Specifications

ManualsBrandsOnset Computer ManualsElectronicsInTemp Temp/RH Logger

InTemp® CX450 Temp/RH Logger Manual

25186-3

The InTemp CX450 logger measures temperature and relative humidity (RH) for storage and

transportation monitoring in the pharmaceutical, Life Science, medical, and food and beverage

industries. This Bluetooth® Low Energy-enabled logger is designed for wireless communication

with a mobile device. Using the InTemp app, you can easily configure the logger, download

reports, and monitor tripped alarms. Or, you can use InTempConnect® to configure and

download the logger via the CX5000 Gateway. Use the built-in LCD screen on the logger to view

the current temperature and humidity, logging status and battery usage, and also to check and

clear maximum and minimum readings. Once data is uploaded to InTempConnect, you can

track logger configurations and automatically upload logger data to build custom reports for

further analysis.

Specifications

Temperature

Sensor

Range

-30° to 70°C (-22° to 158°F)

Accuracy

±0.5°C from -30° to 70°C (±0.9°F from -22° to 158°F)

Resolution

0.024°C at 25°C (0.04°F at 77°F)

Drift

<0.1°C (0.18°F) per year

RH Sensor

Range

0 to 95% (non-condensing)

Accuracy

±3% from 0% to 90% and ±3.5% from greater than 90% typical at 25°C

(77°F)

Resolution

0.01%

Drift

<1% per year typical

Logger

Radio Power

1 mW (0 dBm)

Transmission Range

Approximately 30.5 m (100 ft) line-of-sight

Wireless Data Standard

Bluetooth Low Energy (Bluetooth Smart)

Logger Operating Range

-30° to 70°C (-22° to 158°F), 0 to 95% RH (non-condensing)

NIST Calibration

Two-point NIST calibration included

Logging Rate

1 second to 18 hours

Time Accuracy

±1 minute per month at 25°C (77°F)

Battery Type

Two AAA 1.5 V alkaline or lithium batteries, user replaceable

Battery Life

1 year, typical with logging interval of 1 minute. Faster logging intervals,

remaining connected with the InTemp app, excessive report generation,

numerous audible alarms, and paging all impact battery life.

Memory

178 KB (103,400 total measurements or 51,700 temp & RH paired

measurements)

Full Memory Download

Time

Approximately 60 seconds; may take longer the farther the device is

from the logger

LCD

LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or

go blank in temperatures outside this range

Dimensions

9.4 x 5.6 x 2.59 cm (3.7 x 2.21 x 1.02 inches)

Weight

90.2 g (3.18 oz)

Environmental Rating

IP54

The CE Marking identifies this product as complying with all relevant

directives in the European Union (EU).

See last page

InTemp CX450 Temp/RH

Logger

Included Items:

• Two AAA 1.5 V alkaline

batteries

• Battery door and screw

• NIST Certificate of Calibration

Required Items:

• InTemp app

• Device with iOS and Bluetooth

Summary of content (6 pages)

PAGE 1
InTemp® CX450 Temp/RH Logger Manual The InTemp CX450 logger measures temperature and relative humidity (RH) for storage and transportation monitoring in the pharmaceutical, Life Science, medical, and food and beverage industries. This Bluetooth® Low Energy-enabled logger is designed for wireless communication with a mobile device. Using the InTemp app, you can easily configure the logger, download reports, and monitor tripped alarms.
PAGE 2
InTemp CX450 Temperature/RH Logger Manual Logger Components and Operation Alarm LED illuminated on the LCD screen followed by a table with descriptions of each symbol. LCD Audible alarm speaker Start button Sensor Housing Mute or Next button LCD Symbol Description Logger Front View An alarm has tripped because the sensor reading is outside the specified range. See Logger Alarms. This indicates how much memory has been used for the current configuration.
PAGE 3
InTemp CX450 Temperature/RH Logger Manual LCD Symbol DO NOT check the box that says “I am an InTempConnect user” when signing in. Description This is displayed while pressing the top button for 3 seconds to start the logger or when pressing both buttons for 3 seconds to clear the minimum and maximum values on the LCD. 4. Set up a logger profile. InTempConnect users (requires privileges): a. In InTempConnect, select Loggers > Logger Profiles. b. Click Add Logger Profile. c. Type a profile name. d.
PAGE 4
InTemp CX450 Temperature/RH Logger Manual as well as the minimum and maximum values for both (see Minimum and Maximum Values for more details). or users with the required privileges can also view the passkey from the device configuration page in InTempConnect and share them if needed. See www.intempconnect.com/help for more details. You can also use the CX5000 Gateway to automatically configure and download loggers. See www.intempconnect.com/help for details.
PAGE 5
InTemp CX450 Temperature/RH Logger Manual PDF and XLSX formats for sharing at a later time. Tap the Reports icon to access previously downloaded reports. See www.intempconnect.com/help for details on working with reports in both the app and InTempConnect. Logger Events The logger records the following events to track logger operation and status. These events are listed in reports downloaded from the logger.
PAGE 6
InTemp CX450 Temperature/RH Logger Manual Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.