SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 1 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Basic Manual Hookup Step1: Speaker Layout ............................................................3 Step2: Connect the Speakers ..................................................9 Step3: Connect the TV ..........................................................11 Step4: Connect the AV Components .....................................13 Step5: Multi-zone Connection .......
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 2 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names What's in the box 1. Main unit 2. Remote controller (RC-926R) ×1, Batteries (AA/R6) ×2 3. Indoor FM antenna ×1 4. AM loop antenna ×1 5. Speaker setup microphone ×1 6. Power cord ×1 Glossary Dolby Atmos This unit supports playback in the Dolby Atmos format which provides 360e sound placement.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 3 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Step1: Speaker Layout 7.1-Channel System *1 *2 *3 Front speakers output front stereo sound and a center speaker outputs center sound such as dialogs and vocals. Surround speakers create back sound field. Powered subwoofer reproduces bass sounds and creates rich sound field.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 4 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Height Speakers; Front High Speakers/ Rear High Speakers These are types of height speakers. Furthermore, by installing height speakers, you can select the Dolby Atmos listening mode, which realizes the most up-to-date 3D sound including overhead sounds, when the input format is Dolby Atmos. Front high speakers or rear high speakers should be situated at least 0.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 5 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Height Speakers; Ceiling Speakers *3 *2 *1 These are types of height speakers. Furthermore, by installing height speakers, you can select the Dolby Atmos listening mode, which realizes the most up-to-date 3D sound including overhead sounds, when the input format is Dolby Atmos.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 6 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Height Speakers; Dolby Enabled Speakers (Dolby Speakers) *1 *2 These are types of height speakers. Dolby enabled speakers are special speakers designed to face the ceiling so that sound is heard after bouncing off the ceiling so that sound appears to be coming from overhead.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 7 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Bi-Amping the Speakers It is possible to connect front speakers supporting BiAmping to improve quality of the bass and treble. The effects and placements for speakers are the same as for a system that doesn't use Bi-Amping speakers.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 8 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Speaker combinations In any of the combinations, up to two powered subwoofers can be connected. Speaker Channels FRONT CENTER SURROUND SURROUND BACK HEIGHT 1 HEIGHT 2 Bi-AMP * 1 ZONE 2 * 1 (ÄP18) ZONE 3 * 1 (ÄP19) 2.1 ch 3.1 ch 4.1 ch 5.1 ch *2 6.1 ch *2 7.1 ch 2.1.2 ch *3 *4 3.1.2 ch *3 *4 4.1.2 ch *3 *4 5.1.2 ch *3 *4 6.1.2 ch *5 7.1.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 9 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Step2: Connect the Speakers Standard Connections Refer to the illustration to connect the speaker system. 2 * Depending on the combination of speakers, you may need to connect to other jacks. See "Points to note with speaker combinations" (ÄP8) for details.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 10 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Connections with BiAmping speakers Connect front speakers compatible with Bi-Amping connection to the FRONT jacks and the HEIGHT 1 jacks. Make sure you remove the jumper bar fitted between the woofer jacks and tweeter jacks of the front speakers. In case of Bi-Amping connection, refer to the instruction manual of your speakers.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 11 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Step3: Connect the TV TV-1 (ARC TV) This describes the connections for a TV that supports the ARC (Audio Return Channel) feature. By connecting with a single HDMI cable, you can not only output the video input to this unit to the TV, but you can also play the sound from the TV through this unit. Choose an HDMI IN jack on the TV that supports ARC when connecting.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 12 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names TV-2 (Non-ARC TV) This describes the connections for a TV that does not support the ARC (Audio Return Channel) feature. By connecting with both an HDMI cable and a digital optical cable, you can not only output the video input to this unit to the TV, but you can also play the sound from the TV through this unit.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 13 ページ 2017年10月26日 木曜日 > Hookup 午前10時47分 > Setup > Playback > Part Names Step4: Connect the AV Components HDMI AV Components This is an example of connection with an AV component that has an HDMI jack.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 14 ページ 2017年10月26日 木曜日 > Hookup 午前10時47分 > Setup > Playback > Part Names Non-HDMI AV Components 1 3 BD/DVD 14 1 Component video cable, 2 Digital coaxial cable, 3 Analog audio cable OR 2 This is an example of connection with an AV component that does not have an HDMI jack. Make the connections to the AV component to match the jacks it has.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 15 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Audio Components Example of a connection with an Audio Component. Connect a CD player using a digital optical cable or analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack. 0 If the turntable has a built-in audio equalizer, connect it to an AUDIO IN jack other than the PHONO jack.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 16 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Component Video Monitor Use a component video cable to connect a TV or projector that has component video input jacks rather than an HDMI input jack. To output video from the COMPONENT VIDEO OUT jacks, you must connect the external AV components using a component video cable. 1 BD/DVD Projector, etc.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 17 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Step5: Multi-zone Connection ZONE 2 TV You can enjoy content from a Blu-ray Disc player on a TV equipped with an HDMI input jack in the separate room (ZONE 2) by playing a Blu-ray Disc player in the main room (where this unit is located), or play the content from another AV component.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 18 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names ZONE 2 PRE/LINE OUT / ZONE 2 SPEAKER You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2). Connections with an AV component Connect with HDMI IN 1 to 5 if you want to output an external AV component to ZONE 2.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 19 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names ZONE 3 PRE/LINE OUT / ZONE 3 SPEAKER Along with the main room and ZONE 2, you can also enjoy audio in yet another room (ZONE 3). Connections with an AV component To output the audio of an external AV component to ZONE 3, connect using an analog audio cable. Output to ZONE 3 is not possible when you connect with an HDMI cable or digital optical/coaxial cable.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 20 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Step6: Connect Other Cables (North American models) Antenna Hookup Move the antenna around while playing the radio to find the position with the best reception. Use a thumb tack or similar to attach the indoor FM antenna to a wall. (European and Asian models) Network Hookup Connect this unit to the network using wired LAN or Wi-Fi (wireless LAN).
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 21 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Step7: Power On & Initial Setup 1. AccuEQ Room Calibration Place the supplied speaker setup microphone in the listening position, measure the test tones emitted by the speakers, then the unit automatically sets the optimum volume level for each speaker, the crossover frequencies, and the distance from the listening position.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 22 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names HDMI Setup 2. Source Connection Check that each input source is connected correctly. Follow the guidance, select the input you want to confirm, start play of the selected player, and confirm that the images appear on the TV and that sound is played. 3. Network Connection Set up Wi-Fi connection with an access point such as a wireless LAN router.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 23 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Basic Playback AV Component Playback a b e d c 1. Switch the input on the TV to that assigned to the unit. 2. Press the input selector (a) on the remote controller with the same name as the jack to which you connected the player to switch the input. For example, press BD/DVD to play the player connected to the BD/DVD jack. Press TV to listen the TV's sound.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 24 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Network Functions Network Services 1. Switch the input on the TV to that assigned to the unit. 2. Press NET to display the network service list screen. a b 3. Select the item with the cursors of the remote controller and press ENTER to confirm your selection (a). To return to the previous screen, press (b).
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 25 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback AirPlay BLUETOOTH® Playback You can wirelessly enjoy the music files on an iPhone®, iPod touch®, or iPad® connected to the same access point as this unit. 0 Update the OS version on your iOS device to the latest version. 1. Connect the iOS device to the access point. 2. Press NET. 3.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 26 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Others Listening To the Radio c a 1. Press TUNER (a) on the remote controller repeatedly to select either "AM" or "FM" on the display. 2. Press MODE (c) on the remote controller, so that the "TunMode: Auto" is displayed on the display. 3.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 27 ページ 2017年10月26日 木曜日 > Hookup separate room or the ZONE Speaker, adjust with VOL+/– on the remote controller. To control on the main unit, press ZONE 2 or ZONE 3 and adjust with the MASTER VOLUME control within 8 seconds. 0 The information for a connected device can be displayed on the TV screen in a separate room. Press the button while the remote controller is in the mode for controlling ZONE 2.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 28 ページ 2017年10月26日 木曜日 > Hookup > Playback > Part Names When the unit is operating erratically When the subwoofer produces no sound Try restarting the unit Restarting the unit may help it operate more smoothly. To restart the unit, turn it to standby, and then press Í ON/ STANDBY on the main unit for at least 5 seconds. (The unit’s settings will be maintained.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 29 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Front Panel 1 2 3 4 5 6 7 8 11 9 10 11 1. Í ON/STANDBY button: Turns the unit on or into standby mode. 2. PURE AUDIO button/indicator: Switches the unit to Pure Audio mode. (ÄP23) 3.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 30 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Display Optimizer function that provides better sound quality for compressed audio. 15.HDMI OUT button: Allows you to select the HDMI OUT jack to output video signals from "MAIN", "SUB", and "MAIN+SUB". 16.INFO button: Switches the information on the display. 17.SETUP button: Displays the Setup menu. 18.QUICK MENU button: You can perform common settings on the TV screen.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 31 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Rear Panel 1 2 3 4 5 6 7 8 9 10 11 12 11 13 14 15 16 1. COMPONENT VIDEO IN/OUT jacks: Transfer the video signals of an AV component with a component video cable. 2. ZONE 2/ZONE 3 PRE/LINE OUT jacks: Output audio signals with an analog audio cable to a pre-main amplifier or a power amplifier in a separate room (ZONE 2/ZONE 3). (ÄP18, 19) 3.
SN29402415B_TX-RZ1100_BAS_En_171026.book > Before start 32 ページ 2017年10月26日 木曜日 > Hookup > Setup 午前10時47分 > Playback > Part Names Remote Controller 1 2 14 15 16 17 18 3 4 19 5 6 20 7 8 21 9 10 22 11 12 13 32 23 1. Í ON/STANDBY button: Turns the unit on or into standby mode. 2. Input selector buttons: Switches the input to be played. 3. CH S / T buttons: Adjust the volume level of the speaker. Press CH several times to select the speakers, then press S / T to adjust the level. 4.
SN29402415B_TX-RZ1100_BAS_En_171026.book 33 ページ 2017年10月26日 木曜日 午前10時47分 License and Trademark Information Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc.
SN29402415B_TX-RZ1100_BAS_En_171026.book 34 ページ 2017年10月26日 木曜日 “Alla andra varumärken tillhör deras respektive ägare.” ϥϳϳϧόϣϟ ΎϬΑΎΣλϷ ΔϛϭϠϣϣ ϯέΧϷ ΔϳέΎΟΗϟ ΕΎϣϼόϟ ϊϳϣΟ 34 午前10時47分 DISCLAIMER Through this device you are able to link to other services or websites which are not under the control of any company which has designed, manufactured or distributed/have distributed this device, and its affiliates (collectively, “Company”).
SN29402415B_TX-RZ1100_BAS_En_171026.
SN29402415B_TX-RZ1100_BAS_En_171026.book 36 ページ 2017年10月26日 木曜日 午前10時47分 1-10-5 Yokoami, Sumida-ku, Tokyo 130-0015 JAPAN http://www.onkyo.com/ 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. For Dealer, Service, Order and all other Business Inquiries: Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ For Product Support Team Only: 1-800-229-1687 http://www.us.onkyo.com/ Gutenbergstrasse 3, 82178 Puchheim, Germany Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 http://www.