Now preparing
Section 2 Communications Preparations Installing the USB Driver When connecting the Hand-held Reader Writer to the host device for the first time, the USB driver must be installed at the host device. Install the USB Driver in the Personal Computer Section 2 Installing the USB Driver The V600-CHUD supports Windows 2000 and Windows XP operating systems. Install the driver in the host device follwoing the procedure correspondign to the OS being used. Operation on other OS is not supported.
Section 2 Communications Preparations 4. Select Search for a suitable driver for my device (recommended) and then click the Next Button. Section 2 Installing the USB Driver 5. Select Specify a location and then click the Next Button. 6. Click the Browse Button, and select the folder in which the downloaded file RFID-Win2kcom.inf is saved.
Section 2 Communications Preparations 7. Click the Next Button. Section 2 Installing the USB Driver The following window will be displayed when software installation is completed. 8. Click the Finish Buttton.
Section 2 Communications Preparations Checking Installation Check that the driver is correctly installed. 1. Connect the Hand-held Reader Writer to the personal computer. Section 2 Installing the USB Driver 20 2. On the Start Menu, select Settings - Control Panel - System. 3. Select the Device Manager Button on the Hardware Tab Page.
Section 2 Communications Preparations 4. Select Ports (COM & LPT), and check that OMRON RFID USB COM is displayed. The driver is correctly installed if this port is displayed. Section 2 Installing the USB Driver Communications with the Hand-held Reader Writer can be performed with the port number displayed in parentheses after OMRON RFID USB COM.
Section 2 Communications Preparations • WindowsXP (SP1) 1. Turn ON the power to the personal computer and start Windows XP. Section 2 Installing the USB Driver 2. Connect the Hand-held Reader Writer to the personal computer. For details on connection methods, refer to Connections. p.16 Wait for the following window to be displayed. 3. When the following window is displayed, select Install from a list or specific location (Advanced) and click the Next Button.
Section 2 Communications Preparations 4. Click the Browse Button, and select the folder in which the downloaded file RFID-Win2kcom.inf is saved. Then click the Next Button. Section 2 Installing the USB Driver 5. Click the Continue Anyway Button. When the following window is displayed, installation is completed. 6. Click the Finish Button.
Section 2 Communications Preparations Checking Installation Check that the driver is correctly installed. 1. Connect the Hand-held Reader Writer to the personal computer. Section 2 Installing the USB Driver 24 2. On the Start Menu, select Control Panel - Performance and Maintenance. 3. Click the System Icon. 4. Click the Device Manager Button in the Hardware Tab Page.
Section 2 Communications Preparations 5. Select Ports (COM & LPT), and check that OMRON RFID USB COM is displayed. The driver is correctly installed if this port is displayed. Section 2 Installing the USB Driver Communications with the Hand-held Reader Writer can be performed with the port number displayed in parentheses after OMRON RFID USB COM.
Section 2 Communications Preparations Communications Test Test Run Procedure Section 2 Communications Test Connect the Hand-held Reader Writer to the host device. Visually check the indicator display. Execute the online test from the host Check communications between the host device and Hand-held Reader device. Writer using the test command. Test run the system. Finish 26 RFID System User's Manual Check operation using real commands.
Section 2 Communications Preparations Communications Test Between Host Device and Hand-held Reader Writer Use the test command to test communications between the Hand-held Reader Writer and host device. Before performing communications with the Data Carrier, check the Hand-held Reader Writer connections and communications. Section 2 Communications Test 1. Send the test command from the host device. For detail on the test command, refer to TEST (TS). p.78 2.
Section 2 Communications Preparations MEMO Section 2 Communications Test 28 RFID System User's Manual