® OONO CZH-LABS.com 4 SPDT 10Amp Power Relay Module Model: F-1002 Series, Ver: 1.
Feature: 4 Channel SPDT(Single Pole Double Throw) 10Amp power relays. It can be easily connect with Raspberry Pi or Arduino, or other IoT projects, or home automation control application. Darlington transistor circuits drive relay coil. LED indicators for power supply and each relay action. ABS plastic enclosure, you can use screw mount to wood board or wall, of course, can also be placed on the desktop. High quality screw terminal block. Pitch 5.0mm/0.197". Wire range 26AWG ~ 12AWG / 2.5mm square.
Terminal Connect: DC IN: Operating power supply input (V+). GND: Operating power supply 0V(ground) and Control signal input 0V(ground). IN-x: Control signals input. NOx: Relay switch normally open terminal. NCx: Relay switch normally close terminal. Cx: Relay switch common terminal. Terminal Block: Pitch 5.0mm/0.197" screw terminal block. Wire range 24AWG ~ 12AWG / 2.5mm square. Strip length 7mm. Screws - M2.5,steel,Cr3+ Zn plated. Pin header and Cage - Brass. lisheng@chunzehui.
Schematic:
Dimensions:
