1
3 3 CONTENTS Introduction 4 Product Functions & Features 4 What’s included in the Package 4 Description of Parts 5 Clipping the A1 onto Sun Visor 5 OLED Display 5 Charging the Battery 6 Switching the A1 ON/OFF 6 Echo & Noise Cancellation 7 Pairing and Connecting A1 with Bluetooth Devices 8 Using A1 for Handsfree Operations 9 Audio Tuning A1 with My Cell Phone 11 Specifications 12 Safety Instructions z z z z z z z z z Check the laws and regulations on the use of mobile phones an
4 Introduction The sonorix Bluetooth Handsfree Kit A1 is a state-of-the-art device for handsfree operations at its best. It functions as 'Car Handsfree Kit' or 'Portable Speakerphone' when linked to Bluetooth phones supporting Headset or Handsfree profiles. Uniquely designed to be portable and versatile, A1 provides you with maximum comfort and satisfaction for all of your handsfree needs whether you use the device in car, outdoor or in office. We hope you enjoy the unique features provided by sonorix.
5 5 Description of Parts Mute/Hold Speaker Volume Control Display Microphone USB Port (only charging) MFB Power Switch Clipping the A1 onto Sun Visor z Mount the clip onto the back of A1 and slide the clip onto sun visor as shown below. OLED Display Bluetooth Connection Status Mode Indicator Hold Indicator Buttons locked Buttons unlocked Battery Indicator Car Handsfree Mode: Optimum voice quality when mounted onto sun visor. Speakerphone Mode: Optimum voice quality when placed upright.
6 Automatic Mode Switching & Invertible Display Function A1 is equipped with ‘Automatic Mode Switching’ as well as ‘Automatic Invertible OLED’ functions. ‘Automatic Mode Switching’ sets the best talk environment for user depending on where the A1 is used. If A1 is clipped onto sun visor, it automatically enters into ‘Car Handsfree’ mode and when placed on table, it enters into ‘Speakerphone’ mode.
7 Echo & Noise Cancellation z DSP(Digital Signal Processor) integrated in A1 eliminates echo and noise thereby providing clear voice quality even under harsh environmental conditions. z If A1 is used as ‘Car Handsfree’ mode in car, it eliminates surrounding noise (engine noise, wind noise, surrounding noise, radio sound etc.) and delivers clear voice to the other party. Also, it eliminates echo signals created by transmission of car speaker sounds to the microphone.
8 Pairing and Connecting A1 with Bluetooth Devices Function Action Pairing Mode To put A1 in pairing mode, while pressing MFB, slide Power Switch from x to o. Keep pressing until you see ‘Wait for Pairing’, sonorix A1 and Bluetooth Device Address. A1 is now ready to be paired. Pairing mode lasts for 3 minutes, after this period A1 returns to standby mode. Note : A1 can be paired with up to 3 devices. To delete all pairing information, long click MFB while A1 is in pairing mode.
9 9 Using A1 for Handsfree Operations Function Action Display On an incoming call, ‘Ringing’ and ‘Caller ID’ will be displayed alternately. If Caller ID function is not by phone, then only ‘Ringing…’ will be Answer Call supported displayed. If your phone supports Caller Name Display, only the caller name will be displayed. To answer call, short click MFB. 0315966400 Make Call To make a call, first dial from phone and call will be automatically transferred to A1.
10 Function Action 3 Way Call During talk mode, if you receive another call, long click MFB to hold the 1st call and answer 2nd call. To toggle between calls, long click MFB. During talk mode, by short clicking MFB, you can end the current call to continue with the next call. Note : 3 Way Call function is only applicable if user has subscribed for such service.
11 Audio Tuning A1 with My Cell Phone z As mobile phones have varying speaker and microphone level settings which affect the handsfree quality in the form of echoes, too low or loud sounds etc. when used with A1, if you encounter such problems, you can calibrate the speaker and microphone settings of your A1 device. z To be able to adjust the microphone setting, A1 has to be in talk mode. During talk mode long click [+] or [-] button. Followed by a beep tone, the following icon will then be displayed.
12 Specifications Standards RF Frequency Range Profiles Supported Transmission Power Distance Audio Output Battery Life Charging Time Charging Voltage Buttons Display Weight Operating Temp. & Humidity Certification Bluetooth Specification V2.0 2402 ~ 2480 MHz Headset, Handsfree 0.25 ~ 2.5mW (Class 2) 10m (in open space) > 1W Standby > 400 hrs Continuous Talk Time > 15 hrs < 3 hrs DC +5V Power On/Off, Multi-Function Button, Mute Button, Volume Up/Down 128 X 32 dots OLED (white) 87.
13 13 * * * * * * * * * Product Warranty OpenBrain Technologies warrants this product against all defects in material and workmanship for a period of one year from the date of purchase by end user. The conditions for warranty are as follows : The warranty is valid only if the original receipt issued to the original purchaser by the dealer is presented with the product to be repaired or replaced. The warranty is void if the serial number, date of purchase and product label had been removed.
