Federal Communications Commission Statement This advice complies with Part 15 of the FCC Rules. Operation Is subject to the following two conditions: » This device may rot case handrail Interference, and + Thistledown mustachio inferences received, kg Schedar that may cause vested operation. This equipment hes bean tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rues.
TABLE OF CONTENTS Introduction . System Components Overview A. Required Components B. Optional Components Operational Overview A. Main Consoles Unit B. Room Unit C. Desktop Unit D. Patio Unit E. Door Unit VI. Troubleshooting A. Contact Information B. Troubleshooting Guide C.
I. Introduction Congratulations! Your new home has been equipped with the inQuire™ 1000 Intercom System (see Figure 1) — which gives you the power of Instant communications throughout your home.
Il. System Components Overview A. System Components The following components (In addition to a suitable power supply) are typically utilized to make up the inQuire™ 1000 Intercom System (see Figure 2). Figure 2 * Intercom Module: This module is typically installed in the On-Q enclosure and is considered the “brains” of the system. All Rom Units, Door Units, Patio Units and the Main Console Unit are connected directly to the Intercom Module via “home run” style Cat 5e cabling.
Ill. Operational Overview The following section explains the various functions and operational features of the components of the In Quire 1000™. A. Main Console Unit Please refer to Figure 3 to familiarize yourself with the operation of the inQuire™ 1000 Main Console Unit. TALK: Depressing this button will allow you to communicate with all other active units. Hold In the TALK button while speaking, and let ft go when you are done.
B. Room Unit Please refer to Figure 4 to familiarize yourself with the operation of the inQuire™ 1000 Room Unit. TALK: Depressing this button will allow you to communicate with all other active units. Hold In the TALK button while speaking, and ist It go when you are dons. Your vocal wil be heard on the Main Console Unit, as well as any active Room, Patio, or Desktop Unit within the system. ANSWER LED: This LED ks located at the top of the keypad of the Room Ult.
C. Desktop Unit Please refer to Figure 5 to familiarize yourself with the operation of the inQuire™ 1000 Desktop Unit. TALK: Depressing this bunion will allow you to communicate with all other active units. Hold in the TALK bunion while speaking, and let it go when you ars done. Your voice will be heard on the Main Console Unit, as wall as any active Room, Patio, or Desktop Unit within the ANSWER LED: This LED is located at the top of the keypad of the Desktop Unit.
D. Patio Unk Please refer to Figure 6 to familiarize yourself with the operation of the inQuire™ 1000 Patio Unit. TALK: Depressing this bunion will allow you to communicate with all other active units. Hold in the TALK button while speaking, and let it go when you are done. Your vocal will be heard on the Main Console Unit, as well as any active Room, Plato, or Desktop Unit within the system. ANSWER LED: This LED I= located at the top of the keypad of the Patio Unit.
E. Door Unit Please refer to Figure 7 to familiarize yourself with the operation of the inQuire™ 1000 Door Unit. Door Chime Button: When a visitor pushes this button, the Door Chime wil be beard throughout the home at each active Intercom unit. The occupants of the home can then press the Door button at any Intercom unt to answer the door. The visitor will hear the occupant over the Door Unit speaker and be able fo talk to them over the Door Unit microphone.
VI. Troubleshooting This section will detail possible sclerotic to common problems that might occur in using the Granduncle InQuire™ 1000 Intercom System. A. Contact Information If you are unable to locate a solution here, please access our website at www granduncle com for the latest information. You can also reach us at 1-800-321-2343. B. Troubleshooting Guide Problem Solution -Hack Intercom Module power LED to verify that it is lit. If not, make sure power supply is plugged in.
from shipment, or through the end of the original warranty period, whichever is longer. On-Q makes no warranty with respect to products it sells that do not contain the authorized On-Q name or logo, and Customer, by acceptance of the product, agrees that its sole and exclusive remedy shall be against the manufacturer of such product.