description for DDC Connector 1) SN-9 Connector Pin 1 2 3 4 5 6 7 8 Symbol DDC Data CEC DDC Clock GND 5V_IN GND Power GND 9 HPD Pin 1 2 3 4 5 6 7 Symbol GND DDC Data GND CEC Power DDC Clock 5V_IN Functional Description DDC Data line for DDC2B communication CEC line for CEC protocol DDC Clock line for DDC2B communication Ground 5V power (HDMI No.
PAGE 10
M1-2x2H-TR (Ver. 1.0) www.opticis.com Reliability Test We have three kinds of test criteria for a reduction of variability and a continuous improvement of the process by our FMEA (Failure Mode and Effective Analysis) program. 1) Mechanical test (Vibration, Shock) 2) Temp. & Humidity test 3) EMC test Mechanical and Temp.
PAGE 11
M1-2x2H-TR (Ver. 1.0) www.opticis.