RFID System V680 Series User's Manual Amplifier and Antennas V680-HA63B V680-HS52 V680-HS63 ID Tags V680-D2KF52 V680-D2KF67 V680-D2KF67M Cat. No.
Introduction Thank you for purchasing a V680-series RFID System. This manual describes the functions, performance, and application methods needed for optimum use of the V680-series RFID System. Please observe the following items when using the RFID System. • Allow the RFID System to be installed and operated only by qualified specialist with a sufficient knowledge of electrical systems. • Read and understand this manual before attempting to use the RFID System and use the RFID System correctly.
READ AND UNDERSTAND THIS DOCUMENT Product Overview Section 2 Specifications and Performance Section 3 Communications Specifications Section 4 Installation Section 5 Chemical Resistance RFID System V680-HA63B V680-HS52 V680-HS63 V680-D2KF52 V680-D2KF67 V680-D2KF67M Amplifier Antenna Antenna ID Tag ID Tag ID Tag User's Manual Section 1 Section 2 Section 3 Section 4 Section 5 Section 1 Introduction Introduction
Introduction Introduction READ AND UNDERSTAND THIS DOCUMENT Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or comments. WARRANTY OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON.
Introduction Introduction Safety Precautions Alert Symbols for Safe Use The following symbols are used in this manual to indicate precautions that must be observed to ensure safe use of the V680-HS63, V680-HS52, and V680-HA63B. The precautions provided here contain important safety information. Be sure to observe these precautions. The following signal words are used in this manual.
Introduction Introduction 2. EC Declaration of Conformity Hereby, OMRON Corporation declares that this RFID System, Antenna V680-HS52, V680-HS63, and Amplifier V680HA63B.Amplifier and Antenna are in compliance with essential requirements and other relevant provisions of Directive 1995/5/EC, and satisfy tests for the appropriate requirements of the following relevant standards. Radio: EN 300 330-2V1.1.1 (06-2001) EN 300 330-1V1.3.1 (06-2001) EMC: EN 301 489-3V1.4.1 (08-2002) EN 301 489-1V1.4.
Introduction Introduction Precautions for Safe Use Be sure to observe the following precautions to ensure safe use of the Products. 1. Do not use the Products in environments with flammable, explosive, or corrosive gasses. 2. Do not attempt to disassemble, repair, or modify any Product. 3. Tighten mounting screws securely. 4. If any cable has a locking mechanism, make sure that it has been locked before using the cable. 5. Do not allow water or pieces of wire to enter from openings in the case.
Introduction Introduction Precautions for Correct Use Always observe the following precautions to prevent operation failures, malfunctions, and adverse effects on performance and equipment. 1. Installation Environment Do not use the Products in the following locations.
Introduction Introduction Meanings of Symbols Meanings of Symbols Indicates particularly important points related to a function, including precautions and application advice. Indicates page numbers containing relevant information.
Introduction Introduction MEMO Meanings of Symbols 8 RFID System User's Manual
Introduction Introduction Table of Contents Safety Precautions 3 Regulations and Standards 3 Precautions for Safe Use 5 Precautions for Correct Use 6 Meanings of Symbols 7 Table of Contents 9 Section 1 Product Overview 11 Features 12 Product Configuration 13 Section 2 Specifications and Performance 15 Antennas with Separate Amplifier 16 Amplifier 20 Tags 23 Section 3 Communications Specifications Communications Distances Section 4 Installation 27 28 31 Installing Antennas 32
Introduction Introduction 10 RFID System User's Manual
Section 1 Section 1 Product Overview 12 Product Configuration 13 RFID System User's Manual Product Overview Features 11
Section 1 Product Overview Features The V680-series RFID System actively supports many different types of system, such as distributed-control Section 1 Features systems and many-product, small-lot production systems, with non-contact data communications using electromagnetic induction. Non-contact Data Communications The V680 Series uses electromagnetic induction to enable non-contact, bi-directional data communications between Antennas and Tags.
Section 1 Product Overview Product Configuration A V680-series RFID System consists of an ID Controller, one or more Amplifiers, one or two Antennas, and Section 1 Product Configuration Tags. Select the models suitable for the application.
Section 1 Product Overview MEMO Section 1 Product Configuration 14 RFID System User’s Manual
Section 2 Specifications and Performance Section 2 16 Amplifier 20 Tags 23 RFID System User's Manual Specifications and Performance Antennas with Separate Amplifier 15
Section 2 Specifications and Performance Antennas with Separate Amplifier V680-HS63 General Specifications Item Model V680-HS63-W (Standard cable, waterproof connector) V680-HS63-R (Flexible cable, non-waterproof connector) Section 2 Antennas with Separate Amplifier Ambient operating temperature −10 to 60°C (with no icing) Ambient storage temperature −25 to 75°C (with no icing) Ambient operating humidity 35% to 95% (with no condensation) Insulation resistance 20 MΩ min.
Section 2 Specifications and Performance • V680-HS63-R Ferrite core 6 30 53 16.5 dia. Insulation cover 11 23 Note: Mounting Hole Dimensions Coil center 50 Coaxial cable, 5.3 dia., standard length: 2 m Operation indicator Section 2 Antennas with Separate Amplifier 27 5 16.5 dia 14.5 dia. 40 28±0.1 5 (39.5) (Unit: mm) Connector Two, M4 or 4.5 dia.
Section 2 Specifications and Performance V680-HS52 General Specifications Item Model V680-HS52-W (Standard cable, waterproof connector) V680-HS52-R (Flexible cable, non-waterproof connector) Section 2 Antennas with Separate Amplifier Ambient operating temperature −10 to 60°C (with no icing) Ambient storage temperature −25 to 75°C (with no icing) Ambient operating humidity 35% to 95% (with no condensation) Insulation resistance 20 MΩ min.
Section 2 Specifications and Performance • V680-HS52-R 22.5 dia. Two toothed washers Two lock nuts Mounting Hole Dimensions M22 ´ 1 16.5 dia 14.5 dia. 19.8 dia. 30 16.5 dia. (39.5) 35 dia. Insulation cover Connector Section 2 Antennas with Separate Amplifier Ferrite core Operation indicator 7 30 47.6 50 57 65 50 Coaxial cable, 5.3 dia.
Section 2 Specifications and Performance Amplifier V680-HA63B General Specifications Item Model V680-HA63B Section 2 Amplifier Ambient operating temperature −10 to 55°C ( with no icing) Ambient storage temperature −25 to 65°C ( with no icing) Ambient operating humidity 35% to 85% (with no condensation) Insulation resistance 20 MΩ min. (at 500 VDC) between cable terminals and case Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute between cable terminals and case.
Section 2 Specifications and Performance Nomenclature Antenna connection port Operation indicators Section 2 Amplifier RUN COMM NORM ERR LV6/7D LV5/7A LV4/76 LV3/72 LV2/71 LV1/70 Controller connector Antenna Connection Port The Antenna connection port is connected a V680-series Antenna. Controller Connector The Controller connector is connected to Antenna connection port on the Controller. Operation Indicators (LEDs) Name Color RUN Green Lit when the power is ON.
Section 2 Specifications and Performance Cables Specifications Item Model V700-A43/V700-A44 Number of conductors 10 Insulation resistance 5 MΩ min. (at 500 VDC) between terminals and sheath Dielectric strength 500 VAC, 1 min Item Model Length (L1) Weight V700-A43 V700-A44 Approx.10m Approx. 20 m Approx. 700 g Approx.1,350 g L1±100 49 6 dia. 15 dia. 51 15.5 dia.
Section 2 Specifications and Performance Tags Specifications and Dimensions V680-D2KF52 • General Specifications Model 680-D2KF52 Section 2 Tags Item Memory capacity 2,000 bytes (user area) Memory type FRAM Data backup time 10 years after writing(55°C) Data overwrite count 10 billion times per address (25°C) Ambient operating temperature when communicating −25 to 85°C (with no icing) Ambient operating temperature when not communicating −40 to85°C (with no icing) Ambient storage temperature
Section 2 Specifications and Performance V680-D2KF67/67M • General Specifications Item Model V680-D2KF67 V680-D2KF67M Section 2 Tags Memory capacity 2,000 bytes (user area) Memory type FRAM Data backup time 10 years after writing(55°C) Data overwrite count 10 billion times per address (25°C) Ambient operating temperature when communicating −25 to 85°C (with no icing) Ambient operating temperature when not communicating −40 to85°C (with no icing) Ambient storage temperature −40 to 85°C (
Section 2 Specifications and Performance • Dimensions V680-D2KF67/67M 8 0.2 8 (Unit:mm) 5.2 13.2 Section 2 Tags 4.5 Mounting Hole Dimensions 16 Two, 3.5 dia. 5.2 13.2 Two, M3 2 8 16 40+0.1 -0.5 32 0.2 16 8 16 32 40+0.1 -0.
Section 2 Specifications and Performance MEMO Section 2 Tags 26 RFID System User’s Manual
Section 3 Communications Specifications 28 Section 3 Communications Distances Communications Specifications RFID System User's Manual 27
Section 3 Communications Specifications Communications Distances V680-D2KF52 Communications Distance Specifications (Certified Performance) Amplifier V680-HA63B Section 3 Communications Distances Antenna ID Tag Communications distance V680-HS52 V680-D2KF52 V680-HS52 V680-D2KF52 embedded in metal (steel) V680-HS63 V680-D2KF52 Read 0 to 8.0 mm (Axis offset: ±2) Write 0 to 8.0 mm (Axis offset: ±2) Read 0 to 3.0 mm (Axis offset: ±2) Write 0 to 3.0 mm (Axis offset: ±2) Read 0 to 9.
Section 3 Communications Specifications V680-D2KF67 Communications Distance Specifications (Certified Performance) Amplifier Antenna V680-HS52 ID Tag Communications distance Read V680-D2KF67 V680-HA63B V680-HS63 V680-D2KF67 0 to 17.0 mm (Axis offset: ±2) Write 0 to 17.0 mm (Axis offset: ±2) Read 7 to 30.0 mm (Axis offset: ±10) Write 7 to 30.0 mm (Axis offset: ±10) • Measurement Conditions V680-HS63 Non-metallic material (Examples: Resin, plastic, wood, etc.
Section 3 Communications Specifications V680-D2KF67M Communications Distance Specifications (Certified Performance) Amplifier Antenna ID Tag Communications Distance V680-HS52 V680-D2KF67M with metal on back surface (steel) Read 0 to16.0 mm (Axis offset: ±2) Write 0 to 16.0 mm (Axis offset: ±2) V680-HS63 V680-D2KF67M with metal on back surface (steel) Read 6 to 25.0 mm (Axis offset: ±10) Write 6 to 25.
Section 4 Installation 32 Mounting Amplifiers 33 Installing Tags 37 Section 4 Installing Antennas Installation RFID System Uer's Manual 31
Section 4 Installation Installing Antennas V680-HS63 Installation from the Front Coil center Two, M4 holes 28+0.2 40 27 53 Section 4 Installing Antennas Installation from the Back Insert the nuts that come with the Antenna into sections A. Coil center Nut Two, 4.5 dia. holes A 28+0.2 27 Securely tighten screws to a maximum torque of 1.2 N⋅m. V680-HS52 Install the Antenna using the nuts and toothed washers that are provided on both sides of the mounting material, as shown in the diagram below.
Section 4 Installation Mounting Amplifiers V680-HA63 Mounting to DIN Track Spacers DIN Track Section 4 Mounting Amplifiers End Plate (See note 1.) 40 10 mm min. (See note 2.) Mounting hook Note 1. Consider the height of the DIN Track. 2. Provide a space of at least 10 mm (i.e., at least two spacers) and attach them securely. DIN Track PFP-100N2 End Plate PFP-M Spacer PFP-S A 1. When mounting the Amplifier to a DIN Track, first hook section A to the Track and then press in direction B.
Section 4 Installation Amplifier Cable Bending Radius or 35 er R reat g or 35 er R reat g Section 4 Mounting Amplifiers Do not bend the cable past a bending radius of 35 mm. Attaching/Removing V680-HA63/-HS63/-HS52 Connectors Attaching the Connector 1. Hold the Antenna connector, align the key, and insert the connector into the Amplifier connector. 2. Turn the connector clockwise to lock it in place. Key Antenna connector Removing the Connector 1.
Section 4 Installation Effect of Surrounding Metals on the Antenna (Reference) V680-HS63 In addition to surface mounting, it is also possible to embed the V680-HS63 in a metal casing to protect it from being struck by other objects. To prevent malfunctioning, allow a space of at least 30 mm between the Antenna and the sides of the metal casing. If the space is less than 30 mm, the read/write distance will be greatly diminished. In addition, the height of metal casing must not exceed that of the Antenna.
Section 4 Installation Mutual Interference between Antennas (Reference) To prevent malfunctioning due to mutual interference when using more than one Antenna, leave sufficient space between them as shown in the following diagrams. V680-HS63 • Installing the Antennas Facing Each Other • Installing the Antennas in Parallel 260 mm min. 420 mm min. Section 4 Mounting Amplifiers 36 V680-HS52 • Installing the Antennas Facing Each Other • Installing the Antennas in Parallel 100 mm min. 120 mm min.
Section 4 Installation Installing Tags V680-D1KP52MT Mutual Interference with Tags (Reference) Provide the mounting distances indicated below to prevent malfunctions due to mutual interference when using more than one Tag. 25 mm min. 25 mm min. Section 4 Installing Tags V680-D2KF67 Tag Installation Direction Secure the Tag with M3 screws. Tighten the screws to a Two, M3 torque of 0.3 to 0.5 N·m.
Section 4 Installation V680-D2KF67M Tag Installation Direction Mount the V680-D2KF67M to a metal surface, and Two, M3 secure the Tag with M3 screws. Tighten the screws to a torque of 0.3 to 0.5 N⋅m. 32 32 Section 4 Installing Tags 38 Mutual Interference with Tag (Reference) To prevent malfunctioning due to mutual interference when using more than one Tag, leave sufficient space between them as shown in the following diagram. 120mm min. RFID System User's Manual 120mm min.
Section 5 Chemical Resistance Chemical Resistance of the Antennas 40 Section 5 Chemical Resistance RFID System User's Manual 39
Section 5 Chemical Resistance Chemical Resistance of the Antennas Applicable Models V680-HS63-W/R V680-HS52-W/R ABS resin is used for case material and epoxy resin for filling material. Refer to the following lists and do not use chemicals that affect ABS and epoxy resin. Chemicals That Cause Deformations, Cracks, Etc.
Section 5 Chemical Resistance MEMO Section 5 Chemical Resistance of the Antennas RFID System User's Manual 41
Revision History A manual revision code appears as a suffix to the catalog number at the bottom of the front and rear pages. Cat. No.
6 ⊆ ΡΦΙ∆ Σψστεµ [ Υ [ Ψ } ϕ Α 43
