RFID SYSTEM V680 Series User’s Manual FL Remote ID V680-HAM42-FRT Antenna V680-HS63-SP ID Tag V680-D1KP66T-SP
Introduction Thank you for purchasing a V680-series RFID System. This manual describes the functions, performance, and application methods needed for optimum use of the V680-series RFID System. Please observe the following items when using the RFID System. • Allow the RFID System to be installed and operated only by qualified specialist with a sufficient knowledge of electrical systems. • Read and understand this manual before attempting to use the RFID System and use the RFID System correctly.
Warranty, Limitations of Liability < WARRANTY > OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS.
Application Considerations < SUITABILITY FOR USE > OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of the products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products.
Disclaimers < PERFORMANCE DATA > Performance data given in this manual is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. < CHANGE IN SPECIFICATIONS > Product specifications and accessories may be changed at any time based on improvements and other reasons.
Regulations and Standards The V680-HAM42-FRT and V680-HS63-SP conform to the following overseas regulations and standards. 1. Japan Japan Radio Law Equipment using high frequencies: Inductive Reading/Writing Communications Equipment Conforming standards: Inductive Reading/Writing Communications Equipment; Standard: ARIB STD-T82 2.
3. Europe EC Declaration of Conformity Hereby, OMRON Corporation declares that this RFID System, Antenna V680-HS63-SP and Amplifier V680-HAM42-FRT. Amplifier and Antenna are in compliance with essential requirements and other relevant provisions of Directive 1995/5/EC, and satisfy tests for the appropriate requirements of the following relevant standards. Radio : EN 300 330-2V1.1.1 (06-2001) EN 300 330-1V1.3.2 (12-2002) EMC : EN 301 489-3V1.4.1 (08-2002) EN 301 489-1V1.5.
Precautions for Safe Use Be sure to observe the following precautions to ensure safe use of the Products. 1. Do not use the Products in environments with flammable, explosive, or corrosive gasses. 2. Do not attempt to disassemble, repair, or modify any Product. 3. Tighten mounting screws securely. 4. If any cable has a locking mechanism, make sure that it has been locked before using the cable. 5. Do not allow water or pieces of wire to enter from openings in the case.
Precautions for Correct Use Always observe the following precautions to prevent operation failures, malfunctions, and adverse effects on performance and equipment. 1.
・Locations where the specified ambient storage temperature range is exceeded ・Locations subject to extreme temperature changes that may result in condensation ・Locations where the specified ambient storage humidity range is exceeded ・Locations where the product would be directly subjected to vibration or shock exceeding specifications ・Locations subject to contact with water, oil, or chemicals 4. Cleaning ・Do not use thinners for cleaning.
1. Meanings of Signal Words ....................................................................................................................5 1. Product overview...............................................................................................................................13 2. 1.1. Features.....................................................................................................................................13 1.2. System Configuration ...............................
3.1.4. Bit clear..............................................................................................................................26 3.1.5. Data fill ..............................................................................................................................27 3.1.6. Noise measurement..............................................................................................................28 3.2. 4. Timing chart ........................................................
1. 1.1. Product overview Features The RFID system: V680 series employs the electromagnetic induction type, and is a product in accordance with International Standard ISO/IEC18000-3(ISO/IEC15693) of the RFID system. 1.2.
2. Part names and functions 2.1. Part names Ethernet connector Power supply connector Antenna connector Display LED Node No.
- Antenna connector: connector for antenna 1 2 PIN No Name Description 1 S Signal 2 GND Analog ground Ｉ／Ｏ － － - Power supply connector: connected to the 24VDC power supply Please use the bundled connector. 1 3 PIN No 1 Name Description 24VDC terminal 2 ２４V GND Ground terminal 3 GR Functional earth terminal Please use recommended power supply unit: S8VS-03024.
- Display LED > DEV（Device Status indicator） Status Meaning Green Normal Red Serious malfunction Red(blinking) Slight malfunction Unlit Power off >RMT（Remote Status indicator） Status Meaning Green Connected to network/ Transferring FL Remote IO Green (blinking) Connected to network/ No transferring FL Remote IO Green and Red (blinking) Connected to network/ Setting error Red Duplicate node address Red (blinking) Not connected to network Unlit Not connected to network >TR(ID transmiss
- Node No. switch Please set node no. with the Node No. switch that is used as the low rank value of Internet Protocol address. 192.168.250. **. Item Description Setting method two BCD rotary switches Setting range 01 to 31 - Mode switch Please set the mode of FL REMOTE ID with the mode switch. No Name Description 0 Trigger mode When the trigger signal is input from the plc, FL REMOTE ID begins the communication with the ID tag, and outputs the communication result to the plc.
2.2. I/O Specifications 2.2.1. Allocated I/O The V680-HAM42-FRT occupies 64 input bits (4 words) and 64 output bits (4 words) of the Programmable Controller. The occupied CIO varies according to the node number that is set by the Node No. switch of V680-HAM42-FRT.
2.2.2. Signal functions Signal OD0-0 to 7 OD1-0 to 7 OD2-0 to 7 OD3-0 to 7 ADDR0 to 15 Name Data output Description Output write data to the ID tag Address Specify start address for reading or writing.
2.3. Memory map ID tag has a memory area of up to 1 Kbytes. Each address of the memory area specifies one byte. A single byte of data can be written to one address.
2.4. ID tag communication functions FL remote ID sets the operating mode with the mode switch, selects the command, adds the option that operates the command, and communicates with the ID tag. 2.4.1. Operational mode In the operating mode, there are three modes. 2.4.1.1. Trigger mode The ID tag installed in work or the palette is detected in the communication area of the antenna by the sensor or the switch, and the control signal (trigger signal) is output from the plc to FL REMOTE ID.
3. Communicating with the plc 3.1. Command correspondence 3.1.1.
3.1.2.
3.1.3.
3.1.4.
3.1.5.
3.1.6.
3.2. Timing chart ID tag ID tag in communication area TRG RUN BUSY NORM ERR1 ERR_SUB ID A B C D E F G H I J Ａ：The plc makes TRG “1" (on) and directs the execution to FL REMOTE ID. Ｂ：FL REMOTE ID fixes CMD (command), LEN (data length), and ADDR (start address), the communication with the ID tag begins, and BUSY is “1" (on). Ｃ：When the communication with the ID tag completed normally, FL REMOTE ID makes NORM "1" (on).
4. 4.1. Appendix Specifications - FL REMOTE ID V680-HAM42-FRT Characteristic Supply voltage Power consumption Ambient temperature Ambient humidity Insulation resistance Withstand voltage Vibration resistance Shock resistance Degree of protection Material Weight Mounting method Specification 24VDC（20.4VDC to 26.
- ID Tag V680-D1KP66T-SP Characteristic Memory capacity Specification 1,000 bytes (user area) Memory type EEPROM Data backup time 10 years after writing (85℃ or less) Data overwrite count Ambient temperature 100,000 times per address (25℃) Ambient humidity Vibration resistance Shock resistance Degree of protection Material Weight Mounting method Operating:-25 to +70℃, storage: -40 to +110℃ (no freezing, no dew condensation) Operating: 35 to 95%RH, storage: 35 to 95%RH (no freezing, no dew condensa
4.2.
- Antenna V680-HS63-SP - ID tag V680-D1KP66T-SP
