PMID7102DC USER MANUAL
Content 1. Product ID Tablet PC 2. Notices for the use of Tablet PC 3. Unlocking, idle screen and applications menu 4. Dialing 5. Messaging 6. Contacts 7. Google Play store 8.
1. Notices for the use of Tablet PC CAUTION! Please read carefully this instructions and follow them, in the case of dagerous situations. Driving safety: It is recommended not to use the Tablet PC while driving. If you use it however, turn on the Handsfree mode. Turn off your Tablet PC while in an aircraft. Interference caused by Tablet PC affects aviation safety, and thus is illegal to use it on the plane. Please make sure that your Tablet PC is turned off when you are on the plane.
these applications. Any request or question regarding third party applications may be addressed to owners of these applications. 2. Device power on/off and standby After inserting the SIM card, and battery, start the Tablet PC by holding down the Power button for 3 seconds. To power off, press and hold the same button and confirm. If you press the Power button you will set Tablet PC in standby mode, to return shortly press the same button. 3.
To call a number, from the main screen open the dialer, dial the number and press the call key. To answer a call drag the icon to the right, and to reject the call drag the icon to the left. You can call numbers directly from Call log, touch the dial symbol from the right side of the desired number. 5.
- Enter contact information; - Finally, tap Save. Add new contact from call log: - From the applications menu, open the Dialer; - Tap the Tablet number you want to save; - Tap New contact button; - Select the memory where you will store: account or Tablet PC entry; - Enter contact information; - Finally, tap Save.
- Tick the option Sync contact; Customize contacts with photo Note: The contacts from SIM card cannot be customized with photo. To add a photo to one contacts follow the steps: - Open Contacts; - Touch the desired contact name; - On the top-right of the screen touch the contact editing symbol; - In the left corner of the screen touch the symbol to add image; -Select the input method of image: photo shoot or from gallery. 7.
Your service provider may default some device settings, so you may not be able to change these settings. WLAN Touch Wi-Fi switch to activate. Open Wi-Fi to search for available networks automatically. Networks without password can be used directly, for others you need to enter the password first. Bluetooth Touch Bluetooth switch to activate. Touch Bluetooth to enter the device searching screen. You can modify settings by pressing the Menu button.
This option allows you to set audio tones for incoming calls, e-mail alerts and SMS notifications. Settings include: Vibration, Volume, Tone Audio, Reviews Select General / Silent / Meeting / Outdoor profile by touching the right side circle. Power Saving You can choose one of the three power schemes: -Closed -Normal: calling and messaging are available; data connection remains the same state -Super-long standby: calling and messaging services remains in the same state. Display a.
Shows the list of the installed and downloaded applications, which of them are installed on SD CARD. Location Access to my location: enable applications to use your location information. GPS satellites: switch on/off the GPS receiver. Google Location Service™: let applications to use the WiFi or mobile network connection to get localization. Security 1) Set up screen locks: you can choose slide, pattern, PIN or password to unlock the screen.
Backup my data: backup my settings and data of other applications. Factory data reset: clear all data stored on the Tablet PC Accounts Add, manage and change synchronization options for the used accounts. Date and Time - Automatic date & time: use date and time provided by network or by GPS - Automatic time zone: check to use network-provided time zone - Set Date / Set time: touch to set date / time. 4) Selecting time zone Select Time Zone according to where you are.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
