SATURN 8700 Specifications Version 1.3 Notice This manual contains intellectual property including, but not limited to, trade secrets and know-how, operation procedures and production procedures that belong solely to oti. Disclosure, use, and/or production of any part of the above are strictly forbidden, except under a written license from oti. Confidential & Proprietary Version 1.
Saturn 8700 Specifications FCC Compliance Version 1.3 FCC Compliance This device (Saturn 8700) complies with Part 15, of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15, subpart C of the FCC Rules.
Saturn 8700 Specifications Table of Contents Version 1.3 Table of Contents FCC COMPLIANCE ......................................................................................................................................1 TABLE OF CONTENTS ................................................................................................................................2 TABLE OF FIGURES .......................................................................................................................
Saturn 8700 Specifications Table of Figures Version 1.3 Table of Figures Figure 1-1: SATURN 8700 ................................................................................................................5 Figure 2-1: SATURN 8700 landing zone and LEDs ........................................................................8 Figure 5-1: On Panel dimensions .....................................................................................................15 Figure 5-2:: Flush mount dimensions........
Saturn 8700 Specifications Revision history Version 1.3 Revision history Version Description Date 1.1 First version 28-June-2016 1.2 Updated photos, dimensions and technical specifications 10-July-2016 1.3 Add official models names (RS232, USB) at page 12. Minor text modifications.
Saturn 8700 Specifications Introduction Version 1.3 1 Introduction The SATURN 8700 is an ultra-compact, certified payment NFC Reader based on oti’s field proven technology which is specifically designed for payment and mass transit applications. Its compact design enables easy integration and installation in unattended self-service payment stations, such as ATMs, AVMs, TVMs, gaming and gambling machines, kiosks, access control gates and more.
Saturn 8700 Specifications Introduction Version 1.3 1.
Saturn 8700 Specifications Introduction Version 1.3 1.
Saturn 8700 Specifications Basic Contactless Operation Version 1.3 2 Basic Contactless Operation When a valid contactless payment card is presented to the reader, the reader performs a payment transaction with the contactless card. If the transaction is accepted, the unit will display a row of 4 LEDs that light up in sequence and the reader buzzer will inform the user about the transaction verdict. The reader then communicates the transaction data to the Host (POS).
Saturn 8700 Specifications Technical Specifications Version 1.3 3 Technical Specifications 3.
Saturn 8700 Specifications Technical Specifications Version 1.3 3.2 Product Technical Specifications The performance/electrical specifications for each feature of the SATURN 8700 reader are given in the table below. Table 3-1: Performance/Electrical Specifications Feature Specification RF Interface: RF Carrier Frequency 13.56 MHz RF Output 450mW (@50ohm load) Micro SIM push-push Interface Communication Links: USB, RS232 USB: 2.
Saturn 8700 Specifications Technical Specifications Version 1.3 Warning: Power supply minimum requirements Keeping the DC supply voltage within the specified allowed range is crucial to guarantee proper operation of the equipment. The use of AC rectified power supply source, which is not properly filtered, forms a risk of too low voltage dips and hence should be avoided. It is highly recommended to check this issue with proper tools (e.g. oscilloscope) during the reader installation.
Saturn 8700 Specifications Reader models Version 1.3 4 Reader models 4.1 SATURN 8700 RS232 The RS232 interface is implemented using a JST 10 pin connector (JST P/N BM10B-ZPDSS). Connector pin designation: 1. RS223 Rx 2. RS232 Tx 3. USB D4. Buzzer 1 5. USB D+ 6. Buzzer 2 7. GND (direct) 8. Vin 9. 5V 10. GND Ext (via common mode choke) Note: USB communication and external buzzer activation are not in OTI's standard products portfolio. 4.
Saturn 8700 Specifications Reader models Version 1.3 4.3 Interface cables 4.3.1 RS232 cable A JST 10 pin connector (JST P/N BM10B-ZPDSS) is available to access the reader full interface.
Saturn 8700 Specifications Reader models Version 1.3 4.3.2 USB Cable The USB cable (1.8m) has a mini-USB upstream connector on the reader side and a USB downstream connector on the host side. In this hardware configuration, the reader is USB powered, no additional power supply is required.
Saturn 8700 Specifications Dimensions Version 1.3 5 Dimensions The reader’s front and side view dimensions are given in this chapter. All the dimensions are in millimeters. 5.
Saturn 8700 Specifications Dimensions Version 1.3 5.
Saturn 8700 Specifications Dimensions Version 1.
Saturn 8700 Specifications SATURN 8700 Mounting Version 1.3 6 SATURN 8700 Mounting While the SATURN 8700 can be placed simply on the counter as a countertop reader connected to a terminal. It can also be mounted on an unattended devices such as ATM's and Vending Machines. This chapter describes the mounting options and procedures. The SATURN 8700 mounting possibilities include 3 main options, as illustrated below: 1. PM - on panel mounting. Rear RS232/USB cable connection. 2.
Saturn 8700 Specifications SATURN 8700 Mounting Version 1.3 6.1 On Panel Mounting The image below illustrates the SATURN 8700’s on panel mounting option. Figure 6-2: SATURN 8700 Mounting Studs 1. The SATURN 8700 is equipped with 4 mounting studs for front panel mounting. 2. The studs and cable are inserted through holes in the front panel. The nuts are fastened over the studs from the back of the front panel, protecting against potential attempts to dismantle the unit from the front.
Saturn 8700 Specifications SATURN 8700 Mounting Version 1.
Saturn 8700 Specifications SATURN 8700 Mounting Version 1.3 6.2 Flush Mounting The image below illustrates the SATURN 8700’s flush mounting option.
Saturn 8700 Specifications SATURN 8700 Mounting Version 1.3 Figure 6-6: SATURN 8700 Flush Mounting – Top View 1. The SATURN 8700 can be mounted flush with the front panel surface. 2. The flush mounting option requires a 63x80 mm cutout in the center of the non-metallic section of the front panel. 3. A mounting holder (green) in the back of the reader is tighten the device to the panel. A gasket that is separated between the device cover and the panel keep it waterproof.
Saturn 8700 Specifications SATURN 8700 Mounting Version 1.
Saturn 8700 Specifications SATURN 8700 Mounting Version 1.
Saturn 8700 Specifications Contact Us Version 1.3 7 Contact Us For oti America Technical Support (US and Canada): Phone: +1-732-429-1900 9:00 am to 5:00 pm Eastern time Monday – Friday Email: support@otiamerica.com For oti Technical Support (International): Phone: +972-4-6868000 (Ext. 8090) Email: info@otiglobal.