User's Manual

FCC STATEMENT
Penguin
ENT Scope
Operation
For detailed warranty information,Please visit
www.opcom.com
1. Download App
2. Paring Device to Mobile Device :
3. Live View :
4. Remark :
Android: Go to Google play download “OPCOM Care” App.
iOS: Go to App store download “OPCOM Care” App.
To download mobile application to your Mobile device:
OPCOM Care unit to Mobile Device:
Turn on Wi-Fi on your mobile device, connect to
Penguin_xxxxxxxxxxxx from the Wi-Fi list.
(Option)USB On To Go ( OTG ) Mode :
Plug micro USB into micro USB port at the bottom
of OPCOM Care Unit.
Plug another head of micro USB into
OPCOM Care System Tablet.
Open application from your Mobile or
OPCOM Care System Tablet.
Mobile / Application User’s Manual available at:
www.opcom.com
APP
Microview
Scope 60
3.6mm
Camera Head
USB OTG
Care
10.6’ Tablet
USB OTG
CL480PQuick Guide
OPCOM Penguin
A personal health scope to check yours and your loved ones ears,
nose,eyes, skin and, hair.With its built-in mini 310K Pixels camera in
the 3.6mm head, pictures and videos can be captured for real-time
viewing, or video that can be stored in your personal files and
forwarded to a medical professional for review and diagnosis.
Easy to use on small children and infants or pets….
1
2
6
7
3
4
5
Side ViewFront View
8
(Option) Link To Tablet
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
1. EndoCam Camera
2. Snapshot button
3. Brightness button
Quickly press button and release it
to increase / decrease light.
5. Power ON/OFF
Button
Press 3 second to power ON.
Press 1 second to power OFF.
6.
EndoCam
Camera Head
7. Battery
8. USB Cable
Press button to capture image.
Press button for 1 second to take
a snapshot picture.
Hold button down for 2-3 seconds to start
video recording.
Camera and LED light module.
Location where rechargeable battery is
placed into the unit.
310K Pixels camera.
9.
Charge
Support operating time up to 2.5 hours
per each full charge.
Micro USB port at the bottom of the unit.
4. LED Indicator
Non-connection with USB cable
Connection with USB cable
• Power on :Blinking 45sec. to access into Wi-Fi Mode
• Power off :Blink 5sec. access out Wi-Fi Mode
• Sanpshot
• Recording
• Stop recording :Stop blinking & back to on
Fully Charge (keep charging 1-2 hrs.)
Low Battery : Blinking continually & need
recharge immediately
Camera in poor-connection :
Blinling alternatively (Press power-off & restart again)
Charging
:Blink once
:Blinking continually