CONTENTS Introduction Product Functions & Features What’s Included in the Package Description of Parts Clipping the A1 onto Sun Visor OLED Display Accelerometer Sensor Charging the Battery Switching the A1 ON/OFF Echo & Noise Cancellation Pairing and Connecting A1 with Bluetooth Devices Using A1 for Handsfree Operations Firmware Upgrading Specifications 4 5 6 6 6 7 7 8 8 9 10 11 12 13 Safety Instructions z Check the laws and regulations on the use of mobile phones and handsfree equipments in areas you i
Introduction The sonorix Bluetooth Handsfree Kit A1 is a state-of-the-art wireless ‘handsfree’ and ‘speakerphone’ for handsfree operations at its best. It functions as 'Car Handsfree Kit' or 'Portable Speakerphone' when linked to Bluetooth phones supporting Headset or Handsfree profiles. Uniquely designed to be portable and versatile, A1 will provide you with maximum comfort and satisfaction for all of your handsfree needs whether you use the device in car, outdoor or in office.
Product Functions & Features High Quality Wireless Handsfree Function Enhanced Echo & Noise Cancellation via DSP Engine Startup Detection Function – Automatic Bluetooth Connection Dual (Car and Indoor) Application – Automatic Mode Switching Automatic Invertible Display Function Charging & Firmware Upgrade via USB
What’s Included in the Package z z z z z Bluetooth Handsfree Kit (A1) Sun Visor Clip AC/DC Charger Adapter USB Cable User Manual Description of Parts Mute/Hold Speaker Volume Control Display Microphone USB Port MFB Power Switch Clipping the A1 onto Sun Visor z Mount the clip onto the back of A1 and slide the clip onto sun visor as shown below 클립을 끼우고 Sun Visor에 끼우는 모습 그림(그림9)
OLED Display Hold Indicator Bluetooth Battery Indicator Connection Mode Indicator Status Buttons locked Car Handsfree Mode : Optimum voice quality when mounted onto sun visor.
Charging the Battery z If battery level is low, battery level indicator icon will be displayed as empty. z To charge the battery, connect the handsfree kit to AC/DC power adapter or PC using the USB Cable. z During charging, the battery level indicator will flash with the text ‘Charging’ displayed in static motion. Charging… z When charged, the text ‘Charged’ will be displayed in flashing motion. Charged Switching the A1 ON/OFF z To switch on A1, slide the power switch to O.
Echo & Noise Cancellation z DSP(Digital Signal Processor) integrated A1 eliminates echo and noise thereby providing clear voice quality even under harsh environmental conditions. z If A1 is used as ‘Car Handsfree’ mode in car, it eliminates surrounding noise (engine noise, wind noise, surrounding noise, radio sound etc.) and delivers clear voice to the other party. Also, it eliminates echo signals created by transmission of car speaker sounds to the microphone.
Pairing and Connecting A1 with Bluetooth Devices Function Action / Tone Indicator Display Wait for Pairing Pairing Mode To put A1 in pairing mode, while pressing MFB, slide Power Switch from x to o. Keep pressing the MFB until you see ‘Wait for Pairing’, sonorix A1 and Bluetooth Device Address. A1 is now ready to be paired. Pairing mode lasts for 3 minutes, after this period A1 returns to standby mode. From a Bluetooth phone or PC, search for sonorix A1.
Using A1 for Handsfree Operations Function Action / Tone Indicator Answer Call On an incoming call, ‘Ringing’ and ‘Caller ID’ will be displayed alternately. If Caller ID function is not supported by phone, then only ‘Ringing…’ will be displayed. To answer call, short click MFB. Make Call To make a call, first dial from phone and short click MFB to switch call to A1. Note : Some phones allow direct call transfer without having to press MFB.
Function Action / Tone Indicator Microphone Mute For privacy reasons, if you don’t want the party on the other line to hear your voice, you can mute the microphone by long clicking MUTE/HOLD button. To cancel mute function, long click MUTE/HOLD button. Mic. Muted Call Transfer To transfer calls from A1 to phone and vice versa, short click MFB during talk mode. Call Transferred During talk mode, if you receive another call, short click MUTE/HOLD button to hold st nd the 1 call and answer 2 call.
Specifications Standards RF Frequency Range Profiles Supported Transmission Power Distance Audio Output Bluetooth Specification V1.2 2402 ~ 2480 MHz Headset, Handsfree 0.25 ~ 2.5mW (Class 2) 10m (in open space) > 1W Standby > 400 hrs Continuous Talk Time > 15 hrs < 3 hrs DC +5V (USB) AC 90~250V Power On/Off, Multi-Function Button, Mute Button, Volume Up/Down 128 X 32 dots OLED (white) 63g -10 ~ +50°C, Rel.