Cut Sheet

301 Fulling Mill Road, Suite G
Middletown, PA 17057
Phone [phone]
www.legrand.us/onq
Page 1 of 3
SB006-IM
Integration Module – Outputting Video Door
Station and Camera Signals to Secondary
Video Devices
©Copyright 2011 by Legrand. All Rights Reserved.
I. Application/Purpose
This multi-purpose bulletin will outline how to expand the Unity Integration Module to support video
output to secondary video devices like an additional LCD(s) or an IP Video Server. It will also explain
how to output the video feed from both of the Video Door Stations plugged into the Q-Link Video
Ports on the Integration Module.
II. Associated Part Numbers
HA6001 – Unity Integration Module
IC5001 – Selective Call Intercom Module
IC5003 – Selective Call Video Door Station
CM1010 – LCD Module
CM1011 – CAT5 Camera Module
CM1015 – Y Splitter Patch Cable
CM1017 – Yellow Mini RCA Patch Cable
PW1060 – 24v 2.5 Amp Power Supply
PW1030 – 24v 1.5 Amp Power Supply
PW7725 – 12v 2.5 Amp Power Supply
III. Explanation
This bulletin assumes that the integration module has already been expanded to a full six cameras
using both the CAT5 Camera Module (CM1011) and the LCD Module (CM1010). Please refer to
Support Bulletin SB005-IM for more information on how to accomplish this expansion.
The most effective way to allow for the existing cameras on the system to output a video image to a
secondary video source is through the use of the Cat 5 Camera Module (CM1011). Any cameras
connected to this module should have their video output connected to the LCD module (CM1010),
which should then be tied to the Integration Module. To allow for the use of added LCDs on the
system, place Y splitters on the video outputs from the Cat 5 Camera Module. This will provide two
video outputs per camera. One output will continue to connect to the LCD module to allow for the
camera to be viewable in the camera menu on the Unity GUI (Graphic User Interface). The second
video output can be used to connect to a multitude of secondary video sources, including additional
LCD’s (see Note below), an IP Video Server or a third party DVR. Any video source that can take a
standard RCA video signal can work. (See FIGURE 1)
NOTE: Any secondary LCD screens added using this bulletin will not display the Unity GUI nor
will they function as an intercom station or a lyriQ audio station.