Content Appearance ............................................................................................... 2 Charging .................................................................................................... 3 Inserting the Memory Card ...................................................................... 3 Turning on/off ........................................................................................... 4 Modes .....................................................................
Appearance 1 1: Microphone 2: Mode button 3: USB jack 4: Shutter button 5: Power button 2 4 3 5 6 6: Tripod slot 7: Record light 8: Mode indicator light 9: Power indicator light 10: Micro SD card slot 11: Reset 789 10 11 12: IR LED 13: Lens 12 6 13 2
Charging The camera has an internal lithium battery, Please charge the battery correctly before use. 1.Turns off the camera. 2.Connect the camera recorder to the computer though the USB cable to for battery charging. 3.when charging ,the power indicator light will turn red, and when the power indicator light turns off , it indicates charging full. 4.Unplug the USB cable. Turn on the camera when charging, the power indicator light will tun red and blue. And the camera can be operated when charging.
slot. 3: If the memory card has successfully be inserted, you can hear a clear buzzer. Turning on/off 1:Long press the power button to turn on the V1, and the power indicator light will turn blue. 2:Long press the power button again to turn off , and the light will flash. Modes Press the mode button to switch between the AP mode, the wifi mode, the video mode 1:Switching to AP mode , the mode indicator light will turn bright, and it can connect to the peripheral unit(cellphone) .
Long press the mode button in any mode to enter the WPS function, when connecting WIFI, the mode indicator light will fast flash, after connect correctly, the light will flash slowly. Connecting 1:Connecting though AP ① Install the App”Snooperscope” into your andriod/IOS cellphone or tablet PC. ② Turning on the camera, and it will enter the AP mode in default. And the mode light will turn blue. ③ Open the settings in your cellphone to set the wifi connect to the AP that the camera released.
2:Setting the wifi to the internet ① Open the camera in the APP, setup icon choose the camera , and click the . ② Find the advanced settings, and choose the “wifi setting”, then click the “manage wifi networks” ③ Choose a desire network that the camera linked, and write down the password of the network. ④ Ensure all the settings.
3: Control the camera through the internet After install and connect correctly to the internet, the camera can be controlled through the internet in every place where there can be connect to a internet. Of course, the camera should be in a network as well. Home open the new application”Snooperscope” . And connecting the IP camera.
device, live view photo , record ,about (at the bottom of the screen) . Device: default home page. including all settings , connections, and monitoring , etc. Live View : centralized to view all the IP cameras. Photo: view all pictures. record : store the recorded videos, you can view and replay them. if the devices cannot play the recorded videos, please install a player . For exam: storm. About : the version information of the software.
touch the icon to review the photos. touch the icon to take a snapshot . touch the icon to start recording a video. Press it again to stop. open the IR LED touch the icon to bring up: Mute: turn off the audio Listen: listen the audio recorded by the IP camera in the cellphone/tablet PC.
light flash once) and capture (the record light flash slowly) to the TF card through the APP on a cellphone. Also it can be controlled to record videos or capture images (the record light flash slowly)to the TF card by pressing the record button, long press it to record a video. While press it once to capture a image. Mount 1. Prepare the bracket provided in the accessories. 2. Insert the bracket to the tripod slot of the IP camera. 3. Screw up the nuts of the bracket to tie them up(as the image shows). 4.
Attention This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.