User's Manual

ManualsBrandsOnset Computer ManualsElectronicsTemperature Logger

InTemp® CX500 Series Temperature Logger

(CX501, CX502, CX503) Manual

19998-5

InTemp CX500 series loggers measure temperature in transportation monitoring applications.

These Bluetooth® Low Energy-enabled loggers are designed for wireless communication with a

mobile device and can be configured to monitor temperatures in Cold Chain, CRT, and Frozen

shipments. Using the InTemp app, you can easily configure the logger with one of three preset

configurations or you can set up a custom configuration for other applications. The logger has a

built-in alarm to alert you to excursions. Logger reports can be quickly downloaded to your phone

or tablet and automatically uploaded to your InTempConnect account, where you can analyze and

export data as needed. The logger is available in a single-use 15- or 90-day model (CX501 and

CX502) or a multiple-use 365-day model (CX503).

Specifications

Temperature Sensor

CX501 CX502 CX503

Sensor

Range

-10° to 70°C (14° to

158°F)

-30° to 70°C (-22° to

158°F)

-30° to 70°C (-22° to

158°F)

Accuracy

±0.5°C from -10° to

70°C (±0.9°F from 14°

to 158°F)

±0.5°C from -30° to

70°C (±0.9°F from

-22° to 158°F)

±0.5°C from -30° to

70°C (±0.9°F from

-22° to 158°F)

Resolution

0.04°C (0.072°F)

Drift

<0.01°C (0.018°F) per year

Response Time

5 minutes typical to

90% in open air

moving 1 m/s,

unmounted

6 minutes typical to

90% in open air

moving 1 m/s,

unmounted

6 minutes typical to

90% in open air

moving 1 m/s,

unmounted

Logger

Logger Operating Range

-10° to 70°C (-14° to

158°F)

-30° to 70°C (-22° to

158°F)

-30° to 70°C (-22° to

158°F)

Radio Power

1 mW (0 dBm)

Transmission Range

Approximately 30.5 m (100 ft) line-of-sight

Wireless Data Standard

Bluetooth Low Energy (Bluetooth Smart)

Type

Single use Single use Multiple Use

Duration

15 days 90 days Up to 1 year

Shelf Life

Up to 1 year

Logging Rate

1 second to 18 hours

Time Accuracy

±1 minute per month at 25°C (77°F)

Battery

CR2032 (CX501) or CR2450 (CX502 and CX503) 3V lithium, not

replaceable. Battery for CX501 and CX502 lasts for duration specified

when logger is used within the 1-year shelf life. Battery life for the

CX503 model is 1 year, typical with logging interval of 1 minute. Faster

logging intervals, remaining connected with the InTemp app, excessive

downloads, and paging may impact battery life.

Memory

8,800 measurements 14,000 measurements 14,000 measurements

Full Memory

Download Time

Approximately 60 seconds; may take longer the farther the device is

from the logger

Dimensions

6.9 x 4.5 x 1.1 cm (2.71 x 1.76 x 0.42 inches)

Weight

22.1 g (0.78 oz) 25.5 g (0.90 oz) 25.5 g (0.90 oz)

Environmental Rating

IP67

The CE Marking identifies this product as complying with all relevant

directives in the European Union (EU).

See last page

InTemp CX 500 Series

Loggers

Models:

• CX501, 15-day logger,

single use

• CX502, 90-day logger,

single use

• CX503, 365-day logger,

multiple use

Required Items:

• InTemp app

• Device with iOS and

Bluetooth

Summary of content (4 pages)

PAGE 1
InTemp® CX500 Series Temperature Logger (CX501, CX502, CX503) Manual InTemp CX500 series loggers measure temperature in transportation monitoring applications. These Bluetooth® Low Energy-enabled loggers are designed for wireless communication with a mobile device and can be configured to monitor temperatures in Cold Chain, CRT, and Frozen shipments.
PAGE 2
InTemp CX500 Series Temperature Logger Manual Logger Components and Operation Mounting Loop 3. New users will receive an email to activate their user accounts. 4. Download the InTemp app from the App Store®. Duration (CX503 model shown) 5. Open the app and enable Bluetooth in the device settings if prompted. Alarm LED 6. Log in with your InTempConnect user credentials. Status LED 7. Configure the logger as described in the next section.
PAGE 3
InTemp CX500 Series Temperature Logger Manual logger. Note: To set up a custom configuration, tap the Settings icon and tap CX500 Logger Configurations. to enter the passkey. To reset a passkey, connect to the logger, tap Set Logger Passkey, and select Reset to Factory Default. 4. Deploy the logger to the location where you will be monitoring the temperature.
PAGE 4
InTemp CX500 Series Temperature Logger Manual Protecting the Logger Note: Static electricity may cause the logger to stop logging. The logger has been tested to 8 KV, but avoid electrostatic discharge by grounding yourself to protect the logger. For more information, search for “static discharge” on onsetcomp.com. Battery Information The logger uses one CR2032 (CX501) or CR2450 (CX502 and CX503) non-replaceable lithium battery. Battery life is not guaranteed past the 1-year logger shelf life.