OV2219 Wall-mounted Tablet User Manual V1.
Indications for Use/Intended Use The device is intended to provide HD displays of images and communications via network. The device is suitable for use in hospital operating rooms, surgical centers, clinics, doctors’ooffices and similar medical environments. Notes This equipment is for medical professionals. This equipment is intended for use in medical environments, such as clinics, examination rooms, and operating rooms. Warning To disconnect the main power, unplug the power plug.
Warning No modification of this equipment is allowed. Important safeguards and notices for use in the medical environments The unit generates, uses, and may radiate radio frequency energy. If it is not installed and used in accordance with the instruction manual, it may cause interference on other devices. If the unit causes interference (which can be determined by disconnecting the power cord from the unit), try the following. – Relocate the unit with respect to the affected devices.
On a Long Period of Use Due to the characteristics of device, displaying static images for extended periods, or using the unit repeatedly in a high temperature/high humidity environments may cause image smearing, burn-in, areas of which brightness is permanently changed, lines, or a decrease in overall brightness. In particular, continued display of an image smaller than the monitor screen, such as in a different aspect ratio, may shorten the life of the unit.
CE Marking CE marking is an administrative marking that indicates conformity with health, Safety, and environmental protection standards for products sold within the European Economic Area. RoHS Marking RoHS, also restricts the use (known as EEE).
Storage and transport requirements Storage and transport temperature This symbol indicates the acceptable temperature range for storage and transport environments. Storage and transport humidity This symbol indicates the acceptable humidity range for storage and transport environments. Storage and transport pressure This symbol indicates the acceptable atmospheric pressure range for storage and transport environments.
Indication: Manufacture will provide circuit diagrams, component part lists, descriptions, calibration instructions to assist to SERVICE PERSONNEL in parts repair. Contents Contents ........................................................................................................................................ 27 Appearance................................................................................................................................... 88 Accessories Included .......................
Appearance Optional accessories: 1. Vo IP 2.
Accessories Included 1. 2. 3. 4. 5. 6. 7. 21.5” Medical Grade Device AC/DC Charger Biometric Fingerprint Reader (optional) VoIP Phone (optional) User manual Pogo pin protection cover 4 VESA screws Keys Functions Recent Press this button to return home from any application or interface. Long press to launch Google Assistant. Located to the right of home button. Press it to open the recent items. Back Located to the left of home button. Press this icon to return to the previous screen.
Powering on device Please connect the AC/DC charger to the port. Make sure the flat surface of the power cord is faced down. Press the power button located at the bottom right of the device to power the device on. Installing the SD card Gently detach the cover/hood located on the back of the device. Flip the device and place the screen on a flat clean surface so the screen cannot be damaged. Insert the SD card in the corresponding slot. Be sure it is inserted all the way.
Wi-Fi Wi-Fi provides as much as 300 feet (100M) range of wireless network access and supports both 2.4GHz and 5GHz bands. If you use your device to connect to the internet, you should connect to a wireless access point. How to connect to a wireless network: Open settings and select Network & Internet, toggle the Wi-Fi setting on. Your device will automatically scan all wireless networks near you. Alternatively, pull down the notification bar and long-tap on the Wi-Fi icon.
Bluetooth How to turn on Bluetooth: Enter settings. Select Connected devices and toggle Bluetooth on, the status box will show this icon: Touch Pair new device, and all devices found will display in the list under the icon. . Pairing of a Bluetooth headset: Open Settings and select Connected devices, then open Bluetooth, touch Pair new device, then your device will scan for the Bluetooth devices within range and show discovered devices in the list beneath the icon.
Choose any device in the discovered list to initiate pairing. Bluetooth devices need a password to be paired, please ensure this information is to hand in order to successfully pair. The pairing and connected status will show under the headset in the Bluetooth devices list. When the headset is connected, the status box will show this icon ( ). You can now use the headset to make and receive calls or listen to media if supported. Contacts The Contacts app is used to store all user contacts on the device.
Calculator You can use the Calculator app to solve simple arithmetic problems or use its advanced mode to solve more complex equations. Enter numbers and arithmetic operators on the basic screen. Swipe left to open the advanced screen. Tap DEL to delete the last number or operation you entered, touch & hold DEL to delete everything on the display. Camera The camera is used for taking photos and video and can leverage both the front and rear facing cameras to achieve desired results.
Touch the “shutter” button on the screen to take pictures. Photos and videos will automatically save in the gallery and can be previewed by touching the bottom right (left in portrait) thumbnail. Change the settings by using the left -hand settings button. Take a video: Launch the video mode by tapping the icon in the Camera app.
Settings Network & Internet You can find Wi-Fi, Hotspot & tethering, VPN & Airplane mode in this section. Bluetooth Select Bluetooth touch the icon to open , will automatically be search nearby Bluetooth open the equipment. Display Brightness level: Adjust the screen brightness Wallpaper: The gallery and built-in wallpaper can be set as standby and lock screen wallpaper. Sleep: Adjust the delay before the screen automatically locks. Auto-rotate screen: On, Off.
Sound To prevent possible hearing damage, do not listen at high volume levels of long periods. Storage View the SD card and device memory usage. Manage external media Manage storage related settings For any AC/DC adapter, the socket-outlet must be installed near the equipment and shall be easily accessible. Apps & notifications Manage applications, including disabling of system apps and uninstallation of user apps.
Time Zone: Select Time Zone according to where you are. Time: Set the current time. Use 24 Hour Time Format:ON/OFF About device You can view your device information and details, including build version,w device hardware details, serial number, and OS version. Adaptor Input: 100-240Vac, 50-60Hz, 1.1A Output: 13.0Vdc, 3.69A, 47.
Immunity Test IEC 60601-1-2 Compliance level Test level Electrostatic discharge ±8 kV contact ±8 kV contact (ESD) IEC 61000-4-2 ±2 kV, ±4kV, ±8 kV, ±15 kV air Electrical fast ±2 kV for power supply lines ±2 kV for power supply lines ±1 kV for input/output lines ±1 kV for input/output lines ± 1 kV line(s) to line(s) ± 1 kV line(s) to line(s) ± 2 kV line(s) to earth ± 2 kV line(s) to earth 0 % UT; 0.5 cycle 0 % UT; 0.
1kHz sine 710 MHz 745 **Pulse 0.2 W 9 V/m 9 V/m 2W 28 28 V/m Modulation: 217Hz MHz 780 MHz 810 MHz 870 **Pulse Modulation: V/m 18Hz MHz 930 MHz 1720 MHz 1845 **Pulse 2W Modulation: 28 28 V/m V/m 217Hz MHz 1970 MHz 2450 MHz **Pulse 2W Modulation: 28 28 V/m V/m 217Hz 5240 MHz 5500 **Pulse 0.
Notices for the use of the device Your device has been made with utmost care and attention, and while it should handle some knocks and bumps, should be treated with care. The following suggestions can help you comply with the terms of repair warranty and help extend the life of your mobile device: High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. Avoid placing the device in extreme low temperature environments.
US Regulatory Information FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.
Frequency Bands and Power This mobile phone offers the following frequency bands in EU areas only and with the following maximum radio-frequency power: PENDING FREQUENCY RESULTS Wi-Fi 2.4GHz: <17.81dBm Wi-Fi 5GHz: <16.24dBm Bluetooth V4.2: <6.48dBm RFID 125kHz: <-3.10dBµA/m@10 m Distance RFID 13.56MHz: <1.71dBµA/m@10 m Distance Disposal Instructions Correctly dispose of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU.
Device label The device label will show on the below location: Oneview Healthcare Inc Block 2, Blackrock Business Park, Blackrock, Co. Dublin, A94 H2X4 Ireland Contact: John Paul Howe Email: jphowe@oneviewhealthcare.com Google, Google Play and other marks are trademarks of Google LLC.