PRODUCT GUIDE & ASSEMBLY INSTRUCTIONS Console Table
Should you prefer to speak with a customer service representative, you may call toll free Guidelines FAILURE TO FOLLOW THESE WARNINGS WHEN IN USE COULD RESULT IN INJURY • Do not stand on the item or use as a step ladder • Do not use this item unless all bolts and screws are firmly secured and fastened. • Check all bolts and screws every 90 days. As necessary tighten if any are loose. • Lift up then move.
WARNING: DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK OF INJURY. Pre-Assembly Preparation: Please read through this instruction booklet before beginning assembly of this item. Two adults are recommended for assembly. • Clear out the space for assembly and lay out all parts on Parts List, extra room will allow you to easily determine if all the pieces are present. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
Parts List Top (1) Legs (4) Leveler (4) 5
Step 1 1. Ensure all parts have been removed from the carton. Place them on a protected surface or carpet. 2. Check all parts and hardware against the “Parts List.” 3. Attach the Legs (B) to the Top (A). Tighten by hand in a clockwise direction as shown below.
Step 2 1. Connect the Levelers (C) to the Legs (B).
Step 3 1. Place the table onto a flat level surface and level the console using the Levelers (C). ATTENTION: Be certain that are fully tightened before using table.
Step 4 WE STRONGLEY RECOMEND ATTACHING THIS UNIT TO THE WALL TO PREVENT THE TABLE FROM TOPPLING OVER. Wall straps are already pre-assembled on table. Assembly Steps to attach your table to the wall 1. Use a pencil to mark the fixing positions on the wall. 2. Drill holes and insert appropriate wall plugs into the wall (not provided). 3. Place the product against the wall and ensure that the strap is under top panel. 4.
Product Dimension 10
Limited Warranty The manufacturers products are warrantied against defects in material and workmanship while owned by the “Original Purchaser”. The term “Original Purchaser” is defined as the party or entity which purchases this manufacturer’s furniture from an authorized retailer as shown by the original sales receipt. This warranty does not apply to “as is” or previously owned products.