User's Manual

Table of Contents AudioJets Quickstart Guide AudioJets Quickstart Guide
1. Introduction:
Welcome to the world of wireless with AudioJets
Bluetooth Headphones. This Quickstart guide will help
you familiarize yourself with your new headphones to
keep you moving with your busy life.
Safety Rules:
2. Kit Contents:
1. Introduction ............................................
2. Kit Contents ............................................
3. Connection Diagram ...........................
4. How to use .............................................
4.1 General Function .............................
4.2 Pairing to mobile phone .................
4.3 Charging your device ....................
5. Technical Specification ........................
6. Service and Support .............................
1
1
2
2
2
3
5
5
6
Please follow the rules depicted in this manual
closely to ensure your safety. Before using your
new AudioJets Headphones, we strongly
encourage you to read through this user manual.
Be cautious for any sharp edges, uneven surfaces,
metal parts, accessories or product packaging
that could cause potential harm or injury.
Do not attempt to modify, repair or dismantle
AudioJets Bluetooth Headphones in any manner.
Doing so will void the product warranty and may
result in fire, electrical shock, or permanent
damage to your headphones.
Do not use any volatile liquids to clean your
AudioJets Headphones.
Do not use AudioJets Headphones in any
potentially hazardous locations or environments.
1.
2.
3.
4.
5.
1x AudioJets Bluetooth Headphones
1x USB Charger
1x Quickstart Guide
AudioJets Quickstart Guide
AUDIOJETS BLUETOOTH HEADPHONES
QUICKSTART GUIDE
3. Connection Diagram
4. How to use:
4.1 General Functions:
Volume Up
Volume Down /
Transfer voice call
Turn On & Turn Off /
Enter pairing mode /
Play & Pause /
Answer and End Call /
Reject Call
Mic
Charging
Next
Next
Previous
Desired Result
Turn On
Press the “ ” button for 3 seconds when the
device is off. (A blue LED slowly flashes and
a tone will beep to indicate device is on)
While powered off, press the “ ”button
and hold for 6 seconds. (Blue and Red
LEDs will flash rapidly with two beeps)
In Pairing Mode, use a Bluetooth enabled
mobile phone or device to pair together.
See section 4.2 for detailed instructions.
Press “ ” to play when the device is
paused and press “ ” to pause when the
device is playing.
Press “+” to raise volume.
Enter Pairing
Mode
Required Action
Pairing
Play / Pause
Volume Up
Desired Result Required Action
Press “-” to raise volume.
Volume Down
Press “<” for previous track.
Previous
Press “>” for next track.
Next
A red LED will flash periodically with a
beep to indicate low battery.
Low Battery
Warning
Plug Micro USB into headphone, red LED
will indicate the device is charging.
Charging
Press the “ ” button for 1 second to
answer incoming phone calls.
Answer Call
Press the “ ” button for 3 seconds while
the device is on. (A series of tones and
red LED will flash to indicate device is off)
Turn Off
Press the “-” button for 2 seconds to
transfer the call between the mobile
device and headphones.
Transfer Voice
Call
Press the “ ” button for 1 second to end
phone call.
End Call
Press the “ ” button for 1 second to end
phone call.
End Call
4.2 Pairing to a mobile device or other device:
To use your AudioJets Bluetooth Headphones, you
must first pair your headphones with a Bluetooth
enabled device. Once your headphones are paired
to a specific Bluetooth enabled device, they will
remain paired and will automatically recognize each
other when they are within range.
Turn on your Bluetooth enabled phone and ensure its
Bluetooth funcion is activated.
Turn on your AudioJets Bluetooth Headphones to
pairing mode (see section 4.1 for instructions on
entering pairing mode).
Search for Bluetooth enabled devices on your phone
by following phone manufacturer’s instructions. Refer
to your phone manufacturer’s user manual for more
information.
After a few seconds, the phone will list the devices as
a recognized Bluetooth device. Select “AudioJets”
and follow your phone’s instructions to complete this
pairing.
Your phone may request a passkey or PIN, please
enter “0000” as your passkey or PIN.
FCC Warning:
15.19(a)(3)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
15.21
Changes or modifications not expressly approved by
the party responsible for compliance
could void the user's authority to operate the
equipment.
15.105(b)
NOTE: This equipment has been tested and found to
comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are
designed to provide reasonable protection against
harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio
frequency energy and, if not installed and used in
accordance with the
instructions, may cause harmful interference to radio
communications. However,
there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to
radio or television reception,
which can be determined by turning the equipment
off and on, the user is
encouraged to try to correct the interference by one
or more of the following
Pairing to a Bluetooth enabled phone:
Pairing to a computer or entertainment device:
a.
b.
c.
d.
e.
If your device is not Bluetooth enabled, a Bluetooth
adapter is necessary. Install adapter (not included)
with your computer or entertainment device and
ensure its Bluetooth function is activated.
Turn on device to enter pairing mode.
Open the Bluetooth software installed on your
computer or entertainment device and select option
to search for other Bluetooth enabled devices. Refer
to Bluetooth Software manufacturer’s user manual for
more information.
After a few moments “AudioJets” will be listed as a
discoverable device. Select “AudioJets” and
complete the pairing process.
a.
b.
c.
d.
4.3 Charging Your AudioJets:
To charge your AudioJets Bluetooth Headphones,
connect Micro USB charger to headphones and
connect universal USB to any USB enabled port or AC
charger. Ensure that your device is fully charged for at
least 6 hours before initial use. Red LED will stay lit while
charging. When charging is complete, LED will
change from Red to Blue.
5. Technical Specifications:
Warning:
Ensure that AC charger or USB enabled port(s)
are compatible with headphones (USB Type A /
USB Micro B).
Parameter Value
Bluetooth
Specification
2.1 +EDR
Frequency
Response
80 Hz - 20 KHz
Loudspeaker
Output
20mW
Bluetooth Profile
RF Range 10 m
Signal-to-Noise >90dB
Support A2DP1.2, AVRCP1.0,
HFP1.5, HSP1.0
Parameter Value
Distortion <1.0%
Playback Time 8 hours
Charging Time 2.5 hours
Weight 110g
Dimenstions
(L X W X H)
156.9 X 163.5 X 49mm
6. Service and Support:
If your device is not performing as it should be, please
contact Class & Culture by sending an email to
[e-mail]
7. Experience the ‘speed of sound’ on the go and
enjoy your busy lifestyle wire-free.
1 2 3 4 5 6
AudioJets Quickstart Guide AudioJets Quickstart Guide AudioJets Quickstart Guide
7
AudioJets Quickstart Guide
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment
and receiver.
-- Connect the equipment into an outlet on a circuit
different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
RF Exposure Informaion(MPE)
FCC RF warning statement: The device has been
evaluated to meet general RF exposure requirement.
The device can be used in portable exposure
condition without restriction.
8
AudioJets Quickstart Guide
H2
说明书
客 户
2013-06-14
Suesan
R1.0
技术要求：
物料编号：513-0230-
物料描述：H2说明书\Audiogets