User's Manual
**Thick protective case ≥ 5mm or a case includes
magnet or metallic material, may not allow proper
charging function.
99.10 mm
139.61 mm
Wireless Charging Pad
Input
Wireless pad output
USB A output
WIABLK100007907
5V/2.4A
5W
5W
Dimension 160mm*86mm*102mm
Compatibility
1.Qi-enabled devices charge up to 5W on the pad
2.Any Qi-compatible smartphones or devices
3.Apple watch series 1, series 2, series 3, series 4, series 5.
Power Barrel
Connecting Port
USB Port
*Apple Watch charger sold separately.
** Additional ring is not included.
Put the Apple Watch
charger through the
ring of the charging
stand.
Power Barrel Connector
Power Barrel Connecting Port
How to charge your devices.
November 25, 2019_V1
Connect Apple Watch charger to the charging stand.
PRODUCT GUIDE
Caution
Avoid dropping
Do not disassemble
No metal objects between devices and wireless
charging stand
Thick protective case ≥ 5mm or a case includes magnet
or metallic material, may not allow proper charging
function.
Keep wireless charging stand away from any liquids or
moisture
The maximum ambient temperature during use of this
product must not exceed 45°C. Do not place device in
fire or other excessively hot environments.
Only use dry cloth or brush to clean this product.
Do not use if visible defects are observed on the
wireless charging stand.
Warning
Any changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate this equipment.
FCC Statements
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received
including interference that may cause undesired
operation
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and
receiver
Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected
Consult the dealer or an experienced radio/TV
technician for help
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator and your
body. This transmitter must not be co-located or
operating in conjunction with any other antenna or
transmitter.
November 25, 2019_V1
Place your smartphone or any Qi-enabled device on
the center of the charging pad, make sure to cover .
①. 5W Qi Wireless
Charging Pad with Apple
Watch Charging Stand
②. A 12W AC adapter
with 5-ft Cable
③. Additional ring for
Apple Watch Charger
④User Manual
① ③
②
What is in the box?
Get to know your 5W Qi Wireless Charging Pad with
Apple Watch Charging Stand
LED status indicator
LED Indicator
Blue light on for 3 seconds
O
Blue light on continuously
Blue light (flashing)
Status
Connected to power
Stand by for charging
Charging device
Foreign object detected
(Remove it before charging)
Begin to charge
12W AC adapter Power outlet
on wall
LED indicator will be on continuously during charging.
5W Qi Wireless Charging Pad
with Apple Watch Charging Stand
Model: WIABLK100007907
Need help?
We’re here for you every day from 7 a.m. – 9 p.m. CST.
Give us a call at 1-888-516-2630
If there is any foreign object detected, LED
indicator will be flashing.
Remove any foreign object (if any)
Example: Magnet or holder
*Allow charging any Qi-enabled device and Apple
Watch at the same time
** Apple Watch charger is not included
We ‘d love to hear from you.
Scan with your Walmart
app and let us know what
you think.
Connect 12W AC Adapter with Charging Pad
Insert power barrel connector to the connecting port
of the charging pad
Connect to Power Supply
Plug in 12W AC adapter into power outlet for power
supply
Do not place any credit card on the charging device.
6 811 31 357 72 2
④
Ring on the charging stand
cab be removed and
replaced with another ring
for dierent size of Apple
Watch.
Option A
Option B
Insert USB connector of
Apple Watch charger to
the built-in USB A port.