OPERATING INSTRUCTIONS Notes: ere hd the devices Inspect these items and ensure thatch = Once fully charged, the battery will last for approximately 6 uses at + L16 pu wre mat AIRES . 1 time per day for 30 minutes. Once the battery has been depleted, it 2. The devices are intact and working, takes about 8 hours to charge. 3. The AC adapter Is not broken or damaged.
PREPARING FOR USE STEP 1 RECHARGING THE BATTERY (continued) 2. Insert the AC adapter into an outlet. Outlet Mote: Only use the AC adapter provided with this device for recharging, 3. Set the device on the charger to initiate charging. = When charging the battery, the indicator blinks in orange. * When the battery is fully charged, the indicator light will go off. 17 4. Once the battery is fully charged, unplug the AC adapter and remove the devices from the charger.
PREPARING FOR USE STEP 3 ~ PAIRING THE DEVICE TO YOUR SMARTPHONE STEP 4 ATTACHING THE DEVICE ONTO THE PAD 1. “Turn on the device, following the app instructions. For first tire use, remove the pad from the sealed plastic bag and attach oo the device. Do not remove the plastic film at this time. 2. Confirm the device is paired successfully.
GET STARTED WITH YOUR THERAPY STEP 1 ~ SELECTING A TREATMENT AREA Before Use * Open the Moron TENS app. + Confirm the devices} is connected. » Make sure to always keep the smartphone near you during the session, Treatment Area Selection 1. Tap on one of the suggested locations to select the area you are going to place the pad. Select te by part yu wart in rns.
GET STARTED WITH YOUR THERAPY STEP 2 ~ PAD PLACEMENT Removing the Plastic Film Clean and dry treatment area so it is free of all lotions, oils and sweat. For the first time use, remove and discard the plastic film from the back The pad should be applied only to normal, intact, clean, healthy skin of the pad. that is not experiencing any swelling or inflammation. >< Plastic film Before therapy, make sure that the pads stick to the skin.
GET STARTED WITH YOUR THERAPY STEP 2 PAD PLACEMENT (continued) CIN NN LOWER BACK JOINT Place the pad on the lower back according to your pain. {ELBOW) For optimal therapy, place the pad on the muscle of the lower back, Do Place so that the pad is on either side of the joint with pain.
GET STARTED WITH YOUR THERAPY STEP 2 PAD PLACEMENT (continued) JOINT (KNEE) Place so that the pad is above the knee or below the joint with pain.
GET STARTED WITH YOUR THERAPY STEP 2 PAD PLACEMENT (continued) SHOULDER Place so that pad is on the shoulder where you feel pain. 4. Do not place this device across your chest or near your heart because the introduction of electrical current into the chest may cause rhythm disturbances to your heart.
GET STARTED WITH YOUR THERAPY AH NEVER APPLY THE PADS TO THESE BODY AREAS: not place the pads on or near (58) Do not place the pads on both sides (a the head, mouth or face. 9 of the chest cavity simultaneously (lateral or front and back), or Do not place the pads over your § Ly | across your chest because the neck because this could cause GS) introduction of electrical current severe muscle spasms resulting in may cause rhythm disturbances.
GET STARTED WITH YOUR THERAPY STEP 3 SELECTING A THERAPY 1. Tap “TENS” or “MICRO CURRENT” to select a therapy. Notes: « If you have already saved favorite settings, “FAVORITE” is displayed. To use your favorite setting, fap it and select a setting. «= If you selected “TENS”, you will then select a mode. Scroll through the Hat and select a mode. Refer to “9 MODES IN TENS AND MICRO CURRENT” on page 26 for more detail. 2. Select your session time. Swipe vertically to select the time.
GET STARTED WITH YOUR THERAPY 9 MODES IN TENS AND MICRO CURRENT Mode Potential What does the therapy conditions deliver? Mode Potential ‘What docs the therapy Recommended for Stiffness, sore or Medium to high rate tapping conditions deliver? Shoulder achy, tight feeling, and pulsations, STEADY Stiffness, soreness, Continuous pulsations at the Recommended for Swelling, stiffness, Low to medium rte tapping. tight feeling, or same rate. Joint sore or achy. Followed by tingling and achy. pulsations.
GET STARTED WITH YOUR THERAPY STEP 4 ~ STARTING A SESSION 1. The session screen opens and then you can select yon intensity level. the screen, tap increase or =) decrease the intensity to a comfortable level, = The session time starts to count down, « Tap to pause the session. Press it again to restart the session. = If you want to stop or interrupt the session, tap “QUIT” » White light on the device blinks during the session. 29:41 il rT 2.
edd il aT DIARY FUNCTION To register your pain level in the pain diary: 1. Tap the ® E# icon in the menu bar. 2. Select a body part that is aching. 3. Select from the various face icons on the app screen, then tap “OK”. » To cancel the registration, tap “Cancel”. « To add multiple body parts, repeat this step. . Tap “Register” to add this record to your pain history. FAVORITE FUNCTION You can register your favorite session (mode and time) during the session.
HOW TO CONTROL AND REDUCE YOUR PAIN ‘When Should 3 Session Start? ‘When to Stop Using the Device? Use Avail™ ag soon a8 your pain begins, Start with one session, Stop using the device if you experience an adverse reaction gin irritation/redness/burns, headache or other painful sensation) or if you Recommended Duration of Use feel any unusual discomfort. Start with one 30-minute session for TENS and MICRO CURRENT. Always turn the device off with the pads still on your skin.
AFTER DAILY USE ee LE TTT STORING THE PADS ON THE PAD HOLDER 2, Place the pad holder onto the storage case. = In between uses, keep the pads on the pad holder in the pad case. » Do not keep the device in areas subject to direct sunlight, high or low temperatures, lurid areas, near fire, vibration, or shock, 4h Never bend or fold the pads. Storage temperature 32 0 104 °C), relative humidity, « Make sure the device has been turned off.
ato creel le ‘With proper storage and use, you may extend the life of your pad to 30 Cleaning the Device uses. The life of the pads may vary due to skin and storage conditions. 1. Turn the device off, 2. Clean with a lightly moistened cloth and wipe gently. « Do not use chemicals (like thinner, benzene). « Do not let water get into the internal area of the device, Cleaning the Pads ‘When the pad has become dirty or soiled: 1. Remove the devise from the pad before cleaning the pads. 2.
APPENDIX To reset the device, follow the steps below: Try step 1 if any of the following situations scour; Step 1. Reset the Device « There is no response when the device’s power button is pressed. Press the reset button on the back of the device. « You want to clear all the information stored in your device. + You changed the smartphone to new one. *» You received another person's device that was paired with his/her smartphone. Step 2. Reset the Bluetooth Information in Your Smartphone 21.
TROUBLESHOOTING 33 If this happens... Possible causes... Try this solution... If this happens... Possible causes... Try this solution... The intensity is not Are the pads stacked Check placement of pads. The devise's power Ars the batteries Recharge the battery felt. together or do pads Refer to “Pad Placement” cannot be turned on. depleted? fully. The intensity level is overlap? on page 20.
TROUBLESHOOTING 34 If this happens... Possible causes... Try this solution... If this happens... Possible causes... Try this solution... Power cut off during Ts the battery charge Recharge the battery The adhesive side of The adhesive surface Replace the pad. use, extremely low? fully. the pad does not stick | of the pad may be Is the indicator light to skin, damaged.
TROUBLESHOOTING installed again? and follow step 1 and 2. 38 If this happens... Possible causes... Try this solution... If this happens... Possible causes... Try this solution... Unable to tap The pad may be Replace the pad. Connection failure. Had the devices been Refer to “Reset the “START” button. damaged. connected with Device” on page 32 Is the device power Turn on the device and another smartphone? and follow step 1-3. on? consent to the app.