User's Manual

User Manual for Omago Intelligent Diaper Sensor

Thank you for purchasing Omago Intelligent Diaper Sensor. Please read this User

Manual detail before starting to use Omago Intelligent Diaper Sensor and following the

instruction.

Package contents

1) Omago Intelligent Diaper Sensor

2) Omago Gateway

3) Strap

4) Power adaptor

5) User Manual

Omago Intelligent Diaper Sensor Gateway

Strap Power adaptor User manual

Product introduction

Conatin FCC ID: 2AC7Z-ESPWROOM02D

PAGE 1
User Manual for Omago Intelligent Diaper Sensor Thank you for purchasing Omago Intelligent Diaper Sensor. Please read this User Manual detail before starting to use Omago Intelligent Diaper Sensor and following the instruction.
PAGE 2
Getting Started 1. Please charge Omago Intelligent Diaper sensor battery fully before starting to use. 2. Download “Omago” APP from iOS App Store or Google Play and install. 3. Open “Oamgo” APP and register user detail. Installation 1. Press “+” on Device list 2. Select “Gateway” and scan the bar code on the bottom of Gateway. 3. Select “Diaper Sensor” and scan the bar code on Intelligent Diaper Sensor. You can find both Gateway and Intelligent Diaper Sensor on the device list. 4.
PAGE 3
Gateway inside 5 meter away from the baby for getting the best detection. You can press the button on the bottom of Gateway for recording the soothing music or voice to soothe the baby. The recording time is up to 40 seconds. Playback or stop the pre-recorded soothing music by pressing the button on APP.