Orange Wire {Negative Output Far Optional Starter Interrupt): The Orange wire is for a starter disable socket and relay. The function of this wire is to provide A B00mA Ground Output whenever the sourly sysadmin an ay nad slate. This output supplies Ground fo poe aids of the relay's coll. The other side of tha relay coil will be supplied with +12 Volts from the ignition switch, but only if the ignition switch armed the “hart position.
Conn act the starker disable sockets Rad wire lo the ignition switch side, and its White wire to the starter solenoid side, Be sure halt good, solid elpchicatconoesHons are made as this generally is a high amperage soul, Correction sadly: system Orange wine to the Orange wire of the starter disable socket, Note lf the. Prangs wire. touches. 12 volts positive directly or bas mare hair 3 SUGAR ground load, he chronicle will be damaged.
bin of the 3-pin stand up, this is the "H -marked side of the stand up: The stand up and jumper dre Shawn in the Wing Diagram Overview on pages 28:27, Upon repletion of all wing conceptions, consult the Operator's Guide section of this national and program feature #7 for the "Pulsed Hom” audible output setting: CONNECTION Ihe Brown wins may be connected directly to the vehicle's hom Switch wire, provided the circuit operates with 28 Amp of current or leas.
airbag giro ult with a standard fea light can cause the Airbag fo deploy! Connect the test light clip fo Ground, and probe ihe wire. if the hom sounds when probed, a direct correction may be made.