Owner’s Manual Bluetooth Helmet Headset SALUT 1
1. Headset Buttons M: 1.Play/Pause [cell phone music] 2. Redial last phone number 3. Cell phone voice dials A: Select to Intercom with A1/A2/A3 V+: 1. Next track [cell phone music] 2. Volume up V-: 1. Previous track [cell phone music] 2.
2. Recharge 1. Use Mini USB cable to recharge. During recharging, LED stays red. When charged, LED stays blue. Headset battery is initially partially charged. Please fully recharge the headset before the first use. 2. Low battery warning: When battery is low, 3 can be heard (i.e., ) is heard to remind the user to recharge.
3. Power ON/OFF 1. Power ON: Press both A and V- buttons simultaneously until LED stays blue and 2. release both button. Power OFF: Press A and V- buttons simultaneously unit the LED stays red. A voice notification can be heard to inform you the remaining battery capacity.
4. Pair with Cell Phone and Use Pair with Cell Phone 1. Turn on SALUT, press M until the LED flashes red/blue alternatingly. 2. Ice name: SALUT, and connect. Activate cell phone Bluetooth. Search for 3. device SALUT and connect. When asked for password, input <0000> (4 zeros). After connection, a voice notification is heard, and the LED flashes blue slowly to indicate successful pairing. Use Cell Phone 1. Press M to answer incoming call. 2.
9. When connected to two cell phones if the second cell phone has an incoming call during the first cell phone talk, press A to answer the incoming call on the second cell phone and hold the first cell phone. When the call on the second phone ends, the headset will resume the first cell phone. 10. Set Auto-Answer: Hold both M and V+ for 8 seconds. A voice notification can be heard to indicate successful setting. 11. |
5. Pair with Headset for Intercom and Use Two SALUT headsets must be paired for 1-on-1 intercom.Each SALUT can connect to 3 (at most) other SALUT headsets for 1-on-1 intercom. The three SALUT headsets will be defined, according to the reverse time order they were paired, as: (i.e., the most recently paired has the highest priority) first priority: “Comm A1”, second priority: “Comm A2”, and third priority: “Comm A3” 。 Pair with headset 1.
Press [A] once to start 1-on-1 intercom with A1; press [A] twice to start 1-on-1 intercom with A2; and press [A] three times to start 1-on-1 intercom with A3. Manually Ending 1-on-1 Intercom During 1-on-1 intercom, any of the tow headsets can press [A] once to end the intercom. VOX Mode SALUT provides four sensitivity levels for VOX to start 1-on-1 intercom to accommodate for different speeds and ambient noise levels.
Level 5 is also the manual mode: VOX Level Control: 1. Turn SALUT headset on (i.e., ready to connect) without transmitting any voice signals (i.e., turn off cell phone music playback and FM, and stay silent for 15 seconds to leave the intercom mode). 2. Press [P] upward or downward for 2 seconds to adjust and then release [V]. Different voice notifications will be provided to indicate the transition from a level to a different level.
The headsets already paired for 1-on-1 intercom can use [A] to select intercom During 1-on-1 intercom, any of the two headsets can press [A] once to end the intercom. VOX Level Control: 3. Turn SALUT headset on (i.e., ready to connect) without transmitting any voice signals (i.e., turn off cell phone music playback, and stay silent for 15 seconds to leave the intercom mode). 4. Press [V+] or [V-] twice to raise or lower the voice level.
is restored. 6. Group Intercom Pairing and Usage SALUT provides up to 4 SALUT headsets for group intercom. Pairing for Group Intercom 1. Assign a number to each headset (1, 2, 3, 4) a. Enter Group Member Setting Mode: In ON state, press [V+] until LED stays blue. b. Assign a number to headset: According to the number assigned, press [V+] rapidly. For example: To assign 1 to SALUT headset (called SALUT#1), press [V+] once. At this point, LED flashes blue once and voice notification “Group Member 1”.
c. Exit Group Member Setting Mode: After assigning a number of each SALUT headset, press [V-] on each headset. The LED flashes blue to indicate exiting the setting mode. d. Check the current headset number: In ready state, press [V-] for 6 seconds and a voice notification will announce the current assigned number. 2.Pairing between SALUT#1 and SALUT#2: Note:The distance between two headsets must be less than 2 meters. SALUT#1: in ON state, press [V-] until LED flashes red rapidly.
3. Pairing between SALUT#2 and SALUT#3 (Refer to: a. Pairing between SALUT#1 and SALUT#2) 4. Pairing between SALUT#3 and SALUT#4 (Refer to: a. Pairing between SALUT#1 and SALUT#2) 6.1 Group Intercom Usage After completing pairing for group intercom, press[V-] for 2 seconds and release on any member headset will automatically start group intercom among the four headsets. 6.2 Leave group intercom: During group intercom, any headset can press [A] to leave the group intercom.
FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.