MRW-6030 Manual (Ver 0.0.1) Specification USB Controller : GDS30C6001 (HYUNDAI) File Downloading Speed : 130Kbytes/sec Dimension : 68.9mm(W) X 37.1mm(H) X 15.
INFORMATION TO THE USER (Part 15, Section 15.105(b)) INFORMATION TO THE USER Τηισ εθυιπµεντ ηασ βεεν τεστεδ ανδ φουνδ το χοµπλψ ωιτη τηε λιµιτσ φορ α Χλασσ Β διγιταλ δεϖιχε, πυρσυαντ το παρτ 15 οφ τηε ΦΧΧ Ρυλεσ. Τηεσε λιµιτσ αρε δεσιγνεδ το προϖιδε ρεασοναβλε προτεχτιον αγαινστ ηαρµφυλ ιντερφερενχε ιν α ρεσιδεντιαλ ινσταλλατιον.
Connecting to PC (Writer connection method) 1) Connect MMC Writer to the USB port. 2) Moment after, a message is shown to say that it found device. Here, click the “Next>” to begin driver installation. 3) Select ‘the search for driver that is appropriate to the device(recommend)’ and click “Next>” button. 4) This is a window to designate the driver location. - After checking as shown in the picture, click the “ (R)” button to designate the location and click the “Confirm” button.
6) After the installation, the following device name appears. When clicking the “Complete” button, the drive installation is completed.
Program Installation 1) Execute Setup.exe. 2) Press the "Next (N)>" button. 3) After selecting "I accept the terms in the license agreement”, press the "Next>" button. 4) This is a window to designate the folder to be installed. Press the "Change" button only when changing the folder, after change the folder and press the "Next>" button. And when not changing, press the "Next>" button to go to the next. 5) Message to begin “Install” appears. When pressing the "Install" button, the installation begins.
) When installation is completed, press the "Finish" button to complete the installation.
Program Use Method When program is executed, the following picture appears. After inserting the MMC card into Writer, press No.2 button. - Download (File copy from PC to MMC) 1) Set-Shell is executed at [Begin]-[Program (P)]-[cowon]-[Jet-Shell]. *Click No.2 button when executing the program. 2) Insert MMC card into Writer. 3) After selecting the desired file, press " " button.
3) After selecting the desired file, press " " button. - Delete the file from MMC card 1) Set-Shell is executed at [Begin]-[Program (P)]-[cowon]-[Jet-Shell]. *Click No.2 button when executing the program. 2) Insert MMC card into Writer. 3) After selecting the desired file, press " X " button. - MMC Card Format 1) Set-Shell is executed at [Begin]-[Program (P)]-[cowon]-[Jet-Shell]. *Click No.2 button when executing the program. 2) Insert MMC into Writer.
4) When talk box is shown, press the "Start" button. 5) When work is complete, press the "Close" button.
