Instruction Manual for Cooktop OCC64TZ
Thank you for introducing our family to yours At Omega, we understand that cooking, cleaning and washing may not be your favourite things in the world. That's why we created a range of no-nonsense, reliable products that always get the job done for you. With the features you need and nothing you don't. What's more, they're made to fit perfectly into your home life and your wallet. You are welcoming an Omega appliance into your place and you can be sure it'll always serve you well.
TABLE OF CONTENTS Section Page Safety Description Installation Display How to use Cooking Advice Maintenance Trouble Shooting Technical Data Cleaning Electrical Connections 1-2 2 3-4 5 6 7 8 9 10 11
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. 1. This cooktop is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning the use of the cooktop by a person responsible for their safety.
21. All cabinetry and materials used in the installation must be able to withstand a minimum temperature of 100°C above ambient temperature whilst in use. Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage or discolouration at temperatures below the guidelines given above. Any damage caused by the cooktop being installed without adhering to the temperature limits set out above will be the liability of the owner.
INSTALLATION The adjacent furniture must be able to withstand a minimum temperature rise of 100°C above the ambient temperature of the room it is located in, during periods of use. The power supply to the cooktop must be cut off before any adjustments or maintenance work is done on it. The cooktop must be well ventilated (as per this manual) otherwise the cooktop will overheat.
INSTALLATION OF BUILT IN COOKTOP In order to prevent leakage of any liquids on the work bench and fix the cooktop to the bench, a special sealing tape is supplied together with your oven. Place the cooktop glass down on a clean cloth on a stable flat surface & apply this seal around the bottom edge of the cooktop (see below). Remove the backing from the sealing tape and then place the cooktop in position.
DISPLAY Sensitive touches Your ceramic cooktop is equipped with electronic controls with sensitive touch keys. When your finger touches the key, the corresponding command is activated. This activation is validated by a control light, a letter or a number in the display and/or a “beep” sound. Touch only one key at a time. Display 0 1...
USE Automatic cooking All the cooking zones are equipped with an automatic “go and stop” cooking device. The cooking zone starts at full power during a certain time, then reduces automatically its power on the preselected level. To begin automatic cooking, select a cooking zone and set the Power Display to 9. Once set at 9 repress the Plus Key, the Power Display will begin to flash "A". Using the Plus and Minus Keys, select the setting desired (see table below).
COOKING ADVICE Examples of power setting: (The values below are indicative) 1 to 2 Melting, Reheating Sauces, butter, chocolate, gelatine dishes prepared beforehand 2 to 3 Simmering, Defrosting Rice, pudding, sugar syrup dried vegetables, fish, frozen products 3 to 4 Steam Vegetables, fish, meat 4 to 5 Water Steamed potatoes, soups, pasta, fresh vegetables 6 to 7 Medium cooking, Simmering Meat, liver, eggs, sausages, 7 to 8 Cooking Potatoes, fritters, waffles 9 Frying, Roasting, Boiling
TROUBLESHOOTING The cooktop or the cooking zone doesn’t start-up: • • • • • The cooktop is badly connected to the electrical system. The protection fuse has blown. The locking function is activated The sensitive keys are covered by grease or water. An object is covering the control panel. The symbol [ E ] displays : • Call the After-sales Service. One or all cooking zones cut-off: • • • • The safety system has engaged You forgot to cut-off the cooking zone for a long time.
TECHNICAL DATA • • • • • • The installation of this appliance and the connection to the electrical network should be entrusted only to an electrician perfectly to the fact of the normative regulations and which respects them scrupulously. Protection against the parts under tension must be ensured after the building-in. The data of connection necessary are on the stickers place on the cooktop casing near the connection box.
CLEANING NOTE: Cleaning and maintenance operations must only be carried out when the cooktop is cool (all residual heat indicators are off). The cooktop should be disconnected from the power outlet or turned off at your isolation switch before commencing any cleaning process. Do not use plastic, plastic coated or aluminium cooking equipment on this cooktop. CLEANING THE COOKTOP Cookware with rough bases should not be used as they can scratch the glass ceramic surface.
ELECTRICAL CONNECTIONS LOCAL AUTHORITY REQUIREMENTS Installation is only permitted by a licensed electrician, and carried out according to instructions provided by the manufacturer. Incorrect installation might cause harm and damage, for which the manufacturer accepts no responsibility.
Head office: 104 Vanessa Street, Kingsgrove NSW 2208. Phone: (02) 9415 5000. Customer care: 1300 739 033. Address: 231 Bush road, Albany, North Shore City, Auckland, New Zealand 0632. Phone: (09) 415 6000.