User's Manual

ManualsBrandsOMCONNECT ManualsElectronicsSmart Key Box

USER MANUAL

K12

www.omconnect.com

V3.0

Summary of content (11 pages)

PAGE 1
K12 USER MANUAL V3.0 www.omconnect.
PAGE 2
What’s Included 0 9 1 2 7 3 6 4 5 1 x KeyBox 2 x Mounting Screws Screw Driver x 1 01/16 HELLO 8 1 x HELLO Card 2 x Screws Anchors 2 x Screw Cap 1 x Reset Tool
PAGE 3
Model K12 Material Body Zinc Alloy, SUS304 Battery 4 x AAA Alkaline Battery Unlock Mechanism Bluetooth, PIN Code, App Jump Start USB-C / 7 - 4 Specification Inside Back ’0 ’ )20 11 Front m m( m m( 0 9 ’0 ’ )20 1 8 2 7 3 6 5 11 4 / Depth 22mm ( 4/5 ‘’ ) 7 - 4 120mm ( 4- 7/10‘’ ） 120mm ( 4- 7/10‘’ ） 02/16
PAGE 4
Features Lock&Unlock Administrator Unlock Set a Master Administrator PIN for Unlocking, settings, operations etc. and only the administrator could change the administrator PIN code. Anti-peeping Add up to 10 digits before and after PIN code to intensify your PINs. ....... User Unlock This KeyBox allows to add up to 100 user PIN codes for your family, friends and visitors. Auto Locking If there are no opening motions in 10 seconds the box will be automatically locked.
PAGE 5
Quick Start Step 1>Install Battery >. Remove the (4) screws on the battery cover AAA AAA AAA AAA >. Put 4 AAA batteries into the battery dock.
PAGE 6
Step 2>Download Mobile App >1. Scan QR Code below and download the App and turn on your mobile Bluetooth Step 3>Add Device >1.Go to App Home page, click Add Device or click “+” on the upper right.
PAGE 7
> 2. Press +9+ and enter Admin password + the KeyBox is ready to pair.
PAGE 8
Step 4>Change Admin Password-Initial Admin Password:123456 >1. Press and hold for 3 beeps 0 9 Enter 1 8 2 7 3 6 4 5 >2.
PAGE 9
Mechanical Instructions Password & Factory Mode: 1. Password Length Password must be 6 digits (no more no less) 2. Add User Password Press + 0 + until the blue light blinks >. Enter admin password + >. Enter new user password + >. Enter new user password again and press >. When the (Enter button) blinks in green, user password has been set. 3. Delete User Password Press + 2 + until the blue light blinks >. Enter admin password and press >. Enter the user password you wish to delete and press >.
PAGE 10
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.