ASSEMBLY INSTRUCTIONS MODEL 50-JN16DSKCO SUPPLIER CODE: JNFF LOFT WRITING DESK, CLASSIC OAK
Desktop maximum weight capacity = 150 lbs 2
PARTS AND HARDWARE LIST EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE. PART DESCRIPTION STOCK NO QTY 1 Desktop Frame 51-JN16DSK5DF 1 2 Leg 51-JN16DSK5LG 4 3 Desktop 51-JN16DSKCODT 1 4 Back Support Bar 51-JN16DSK5BB 1 5 Side Support Bar 51-JN16DSK5SB 2 6 Caster 51-JN16CA5 4 HARDWARE KIT STOCK # 51-JN16DSK5HA PART DESCRIPTION - READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING. - REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
ASSEMBLY INSTRUCTIONS NOTE: Some of the screws are of similar length. Observe carefully which screw is needed before beginning each step. STEP 1 Attach the legs (2) to the desktop frame (1) using eight screws (A). Ax8 2 E 1 A STEP 2 (i) Align the side support bars (5) with the legs (2). (ii) Fasten them with four screws (A) and four screws (B). (iii) Fasten the back support bar (4) to the side bars using four screws (C).
ASSEMBLY INSTRUCTIONS STEP 3 Screw a caster (6) into the bottom of each leg. 6 STEP 4 Attach the assembled frame to the desktop (3) with four screws (D) using the brackets on the desktop frame (1).
SAFETY AND MAINTENANCE • DO NOT stand on the desk. Do not use the desk as a stepladder. • • Every 6 months, check all bolts and screws to ensure they are tight. LIMITED WARRANTY PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year.
